yangchi Button Switch Instruction Manual

yangchi Button Switch

Gwybodaeth Cynnyrch

Enw Cynnyrch: Switsh
Swp/Rhif Cyfresol: Newid Botwm

Manufacturer & Eu Representative Info

Gwneuthurwr:
Enw'r Cwmni: Guangzhou yangchi auto parts co. LTD
Cyfeiriad: CN-2 # 1003 min joke Chuang, mining key ji yuan, tai he zhen, baryon district, Guangzhou.
E-bost: ouyan99@dingtalk.com
Ffôn: 86-13421389711
Cynrychiolydd Awdurdodedig yr UE:
Enw'r Cwmni: GWASANAETH CYNNYRCH CET LTD
Cyfeiriad: Osterholzallee 144 , 71636 Ludwigsburg Germany
E-bost: info.cetservice@gmail.com
Ffôn: Ffôn: +4971416432236

Gwybodaeth Cydymffurfiaeth

eVatmaster Consulting GmbH Bettinastr. 30 60325 Frankfurt am Main, yr Almaen contact@evatmaster.com

OST_EU_20220224000026

We simply act as EC representative for cross-border sellers, and are not manufacturers/importers/distributors for the product, nor involved in the manufacture/import/sale of the product. Therefore, we are not responsible for any after-sales services related to the product. In case of any product quality or infringement issues, the manufacturer/importer/seller shall be solely held responsible.

NODYN: This product must comply with all applicable safety and regulatory requirements in the market where it is sold. Sellers must assess which requirements and regulations apply based on the actual product type, function, and destination market.

Diogelwch a Rhybuddion

Gwybodaeth Ddiogelwch Bwysig

Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.\r\n·
Rhybudd: Keep the device and its cord out of reach of children under 3 years old.\r\n· Keep away from children unless supervised by an adult.\r\n·
Do not use this product for purposes other than its intended use.\r\n· Inspect the product before each use; do not use if damaged.\r\n· Follow installation and operation guidelines to avoid injury.\r\n.

Cyfarwyddiadau i'w Defnyddio

How to Replace a Faulty Window Switch:

Cam 1: Disconnect the negative battery terminal before working on the switch to prevent short circuit. Next, unclip the handles using a screw driver. Lift the faulty switch out of its harness.
Cam 2: If you don’t want to take off the door casing or the door handle, simply slide a flat-head screwdriver under The switch bezel and pry it until it loosens to access the housing.
Cam 3: Once the switch pops out of the bezel, disconnect it from the wire harness and detach it from the outlet. Remove the rockers before inserting a new switch into the harness holes.
Cam 4: Assemble the rockers into the new switch and snap the device into the bezel.