Cofnodwr Data Tymheredd a Lleithder Elitech RCW-360 Pro

Llwyfan Elitech iCold: newydd.i-elitech.com

DROSVIEW

Mae'r cynnyrch hwn yn fonitor Rhyngrwyd Pethau diwifr, sy'n darparu swyddogaethau fel monitro amser real, larwm, cofnodi data, uwchlwytho data, arddangosfa sgrin fawr, ac ati o dymheredd a lleithder mewn pwyntiau monitro. Ynghyd â'r platfform a'r APP “Elitech iCold”, gall wireddu swyddogaethau fel data o bell viewing, ymholiad data hanesyddol, gwthio larwm o bell, ac ati. Fe'i defnyddir yn helaeth mewn diwydiannau bwyd, meddygaeth, arlwyo, warysau rhyngwladol a logisteg.

Nodweddion

• Mae'r cynnyrch yn addas ar gyfer gwahanol achlysuron, gan gynnwys warws, storfa oergell, car oergell, cabinet cysgod, cabinet meddygaeth, labordy oergell, ac ati;
• Maint cryno, ymddangosiad ffasiynol, dyluniad hambwrdd cerdyn magnetig, gosodiad hawdd;
• Arddangosfa sgrin lliw TFT mawr, sy'n gyfoethog o ran cynnwys;
• Mae batri lithiwm aildrydanadwy adeiledig yn galluogi uwchlwytho data amser real amser hir ar ôl toriad pŵer;
• Gall dyfais larwm sain-golau adeiledig wireddu larwm lleol;
• Automatic screen-on/off;
• Supports up to 2 channels, each channel supports a variety of pluggable probe types, probe types see the selection list.

Rhyngwyneb

1. Archwiliwr allanol 1
2. Botwm ymlaen / i ffwrdd
3. Hambwrdd cerdyn magnetig
4. SIM card interface(4G Version)
5. Rhyngwyneb codi tâl
6. External Probe 1 Interface
7. Dangosydd codi tâl
8. Dangosydd statws larwm
9. Sgrin
10. Archwiliwr allanol 2
11. Botwm “Dewislen”
12. External Probe 2 Interface

Rhestr Dethol Model

Awgrymiadau: The specific host model is subject to the actual product;

Model chwiliwch: The conventional probe models are shown in the table below:

Nodyn:

1. The specific sersor type is subject to the actual product.
2. The host does not come standard with probes. Please choose probes according to actual needs, and each channel can adapt to the above types of probes.

Paramedrau Technegol

1. Power input: 5V/2A (DC), Type-C.
2. Temperature display resolution: 0.1°C.
3. Humidity display resolution: 0.1%RH.
4. Number of offline recording groups: 100,000.
5. Data storage mode: circular storage.
6. Record, upload interval and alarm interval:
   1. Normal recording interval: 1 minutes ~ 24 hours allowed, Default 5 minutes.
   2. Alarm recording interval: 1 minutes ~ 24 hours allowed, Default 2 minutes.
   3. Normal upload interval: 1 minutes ~ 24 hours allowed, Default 5 minutes.
   4. Alarm upload interval: 1 minutes ~ 24 hours allowed, Default 2 minutes.
7. Bywyd batri:
   1. Not less than 10 days (@25°C, good network environment, upload interval :5 minutes)
   2. Not less than 60 days (@25°C, good network environment, upload interval :30 minutes)
8. Indicator light: alarm indicator, charging indicator.
9. Screen: TFT color screen.
10. Buttons: power on/off, menu.
11. Alarm buzzer: alarm occurs, sounding for 1 minute.
12. Communication: 4G(can fall back to 2G),WIFI.
13. Location mode: LBS+GPS(optional).
14. Alarm modes: local alarm and cloud alarm.
15. Waterproof grade: IP64.
16. Working environment: -20~60 °C, 0~90% RH (non-condensing).
17. Specification and dimension: 110x70x23mm.

Cyfarwyddiadau Gweithredu

Installing and removing the probe
Turn off the device and securely install the sensor to the headphone connector. To remove the sensor, please turn it off first and then unplug the sensor.

Codi tâl
Connect to the power adapter via USB cable. When charging, the charging indicator flashes; when it is fully charged, the charging indicator is always on.

Pŵer ymlaen / i ffwrdd
Press and hold the on/off button for 3 seconds to turn on or off the device. Start recording data according to the recording interval after turning on, and report data according to the upload interval. Stop recording after turn off.

Data amser real

1. Networking signal icon: Connect to the base station and display a signal bar. If the device networking is abnormal, an “X” will be displayed in the upper left corner of the signal.
2. Channel identification: Represented by CH1 or CH2, indicating the probe data corresponding to channel 1 or 2 for the current data.
3. Real time temperature or humidity: Supports °C or °F display. If the platform turns off the probe, the corresponding position will display “OFF”.
4. Upper and lower alarm limits: The data below the lower limit will be displayed in blue, and the data above the upper limit will be displayed in red.
5. Number of data not uploaded: Displays the number of recorded but not uploaded data.
6. Battery icon: Four-bar battery indicator. When charging, the battery indicator flashes and remains on when fully charged. When the battery level is below 20%, it is displayed in red.
7. Time and date. When both channels are connected with probes, the CH1 and CH2 channel data automatically switches display within 10 second cycle.

