Solutions MS-TP Programmable Touch Panel
Hysbysiad Hawlfraint
Ni ellir clonio, copïo na chyfieithu holl gynnwys y llawlyfr hwn, y mae ei hawlfraint yn perthyn i'n corfforaeth, heb ganiatâd y cwmni.
Mae manylebau cynnyrch a gwybodaeth y cyfeiriwyd atynt yn y ddogfen hon er gwybodaeth yn unig. Gallwn newid, dileu neu ddiweddaru unrhyw gynnwys ar unrhyw adeg a heb rybudd ymlaen llaw.
Hysbysiad Cyngor Sir y Fflint
Mae'r cynnyrch hwn yn cydymffurfio â Rhan 15 o Reolau Cyngor Sir y Fflint. Mae'r llawdriniaeth yn ddarostyngedig i'r ddau amod canlynol:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, includ- ing interference that may cause undesired operation.delete, or update any content at any time and without prior notice.
Mae'r cynnyrch hwn wedi'i brofi a chanfuwyd ei fod yn cydymffurfio â'r terfynau ar gyfer dyfais ddigidol Dosbarth A, yn unol â Rhan 15 o Reolau Cyngor Sir y Fflint. Mae'r terfynau hyn wedi'u cynllunio i ddarparu amddiffyniad rhesymol rhag ymyrraeth niweidiol mewn gosodiad preswyl. Mae'r offer hwn yn cynhyrchu defnyddiau a gall belydru ynni amledd radio ac, os na chaiff ei osod a'i ddefnyddio yn unol â'r cyfarwyddiadau, gall achosi ymyrraeth niweidiol i gyfathrebiadau radio. Fodd bynnag, nid oes unrhyw sicrwydd na fydd ymyrraeth yn digwydd mewn gosodiad penodol. Os yw'r offer hwn yn achosi ymyrraeth niweidiol i dderbyniad radio neu deledu, y gellir ei bennu trwy droi'r offer i ffwrdd ac ymlaen, anogir y defnyddiwr i geisio cywiro'r ymyrraeth gan un neu fwy o'r mesurau canlynol:
- Ailgyfeirio neu adleoli'r antena sy'n derbyn.
- Cynyddu'r gwahaniad rhwng yr offer a'r derbynnydd.
- Cysylltwch yr offer ag allfa ar gylched sy'n wahanol i'r un y mae'r derbynnydd wedi'i gysylltu ag ef.
- Cysylltwch â'r deliwr neu dechnegydd radio/teledu profiadol am gymorth.
AGA Dosbarth A
Mae AGA Dosbarth A yn gategori o’r holl AGA arall sy’n bodloni terfynau AGA dosbarth A ond nid y terfynau AGA dosbarth B. Ni ddylid cyfyngu ar werthu offer o’r fath ond bydd y rhybudd canlynol yn cael ei gynnwys yn y cyfarwyddiadau defnyddio:
Rhybudd
Gall gweithredu'r offer hwn mewn amgylchedd preswyl achosi ymyrraeth radio.
EC Compliance Statement
(Dosbarth A)
Cadarnheir drwy hyn bod y cynnyrch hwn yn cydymffurfio â'r gofynion a nodir yng Nghyfarwyddebau'r Cyngor ar Brasamcanu cyfreithiau'r Aelod-wladwriaethau sy'n ymwneud â Chyfarwyddeb Cydnawsedd Electromagnetig 2014/30/EU.
Amddiffyniad Ymchwydd
This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lighting strikes, etc. Use of surge protection systems is highly recommended in order to protect and extend the life of
your equipment..
Rhybudd
The network cable connection method required for this product is direct connection. Please do not cross-connect.
Rhagymadrodd
The MS-TP programmable touch panel, designed for automated office systems, multimedia rooms, and smart homes, features a configurable interactive user interface and intelligent networking capabilities. This wall-mounted panel, compatible with standard 86-box installations, includes a 720×720 capacitive touchscreen and one RS-232 serial port. It supports diverse applications across industries, including multimedia conference rooms, multi-functional halls, training centers, showrooms, broadcasting studios, and industrial automation.
Nodweddion Allweddol
- ARM Cortex-A55 architecture 1.8Ghz
- Android 11.0 system, 4GB DDR4 RAM, 32GB EMMC Flash
- 4 inch 720*720 (1:1) resolution, capacitive touch screen, standard 86 box wall-in design
- Dual-mode operation – functions as either a touchscreen central control or a user terminal.
