TRYDYDD REALITI WZ3 Smart Hub

Manylebau

• Enw: Hwb Clyfar WZ3
• Model: 01
• ID FCC: X
• IC: X
• Cysylltedd Di-wifr: Bluetooth, 2.4G Wi-Fi

Cyfarwyddiadau Defnydd Cynnyrch

Lawrlwythwch Ap Trydydd Realiti

1. Visit the Apple App Store and Google Play Store, and download the Third Reality App.
2. Open the app and follow the on-screen instructions to sign up or log in.

Sefydlu Third Reality Hub

1. Power on the hub until the LED light blinks blue and then changes to yellow, indicating pairing mode.
2. If not in pairing mode, long-press the reset button for about 15 seconds until the LED light turns red, then release.
3. Log in to the Third Reality App and add the hub by clicking on the plus icon.
4. Select Wi-Fi and Initialise the Hub by following the on-screen instructions.

DROSVIEW

Manylebau

Enw	Hwb Clyfar WZ3
Model	3RSH06027BWZ
ID Cyngor Sir y Fflint	2BAGQ-3RSH06027BWZ
IC	28296-3RSH06027
Dimensiynau	6.7cm×3.6cm ×5.4cm
Vol Gweithredutage	DC 5V
Cysylltedd Di-wifr	Zigbee 3.0 2.4GHz, Wi-Fi 802.11b/g/n 2.4GHz
Cyflwr gweithio	Defnydd Dan Do yn Unig
Amrediad Tymheredd	0 ℃ ~ 40 ℃

Lawrlwythwch Ap Trydydd Realiti

1. Visit the Apple App Store and Google Play Store, and download the Third Reality App.
2. Open the Third Reality App, and it will guide you through some quick steps to sign up or log in.
   • Nodyn: Sicrhewch fod gan eich ffôn Bluetooth wedi'i alluogi, sydd ei angen wrth ychwanegu dyfeisiau newydd. Rydym yn argymell creu cyfrif Trydydd Realiti gyda negeseuon e-bost go iawn, fel na fyddwch chi'n poeni am anghofio'r cyfrinair.
   • Sganiwch y cod QR am ragor o fanylion

Sefydlu Third Reality Hub

1. Power on the hub, the LED light on the hub is slowly blinking in blue for seconds and then changes to yellow, indicating that the hub is in pairing mode.
   • Nodyn: If the hub is not in pairing mode, long-press the reset button for about 15 seconds until the LED light turns on red and then release, it will slow blinking in yellow indicating that the hub is in pairing mode.
2. Log in to the Third Reality App, click “+” on the top right to add the hub.
3. Select Wi-Fi and Initialise Hub, and you will see the corresponding Mac No. of the hub.
   • Nodyn: Third Reality Hub can only support 2.4G Wi-Fi.
4. Yna y “Setup Complete”, cliciwch “Pair Device” i ychwanegu dyfeisiau clyfar eraill.
   • Nodyn: When the pair is completed, the LED light will stay blue.

Statws LED

LED	Dynodiad
Amrantu araf mewn melyn	Yn barod i sefydlu
Amrantu araf mewn glas	Mewn setup / Offine
Arhoswch ar las	Gosod wedi'i gwblhau / Ar-lein
Amrantu araf mewn gwyrdd	Pairing with Zigbee devices / Software updating

Dolen i Amazon Alexa

App: Alexa App

1. Make sure the software of your Echo Devices and, Alexa App are up to date.
2. Make sure the Hub is set up completely on the Third Reality App.
3. Open the Alexa App and log in, go to the page “More”, choose “Skills & Games” and search “ThirdReality”, then follow the prompts to enable “Third Reality Skills” and tap “DISCOVER DEVICES”.
4. Now you can also control the smart devices which connected to the Third Reality Hub in the Alexa App and create routines.

Dolen i Google Home

App: Google Home App

1. Make sure the software of the Google Assistant speaker and, Google App are up to date.
2. Make sure the Hub is set up completely on the Third Reality App.
3. Open the Google Home App and log in.
4. Cliciwch "+" ar y chwith uchaf, yna dewiswch "sefydlu dyfais", dewiswch "Gweithio gyda Google".
5. Or click the home page “Settings” and choose “Work with Google”, search “ThirdReality” and link your Third Reality account by authorizing.
6. Now you can control the other Zigbee devices in the Google Home App.

