TECTINTER Q103 Bluetooth Controller User Manual

TECTINTER Q103 Bluetooth Controller

Manylebau

• Model: C103
• Cydnawsedd: Android 9.0+, iOS 13.0+, Windows 10+, Switch, PS3
• Cysylltedd: Bluetooth, 2.4G Wireless, USB (Type-C)
• Gweithio Cyftage: DC 3.7V
• Cyfredol Gweithio: < 30mA
• Cwsg Cyfredol: < 5uA
• Codi Tâl Voltage/Cyfredol: DC 5V/500mA

Datrys problemau

• Rheolydd ddim yn cysylltu:
  • Gwnewch yn siŵr bod y rheolydd wedi'i wefru'n llawn.
  • Make sure the correct mode (X, V, S) is selected for your device.
  • Try re-pairing the controller by pressing the PAIR button and searching again on your device.
  • Sicrhewch fod Bluetooth wedi'i alluogi ar eich dyfais.
  • For 2.4G mode, ensure the USB dongle is properly inserted.
• Botymau ddim yn ymateb:
  • Check if the controller is connected. The LED indicator should be solid.
  • Try resetting the controller (R3 + L3).
  • Test the controller in a different game or application.
• Oediad mewnbwn:
  • Ensure you are within a reasonable range of your device (for Bluetooth/2.4G).
  • Lleihau ymyrraeth gan ddyfeisiau diwifr eraill.
  • Try connecting via USB cable if available.
• Nid yw'r rheolydd yn gwefru:
  • Ensure the Type-C cable is securely connected to both the controller and a power source.
  • Rhowch gynnig ar gebl Math-C neu addasydd pŵer gwahanol.
  • The LED indicator should show the charging status.

C103 Diagram swyddogaethol

1. Botwm D-pad
2. Botwm X/Y/A/B
3. HOME Reconnect/Power Button
4. Botwm PAIR
5. Botwm DEWIS
6. Botwm TURBO
7. Botwm Joystick/L3 Chwith
8. Botwm Joystick De/R3
9. Botwm CLEAR
10. Botwm DECHRAU
11. Botwm L.
12. Botwm L2
13. Porthladd Codi Tâl Math-C
14. Botwm R2
15. Botwm R
16. Ailosod twll
17. LED
18. Newid Modd

Android / iOS / Windows/QUBE
Android 9.0 / iOS 13.0 / Win 10 ac uwch

Cysylltiad Bluetooth

1. Trowch y switsh: Newidiwch i X i fynd i mewn i'r modd INPUT X.
2. Defnydd cyntaf (paru pŵer ymlaen):
   • Press the Pair button to start the pairing, and the LED will blink.
   • Turn on your device’s Bluetooth search and connect the Bluetooth device “Xbox Wireless Controller”.
   • Mae'r LED bob amser yn goch pan fydd ailgysylltu yn llwyddiannus.
3. Defnyddiwch eto (Ailgysylltu):
   1. Press the HOME button to power on, and the LED will blink slowly.
   2. Mae'r LED bob amser yn goch pan fydd ailgysylltu yn llwyddiannus.
4. Press the PAIR button to power off the device.

Modd SWITCH

Cysylltiad Bluetooth

1. Trowch y switsh: Newidiwch i S i fynd i mewn i'r modd Switch.
2. Defnydd cyntaf (paru pŵer ymlaen):
   a) Press the Pair button to start pairing, and the LED will blink.
   b) On the Switch console, select Controller
   → Change Grip/order to enter the Switch console pairing interface for pairing.
   Mae'r LED bob amser yn wyrdd pan fydd ailgysylltu yn llwyddiannus.
3. Defnyddiwch eto (Ailgysylltu):
   a) Press the HOME button to power on, and the LED will blink slowly.
   b) The LED is always green when reconnection is successful.
4. Press the PAIR button to power off the device.