Uchafswm ac Isafswm
Short press the “Menu” key to enter the “Maximum and Minimum” page, as shown in the following figure. Count the maximum and minimum values in the recorded data. CHA and CH1B represent the two collected values of channel 1 or 2, corresponding to sensor shutdown or single temperature probe. The B data displays “-~=”.

Viewing records and uploading intervals
Short press the “Menu” button to enter the “Record and Upload Interval” page, as shown in the following figure, which can be set through the APP.

View gwybodaeth dyfais
Press the “Menu” button to enter the “Device Information” page, as shown in the following figure. You can query the model, Sensor, version, GUID, IMEI, SIM card ICCID (only for Wi-Fi version)

Adding devices to the platform and basic operations
Adding decices to the platform and operation, please refer to “IV Elitech iCold”.

Elitech iCold

Mae platfform Elitech iCold Cloud yn cefnogi dau ddull ar gyfer ychwanegu a rheoli dyfeisiau: APP neu WEB cleient. Mae'r canlynol yn cyflwyno'r dull APP yn bennaf. WEB client can log in to newydd.i-elitech.com ar gyfer gweithredu.

Lawrlwythwch a Gosodwch APP
Please scan the QR code on the cover of the manual or search the Elitech iCold APP Store or Google Play to download the Elitech App.

Account registration and APP Login
Open the APP, in the login page, as shown in Figure 1, follow the prompts, enter the verification information, and click “Login”. After entering the APP, select ” New”.

PS

• If you have not an account, please click on “Register” in the login page, as shown in Figure 2, follow the prompts, and enter verification information to complete account registration.
• If you forget the password, click “Forget password” to find password as shown in Figure 3. According to the prompts to finish verification and find outthe  password.

Ychwanegu Dyfais

1. Cliciwch “” yn y gornel dde uchaf
2. Cliciwch “” in the upper right corner, scan the QR code or enter GUID back on the device, then fill in the device name and choose time zone.
3. Cliciwch “Add”, the device is added.

Awgrym: If the device shows offline after being added to the platform, first check the network icon and offline records on the device. If everything is normal, please wait for a few minutes or restart the device before turning it on. The device uploads data according to the set reporting cycle; If the device is offline for a long time, please check if the SIM card is overdue. Ultimately unable to resolve, please call the service hotline for consultation.

WIFI distribution network(WIFI version only)

1. Press the “Menu” key briefly to enter the “device Information” page.
2. Press and hold the “Menu” key, and a Bluetooth icon “Bluetooth “will appear in the upper left corner of the device
   Nodyn: Please do not exit this page during the distribution network process.
3. Use the app to distribute the network with this device via Bluetooth, as shown in the following figures 1 ~ 4.

Configure probe type

When using the device for the first time or changing the probe type, it is necessary to reconfigure the probe, as shown in Figure 4 and Figure 5 for operation;

Dull gweithredu: Log in to the APP → select the device to be changed → select “Parameter Configuration” → select “User Parameters” → select the corresponding probe model based on the actual selected probe type and channel → click “SET”.

Nodyn

1. After reconfiguring the probe type, it is necessary to wait for an upload cycle to synchronize e probe type to the device, or the device can be restarted to synchronize immediately.
2. Replace the probe. Due to the time difference between replacing the probe and configuring it, there may be faulty data in the data list.

Rheoli dyfais

Click on the device on the main page of the APP to enter the device management-related page. You can view gwybodaeth am ddyfeisiau, newid enwau dyfeisiau, view rhestrau data, gosod terfynau uchaf ac isaf larwm, cyfnodau cofnodi/uwchlwytho, ffurfweddu gwthio larwm, view mapiau, adroddiadau allforio, a gweithrediadau eraill.

Llwyfan Elitech iCold
For more functions, please log in to Elitech iCold Platform: newydd.i-elitech.com.

Atodol
Free data & advanced platform service will be activated after the device be first time registered to the Elitech platform. After the probation period, customers need to recharge the device by referring to operation manual.

Cwestiynau Cyffredin

C: Pa fathau o chwiliedyddion sy'n gydnaws â'r ddyfais hon?
A: The compatible probe types are listed in the provided selection list in the manual.

C: Sut ydw i'n cael mynediad at ddata hanesyddol gan ddefnyddio platfform Elitech iCold?
A: You can access historical data by logging into the Elitech iCold platform or using the accompanying APP for remote data viewymholiadau data ing a hanesyddol.

Dogfennau / Adnoddau

Cofnodwr Data Tymheredd a Lleithder Elitech RCW-360 Pro [pdfLlawlyfr Defnyddiwr RCW-360Pro, RCW-Pro 4G-WiFi, Cofnodwr Data Tymheredd a Lleithder RCW-360 Pro, RCW-360, Cofnodwr Data Tymheredd a Lleithder Pro, Cofnodwr Data Lleithder, Cofnodwr Data

Cyfeiriadau

• Llawlyfr Defnyddiwr