Datrys problemau

• Ailosod Ffatri
  • Pwyswch y botwm ailosod yn hir am tua 15 eiliad nes bod y golau LED yn troi'n goch ac yna'n rhyddhau, bydd yn araf amrantu mewn melyn gan nodi bod y canolbwynt yn y modd paru.
• Third Reality Hub shows always offline on the app
  • There may be network fluctuations and instability when the device is disconnected. Try to reconnect. If it still doesn’t work, try powering up the device and restarting the router.
• Sut i newid y Wi-Fi?
  • Press the reset button for about 3 seconds until the LED light turns on yellow and then release, go to Third Reality App, click the edit below the Wi-Fi icon and follow the steps to select the new Wi-Fi.

Rhybudd Cyngor Sir y Fflint

Mae'r ddyfais hon yn cydymffurfio â rhan 15 o Reolau Cyngor Sir y Fflint. Mae gweithredu yn amodol ar y ddau amod canlynol:

1. Efallai na fydd y ddyfais hon yn achosi ymyrraeth niweidiol
2. Rhaid i'r ddyfais hon dderbyn unrhyw ymyrraeth a dderbynnir, gan gynnwys ymyrraeth a allai achosi gweithrediad annymunol.

Gallai unrhyw newidiadau neu addasiadau na chymeradwywyd yn benodol gan y parti sy'n gyfrifol am gydymffurfio ddirymu awdurdod y defnyddiwr i weithredu'r offer.
Nodyn: This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Ailgyfeirio neu adleoli'r antena sy'n derbyn.
• Cynyddu'r gwahaniad rhwng yr offer a'r derbynnydd.
• Cysylltwch yr offer ag allfa ar gylched sy'n wahanol i'r hyn y mae'r derbynnydd wedi'i gysylltu ag ef.
• Cysylltwch â'r deliwr neu dechnegydd radio/teledu profiadol am gymorth.

Mae'r ddyfais hon yn cydymffurfio â therfynau amlygiad ymbelydredd Cyngor Sir y Fflint a nodir ar gyfer amgylchedd heb ei reoli. Dylid gosod a gweithredu'r ddyfais hon gydag isafswm pellter o 20cm rhwng y rheiddiadur a'ch corff.

Rhybudd IED:

Mae'r ddyfais hon yn cydymffurfio â safon(au) RSS heb drwydded Arloesi, Gwyddoniaeth a Datblygu Economaidd Canada (ISED). Mae gweithrediad yn amodol ar y ddau amod canlynol:

1. Efallai na fydd y ddyfais hon yn achosi ymyrraeth niweidiol,
2. Rhaid i'r ddyfais hon dderbyn unrhyw ymyrraeth a dderbynnir, gan gynnwys ymyrraeth a allai achosi gweithrediad annymunol.

Mae'r offer hwn yn cydymffurfio â therfynau amlygiad ymbelydredd IED a nodir ar gyfer amgylchedd heb ei reoli. Dylid gosod a gweithredu'r offer hwn gyda lleiafswm pellter o 20cm rhwng y rheiddiadur a'ch corff. Ni ddylai'r trosglwyddydd hwn gael ei gydleoli na gweithredu ar y cyd ag unrhyw antena neu drosglwyddydd arall.

Gwarant Cyfyngedig

• Am warant cyfyngedig, ewch i https://3reality.com/faq-help-center/
• Ar gyfer cymorth cwsmeriaid, cysylltwch â ni yn info@3realiti.com neu ymweld www.3realiti.com
• For questions on other platforms, visit the corresponding platform’s application/support platform

Dogfennau / Adnoddau

TRYDYDD REALITI WZ3 Smart Hub [pdfCanllaw Defnyddiwr 3RSH06027BWZ, 2BAGQ-3RSH06027BWZ, 2BAGQ3RSH06027BWZ, Hwb Clyfar WZ3, WZ3, Hwb Clyfar, Hwb

Cyfeiriadau

• Llawlyfr Defnyddiwr