Cofnodwr Data Tymheredd Elitech LogEt 6

Cyfarwyddiadau a rhagofalon diogelwch

Cyfarwyddiadau diogelwch
Er mwyn sicrhau eich bod yn gosod ac yn defnyddio'r cynnyrch hwn yn gywir, darllenwch y telerau canlynol a chydymffurfiwch yn llym â nhw:

Batri

• Please use original or technically compatible batteries. Do not use batteries that do not meet product specifications to prevent damage to equipment or other malfunctions.
• Do not disassemble, squeeze, hit, or heat batteries privately, and do not place batteries in fire, as this may cause battery explosions and fires

Cyflenwad pŵer allanol:

• When external power supply is required, please use the power adapter configured for this device.
• Do not use other power adapters that do not meet the external connection technical specifications, otherwise it may damage the instrument and equipment, and even cause a fire power supply.

Offer

• In flammable and explosive gas environments, please use this equipment in accordance with compliance requirements; otherwise, it may cause explosions and fires
• During the use of the device, if the device emits a burnt or other odor, the power supply should be immediately cut off and the manufacturer or supplier should be contacted in a timely manner

Sylw

• If the equipment is not used for a long time, it should be removed and stored in the packaging box in a dry and cool environment
• Users are not allowed to make any unauthorized changes to this device. Any unauthorized changes may affect the accuracy of the device and even damage it
• Peidiwch â defnyddio'r ddyfais mewn amgylcheddau llym er mwyn osgoi cylchedau byr offerynnol, llosgiadau, a chamweithrediadau eraill a achosir gan amodau tywydd anffafriol fel glaw a mellt
• When the recorder is offline (no data upload), please confirm the networking status of the device
• Defnyddiwch o fewn ystod fesur y recordydd
• Please mistakenly place the external probe directly in a liquid environment to avoid equipment damage
• Peidiwch ag effeithio'n rymus ar y recordydd hwn
• The measured values of the recorder may be affected by the following factors

Gwall tymheredd
Placed in the measurement environment for too short a stable time Close to heat sources, cold sources, or directly in a water soaked state

Gwall lleithder

• Placed in the measurement environment for too short a stable time
• Long term exposure to steam, water mist, water curtains, or condensation environments

Llygredd:

• Bod mewn amgylchedd llwchlyd neu lygredig arall

Cynnyrch Drosview ac Ymddangosiad

LogEt 6 is a disposable dry ice recorder with a built-in probe. Equipped with ultra-low temperature sensors as standard, the entire machine can directly record temperature in an environment of -85 ° C. It can export reports or automatically generate PDF files through data center software, with 16000 sets of storage, 30 days of battery life, 2 years of shelf life, and support for shadow data function before and after. Widely used in freezers, medical insulation boxes, laboratories, and other scenarios.

1. Rhyngwyneb USB
2. LED
3. Sgrin LCD
4. Stopio botwm
5. Botwm cychwyn
6. External probe interface (reserved)
7. Deiliad batri

1. max/min/avr/MTK/log quantity
2. terfyn uchaf
3. terfyn is
4. cyflwr gweithio
5. lefel batri
6. Temperature/humidity values
7. dyddiad
8. amser

Model list and specifications

Rhestr Model

Model	LogEt 6
cyfluniad	PT
probe Type	Built in ultra-low temperature (dry ice)
Main sensor parameters	synhwyrydd tymheredd
Ystod mesur tymheredd	-85 ℃ ~ 50 ℃
Cywirdeb mesur tymheredd	±0.5℃（-20℃~40℃）；±1℃（other）
Datrysiad tymheredd	0.1 ℃

Manylebau

Capasiti storio	16000
Rhyngwyneb data	USB A
Batri	LS14250 lithium battery
Oes silff	2 Flynedd
Bywyd batri	30Days（log interval5min）
Communication module/mode	Rhyngwyneb USB
Gradd amddiffyn	IP65
Product dimensions (height*length*width)	100*46*19mm
Pwysau	60g
Amgylchedd gwaith	-85˚C～50˚C
Botymau corfforol	Dechrau/Stopio
Dull larwm	LED
Adaptation software	Elitechlog

Cyfarwyddiadau gweithredu

Swyddogaethau allweddol
Start button: In normal display mode, press the start button to display the current temperature, and continue pressing to switch temperature data, date and time, number of records, maximum value, and minimum value; Press and hold for 5 seconds to start recording; Stop button: Long press for 5 seconds to stop recording;

Legend status indication

Gweithrediad meddalwedd

Lawrlwytho meddalwedd
Download and install the “Jingchuang Data Center” software www.e-elitech.com/xiazaizhongxin (China), www.elitechlog.com/software (other countries)

Darllen data

1. Connect the computer using a USB interface
2. Open the “Jingchuang Data Center” and wait for the link to complete.
3. Open the PDF file directly on my computer or open the summary/historical data of “Jingchuang Data Center” to view y data.

Nodiadau
Data can be directly read without the need for the “Jingchuang Data Center” software After the device is taken out of a low-temperature environment, it needs to be left to stand for a period of time and wait for it to return to room temperature before the LCD screen displays data

Allforio data
Click on Summary/Historical Data, select Export Data, and choose the format to export

Rhestr Ategolion

• Host * 1, instruction manual (electronic version), calibration certificate (electronic version)

Gwarant a gwasanaeth ôl-werthu

Gwarant cynnyrch: 1 flwyddyn
This product can be returned, replaced or repaired within 7 days from the date of purchase due to performance failure. The warranty period is one year from the date of purchase (based on valid purchase receipts). During the warranty period, any malfunctions caused by quality problems of the product under normal use will be repaired free of charge. The shipping cost for repairing the product shall be borne unilaterally by the sender.

If any of the following situations are met, it is not within the scope of the after-sales guarantee:

1. Damage caused by force majeure, such as earthquakes, fires, floods, typhoons, etc;
2. Damage caused by human factors, such as improper use, maintenance, and storage by consumers.
3. Damage caused by maintenance, disassembly, etc. by non-precision service personnel or authorized service providers;
4. Exceeding the warranty period and scope;
5. Natural wear and tear, consumption, and aging of products (such as shells, cables, etc.).

Cwestiynau Cyffredin

C: Beth ddylwn i ei wneud os yw'r ddyfais yn allyrru arogl anarferol?
A: Immediately disconnect the power supply and contact the manufacturer or supplier for assistance.

C: Sut ydw i'n dechrau recordio ar y ddyfais?
A: Press and hold the Start button for 5 seconds to initiate recording.

Dogfennau / Adnoddau

Cofnodwr Data Tymheredd Elitech LogEt 6 [pdfLlawlyfr Cyfarwyddiadau 01, 02, Cofnodwr Data Tymheredd LogEt 6, LogEt 6, Cofnodwr Data Tymheredd, Cofnodwr Data, Cofnodwr

Cyfeiriadau

• Llawlyfr Defnyddiwr