ShootingPlus ar gyfer Android

Android 9.0 ac uwch

1. Flip the switch: Switch to V to enter the ShootingPlus mode. ( ShootingPlus App can be downloaded and installed in various mobile app markets.)
2. Defnydd cyntaf (paru pŵer ymlaen):
   a) Press the Pair button to start pairing, and the LED will blink.
   b) Turn on your device’s Bluetooth search and connect the Bluetooth device
   “Q103_ V3”
   a) Connection is successful.
3.  Defnyddiwch eto (Ailgysylltu):
   a) Press the HOME button to power on, and the LED will blink slowly.
   b) The LED is always cyan when reconnection is successful.
4. Pwyswch y botwm Pâr i bweru'r ddyfais.

2.4G receiver mode

• 2.4G wireless connection operation method for PC devices / smart TVs / TV boxes / PS3 hosts/QUBE:
  1. Insert the 2.4G wireless receiver into a PC device/smart TV,/The USB interface of the TV box.
  2. Wave switch: Set to G mode for 2.4G mode.
  3. First use (power on pairing):
     a) Press the PAIR pairing button to start pairing. The LED blue light flashes rapidly,
     The connection is successful, and the LED blue light is constantly on
  4. The LED is always cyan when reconnected-
  5. First use (power on pairing):
     Press the HOME button to power on and reconnect; the LED flashes slowly.
     Successful reconnection, LED blue light stays on
  6. Press the PAIR pairing button to turn off the device
  7. You can start operating the games downloaded and installed on PC devices/smart TV/TV box/PS3 consoles/QUBE.

Uwchraddio cadarnwedd

1. Cysylltwch y V file to the Android phone ShootingPlus app for software upgrade.
2. Support USB wired upgrade

Gosodiadau ffon reoli

• Graddnodi Rocker
• Shake the joystick several times in the off state and then turn on the machine. Please do not touch the joystick when turning on the machine. The joystick will be automatically calibrated.
• Joysticks draw a square or a circle
•  + (default is circle).
• Note: The R3 Button is pressed with the Right Joystick.

Paramedrau trydanol

• Gweithio cyftagE: DC3.7V
• Cerrynt gweithio: <30mA
• Cerrynt cwsg: <5uA
• Specification: DC5V/500mA
• Bluetooth transmission distance: <= 8M Battery capacity: 400mAh
• Amser wrth gefn: 30 diwrnod (codi tâl llawn)

Charging / sleep/wake-up

1. When charging, the LED will blink slowly; When the battery is full, the LED will stay bright.
2. Swyddogaeth Cwsg / Deffro:
   In pairing state, the controller will sleep if it’s not paired successfully within 1 minute.
   Connect back state: The controller will sleep if it is not connected back within 1 minute.
   Bluetooth is connected: The controller will sleep if it is not used within 5 minutes.
   Press the Pair button to turn off the device. Short press the HOME button to directly reconnect.
3. If pairing is not successful within 1 minute, it will enter sleep mode.

Rhybudd Cyngor Sir y Fflint

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, a nd can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cauharmful interferencec e to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Ailgyfeirio neu adleoli'r antena sy'n derbyn.
• Cynyddu'r gwahaniad rhwng yr offer a'r derbynnydd.
• Cysylltwch yr offer ag allfa ar gylched sy'n wahanol i'r un y mae'r derbynnydd wedi'i gysylltu ag ef.
• Cysylltwch â'r deliwr neu dechnegydd radio/teledu profiadol am gymorth.

Rhybudd: Gallai unrhyw newidiadau neu addasiadau i'r ddyfais hon nad ydynt wedi'u cymeradwyo'n benodol gan y gwneuthurwr ddirymu eich awdurdod i weithredu'r offer hwn.
Mae'r ddyfais hon yn cydymffurfio â rhan 15 o Reolau Cyngor Sir y Fflint. Mae gweithredu yn amodol ar y ddau amod canlynol:

1. Efallai na fydd y ddyfais hon yn achosi ymyrraeth niweidiol, a
2. Rhaid i'r ddyfais hon dderbyn unrhyw ymyrraeth a dderbynnir, gan gynnwys ymyrraeth a allai achosi gweithrediad annymunol.

Mae'r offer hwn yn cydymffurfio â therfynau amlygiad ymbelydredd Cyngor Sir y Fflint a osodwyd ar gyfer amgylchedd heb ei reoli. Dylid gosod a gweithredu'r offer hwn gyda lleiafswm pellter o 0cm rhwng y rheiddiadur a'ch corff.