SAL PIXIE Aircon Controller
Rhagair
IMPORTANT: IN THE INTEREST OF PRODUCT PERFORMANCE AND SAFETY, PLEASE READ THESE INSTRUCTIONS AND THE WARRANTY BEFORE INSTALLING THE PRODUCT.
Mae cynhyrchion SAL wedi'u cynllunio yn unol â'r holl Safonau Rhyngwladol ac Awstralia gorfodol, sy'n gofyn am osod yn unol ag AS / NZS3000 gan osodwr cymwys a glanhau a chynnal a chadw'r offer yn rheolaidd. Gwerthir cynhyrchion yn unol â'r cyfarwyddiadau canlynol a thelerau ac amodau gwerthu safonol SAL, sydd ar gael trwy www.sal.net.au.
Oherwydd diweddariadau cynnyrch a gwybodaeth parhaus, ni fydd data cynnyrch a gafwyd o sal.net.au yn rhan o unrhyw gontract a / neu warant perfformiad technegol oni bai bod SAL wedi'i gadarnhau'n benodol yn ysgrifenedig ar adeg archebu. Mae'r lluniadau ffrâm weiren cynnyrch yn y ddogfen hon wedi'u bwriadu at ddibenion darlunio yn unig a gallant fod yn wahanol i'r cynnyrch ffisegol terfynol. Gall y cyfarwyddyd gosod newid heb rybudd ymlaen llaw.
Cyflwyniad Cynnyrch
PIXIE Aircon Controller is designed to control Daikin ducted aircons, with simple wiring to indoor units. Eachair conditioningn indoor unit requires one PIXIE Aircon Controller.
Darlun cynnyrch
Nodweddion Cynnyrch
- Control Daikin ducted aircons (check section 4.1 for compatibility list)
- Gwifrau syml
- Can co-exist with one Daikin official wired remote controller
- Physical buttons to facilitate commissioning and testing
- In-built LED indicators for clear status indication
Mae'r Pecyn yn cynnwys
- PIXIE Aircon Controller – DK * 1
- Canllaw Cychwyn Cyflym * 1
*All drawings shown are for illustrative purposes only, actual product may vary due to product enhancement.
Manylebau
Gosod a Gwifrau
Daikin Indoor Unit Compatibility**
Please confirm the compatibility before installation. Compatible with (as of Nov 2025):
Premium Inverter Ducted,
FDYA 71/85/100/125/140/160 AV19, FDYQ 180/200/250 LCV1
Inverter Ducted,
FDYAN 50/60/71/85/100/125/140/160 AV1, FDYQN 180/200 LCV1, FDYQN250LBV1
Slimline Ducted,
FBA 50/60 BAVMA, FBA 71/85/100/125/140 BVMA
Bulkhead System,
- FDYBA 25/35/50/60/71 AV1
- **This list is compiled as of Oct 2025 and subject to change without prior notice.
Paratoi
Please make sure theair conditioningn system operates properly with its official wired remote controller.
Gosodiad
- Turn OFF the electricity supply to the air conditioner.
- Connect the PIXIE Aircon Controller to the indoor unit as per the wiring diagram (There is no polarity requirement for the P1 and P2 terminals).
- Switch ON the electricity supply to the aircon, allow the aircon wired remote controller to initiate, wait until it displays and operates as normal.
- Check the LED indicators on the PIXIE Aircon Controller. When the top indicator (Bluetooth) is white, and the Stat indicator is in solid blue, this controller is ready for commissioning.
- Add this PIXIE Aircon Controller to the PIXIE or PIXIE PLUS App, and enjoy the smart.
Gweithrediad
Botwm Gosod
Single click: Turn ON/OFF the aircon. When the aircon is OFF, the Mode LED indicator is flashing in white. When the aircon is ON, the Mode LED indicator is lit in a solid color.
Quickly 4 Clicks: The PIXIE Aircon Controller enters pairing mode. In this mode, the top LED indicator (Bluetooth) will flash in blue and white; it will stop flashing when a pairing process is finalised or in 30 seconds, whichever occurs earlier.
Quickly 9 Clicks: Reset the PIXIE Aircon Controller to factory default. The top LED indicator (Bluetooth) will flash in blue and white for 3 seconds, then stay on white.
Ctrl Button (Control Button)The
Ctrl Button (control button) is only functional when the aircon is ON.
Single click: Switch the aircon to the next mode, cycling through COOL -> HEAT -> DRY -> FAN.
Newid DIP
Please set to OFF for most applications.
Dangosyddion LED
Sut i lawrlwytho'r App
- Scan the QR code or go to the App Store (IOS) or Google Play (Android) to download the free PIXIE app to your smartphone.
- IOS: Requires IOS 6.0 or later. Compatible with iPhone, iPad,a nd iPod touch
- Android: Requires Android 4.4 or above; devices must support Bluetooth 4.0
- Mae'r manylebau uchod ar gyfer cyfeirio yn unig a gallant amrywio heb rybudd ymlaen llaw.
Gwarant
In accordance with SAL’s standard terms and conditions of sale, SAL warrants this product to be free from defects in materials and or workmanship for a period as stated below for goods not subject to incorrect installation, maintenance, operation, mishandling, environmental, unauthorised modification,s or electrical operating conditions outside the nominated product specification as detailed in these installation instructions.
Mae'r manteision a roddir i chi gan y warant hon yn ychwanegol at hawliau a rhwymedïau eraill sydd gennych o dan y gyfraith. Daw ein nwyddau gyda gwarantau na ellir eu heithrio o dan Gyfraith Defnyddwyr Awstralia. Mae gennych hawl i gael nwyddau newydd neu ad-daliad am fethiant mawr ac iawndal am unrhyw golled neu ddifrod arall y gellir ei ragweld yn rhesymol. Mae gennych hefyd hawl i gael y nwyddau wedi'u hatgyweirio neu eu disodli os nad yw'r nwyddau o ansawdd derbyniol ac nad yw'r methiant yn gyfystyr â methiant mawr.
Tymor gwarant - Defnydd preswyl (12) mis, Defnydd masnachol (12) mis
Sut i wneud hawliad?
- Step #1 – Within 30 days of the fault discovery, please contact the original place of the SAL product purchase during standard (local) business hours, with the following information: (a) proof of purchase,e (b) description and quantity of the claimed fault, and (c) address of installation. (d) operating hours of the product.
- Step #2 – It is then the responsibility of the original place of product purchase to report the matter to SAL after-sales.;
- Cam #3 – Wedi ailview of your claim and if the product is required to be returned to SAL for technical evaluation, then at the owner’s expense,e the product must be returned to SAL as per the above-nominated locations.
- Step #4 – Pending the evaluation, the claim will be validated, resulting in the product being repaired or replaced with the same or best equivalent product at the discretion of SAL, or rejected if the product fault was found to be caused by conditions beyond the responsibility ofSAL’sL warranty obligations. Consideration of installation, product removal, return freight, and or testing feesise not the responsibility of SAL.
FAQS
Q: Can I use the PIXIE Aircon Controller with any brand of air conditioner?
A: The PIXIE Aircon Controller is designed specifically for Daikin ducted air conditioners. Ensure compatibility before use.
Q: How do I know if the controller is ready for commissioning?
A: Check the LED indicators on the PIXIE Aircon Controller. When the top indicator (Bluetooth) is white and the Stat indicator is solid blue, it is ready for commissioning.
Dogfennau / Adnoddau
 |
SAL PIXIE Aircon Controller [pdfCanllaw Defnyddiwr PIXIE Aircon Controller, PIXIE, Aircon Controller, Controller |