- Customizable interface and function configuration through PC software
- Cydymffurfio â phrotocolau cyfathrebu rhwydwaith safonol y diwydiant (TCP/IP, Http, CDU, Websoced)
- Standard 1Gbps network port
- Dual power supply mode, supporting POE or an independent DC power supply
Cynnwys Pecyn
- A1x Programmable Touch Panel (Wall-in)
- 1x 3pin-3.81mm Phoenix Connectors (male)
- 1x 24V/1A Multinational Power Supply (2pin-3.81mm Phoenix Connector)
- Braced Mowntio Wal 1x
- 2x Bracket Fixing Screw
- Llawlyfr Defnyddiwr 1x
Manylebau
| Technegol | |
| CPU: | ARM Cortex-A55 1.8GHz |
| System weithredu: | Android 11 |
| RAM: | 4GB DDR4 RAM |
| Cof fflach: | Flash EMMC 32GB |
| Penderfyniad: | 720*720 |
| Math cyffwrdd: | Sgrin Cyffwrdd Capacitive |
| Diogelu ESD: | IEC 61000-4-2: ±8kV (rhyddhau bwlch aer) a ±4kV (rhyddhau cyswllt) |
| Cysylltiad | |
| RS232: | Connectors Phoenix 1x 3-pin |
| LAN/POE: | Porthladd Ethernet RJ1 10x Safonol 100M / 1000M / 45M, yn cefnogi swyddogaeth POE |
| PŴER: | 1x 2-pin Phoenix Connectors, for power supply or POE |
| DEBUG: | 1x Micro USB, system debugging port |
| Mecanyddol | |
| Tai: | Front Pane: Touch Screen; Frame: A uminum A oy Rear Case: P astic |
| Lliw: | Front Pane: Back; Frame: Gray Rear Case: White |
| Dimensiynau: | 86mm (L) x 86mm (W) x 44mm (D) |
| Pwysau: | 192g |
| Cyflenwad pŵer: | 24V DC/1A neu POE |
| Defnydd pŵer: | 5W |
| Tymheredd gweithredu: | 0°C ~ 40°C / 32°F ~ 104°F |
| Tymheredd storio: | -4 ° F ~ 140 ° F / -20 ° C ~ 60 ° C. |
| Lleithder gweithredu: | 20% ~ 80% (lleithder cymharol, nad yw'n cyddwyso) |
| Lleithder storio: | 10% ~ 90% (lleithder cymharol, nad yw'n cyddwyso) |
Rheolaethau a Swyddogaethau Gweithredu
| Rhif | Enw | Disgrifiad Swyddogaeth |
| 1 | Sgrin gyffwrdd | Capacitive touch screen. The user contro interface can be configured through the configuration too . |
|
2 |
AILOSOD botwm |
Reboot: After the device boots up, press and ho d the RESET button for more than 1s
less than 5s, then release it, the device wi reboot. The device won’t upload the user projects after rebooting. Reset: After the device boots up, press and ho d the RESET button for more than 5 seconds, then release it, the device writes the user configuration information. The IP wi be restored to the default settings (IP address: 192.168.0.101, subnet mask: 255.255.0.0), the ogin password of the management page wi be initialized to “admin”, the device time wi be initialized to automatic acquisition mode, but user projects won’t be deleted by factory initialization. |
| 3 | botwm POWER | Defnyddir ar gyfer sgrin i ffwrdd neu ddeffro. |
| 4 | Porth USB | Porthladd micro USB. Y porthladd neilltuedig ar gyfer dadfygio system. |
|
5 |
Porthladd LAN / PoE |
Standard 10M/100M/1000M Ethernet RJ45 port with default auto-negotiated speed for device connection, projects uploading & down oading, network communication and debugging. By default, the DHCP function of the contro pane is disabled, and the IP setting is as follows: IP address: 192.168.0.101, subnet mask: 255.255.0.0 |
| 6 | POWER porthladd | The power input port (2-PIN phoenix connectors), used for connecting with externa 24V DC power supply. |
|
7 |
Porthladd RS232 |
Programmable RS232 seria port, which is a 3-pin phoenix connector (ma e), compliant with RS232 communication protocol. The pin-outs of the RS232 port are PIN1 for TX, PIN2 for GND, and PIN3 for RX. |
Cyfarwyddiadau Mowntio
This wall-in touch panel can be mounted on a standard 86 wall box, the mounting steps are as follows:
Cam 1: Install the included wall mounting bracket onto the 86 wall box and fasten it with 2 screws.
Cam 2: Align the back of the touch panel with the slots of the wall bracket and push it in. Press the aluminum edge of the touch panel to ensure that the buckles are in place, and the installation is complete.
To remove the mounted touch panel, insert a screwdriver into the two holes indicated by the arrows and pry the machine out of the bottom box.
FAQ
Q: Can I use this touch panel without surge protection?
Q: What type of network connection is required for this product?
Dogfennau / Adnoddau
 | MS-TP Programmable Touch Panel |
Cyfeiriadau
- Un eiliad, os gwelwch yn dda...www.m4sol.com
- Llawlyfr Defnyddiwrmanual.tools