Effon M2 Barcode Reader User Guide

Effon M2 Barcode Reader

Manylebau

Gosod a Defnyddio

1. Pwer ar: Press either side button to turn on the device.
2. Pŵer i ffwrdd: By default it shuts down after 5 minutes of sleep. To change shutdown behavior, scan the sleep-time setup barcode (or scan the Cwsg nawr barcode).
3. Initialize/reset: Sganiwch y Cychwyn Gosodiadau barcode to reset to initial settings.
4. Update version display: Sganiwch y Arddangos gwybodaeth fersiwn barcode to show version details.
5. Set output customization (optional): Use the relevant setup barcodes for prefix/suffix, end character, HID character case, and hide front/rear characters.
6. Configure Bluetooth (optional): After connecting Bluetooth, scan Newid Enw Bluetooth, then scan the desired Bluetooth name barcode; after canceling Bluetooth pairing, search again. To switch modes, scan the required Bluetooth mode barcode.
7. Mounting (optional): Adhere the metal plate to your phone/case, align the M2 slots to the plate, and slide upward until it clicks; to remove, hold the sliding button and slide the scanner downward.

Trowch ymlaen a Diffodd

Troi Ymlaen:
Press either side button to turn on the device.

Diffodd:
By default, it will shut down after 5minutesofsleep.You can scan the setting code to turn off, or set the required sleep time.

Initialization settings &Versioninformation
To reset the scanner to its initial settings, scanthe“InitializeSettings” barcode below. Scanning the “DisplayVersionInformation” barcode will show the scanner’s versiondetails.

Prefix and suffix setting
Scan the “Prefix setting” or “Suffix setting” barcode, then scan the ADCII code of the desired prefix or suffix character.

Gosod cyflymder trosglwyddo

Gosodiad amser cysgu

Storage mode setting

Set to hide front or rear characters
Scan the “Hide front character” or “Hide rear character” setup code first, then scan the barcode with the desired number of characters.

HID output character casesetting

Gosodiad iaith bysellfwrdd HID

Newid enw Bluetooth

• Step1: After connecting Bluetooth, scan the “Change Bluetooth Name” barcode.
• Step2: Scan the barcode for the Bluetooth name you wish to set, such as “Scanner123”. Finally, after canceling the Bluetooth pairing, perform a new Search to find the new Bluetooth name

Gosodiad modd Bluetooth
After scanning the required Bluetooth mode barcode, thescanner will switch to the corresponding mode.

Gosodiad nod diwedd

Cyfrol a gosodiad modur

Toggle Bluetooth HIDkeyboardiniOS

Arddangos lefel batri

Mowntio

1. Attach: Adhere the metal plate with fixing hooks to the back of your phone or phone case.
2. Align: Position the M2 scanner, aligning its slots with both ends of the metal plate.
3. Slide & Lock: Slide the M2 upward until you hear a “click,” indicating it is securely locked in place.

Dismounting

1. Unlock: Push the sliding button at the bottom of the M2 to the left and hold it in position.
2. Slide Off: While holding the button, slide the M2 downward to remove it from the plate.

Awgrym:
The metal plate on your phone allows for quick and easy Reinstallation whenever needed.

Dimensiynau 
90.3×62.4X14.O mm (LXWXH)

Pwysau:
49.5 gram

Datganiad Cyngor Sir y Fflint

Mae'r ddyfais hon yn cydymffurfio â rhan 15 o Reolau Cyngor Sir y Fflint. Mae gweithredu yn amodol ar y ddau amod canlynol:

1. efallai na fydd y ddyfais hon yn achosi ymyrraeth niweidiol, a
2. rhaid i'r ddyfais hon dderbyn unrhyw ymyrraeth a dderbynnir, gan gynnwys ymyrraeth a allai achosi gweithrediad annymunol. Gallai unrhyw newidiadau neu addasiadau na chymeradwywyd yn benodol gan y parti sy'n gyfrifol am gydymffurfio ddirymu awdurdod y defnyddiwr i weithredu'r offer.

NODYN:
Mae'r offer hwn wedi'i brofi a chanfuwyd ei fod yn cydymffurfio â'r terfynau ar gyfer dyfais ddigidol Dosbarth B, yn unol â Rhan 15 o Reolau Cyngor Sir y Fflint. Mae'r terfynau hyn wedi'u cynllunio i ddarparu amddiffyniad rhesymol rhag ymyrraeth niweidiol mewn gosodiad preswyl. Mae'r offer hwn yn cynhyrchu, yn defnyddio ac yn gallu pelydru ynni amledd radio ac, os na chaiff ei osod a'i ddefnyddio yn unol â'r cyfarwyddiadau, gall achosi ymyrraeth niweidiol i gyfathrebiadau radio. Fodd bynnag, nid oes unrhyw sicrwydd na fydd ymyrraeth yn digwydd mewn gosodiad penodol. Os yw'r offer hwn yn achosi ymyrraeth niweidiol i dderbyniad radio neu deledu, y gellir ei bennu trwy droi'r offer i ffwrdd ac ymlaen, anogir y defnyddiwr i geisio cywiro'r ymyrraeth gan un neu fwy o'r mesurau canlynol:

• Ailgyfeirio neu adleoli'r antena sy'n derbyn.
• Cynyddu'r gwahaniad rhwng yr offer a'r derbynnydd.
• Cysylltwch yr offer ag allfa ar gylched sy'n wahanol i'r un y mae'r derbynnydd wedi'i gysylltu ag ef.
• Cysylltwch â'r deliwr neu dechnegydd radio/teledu profiadol am gymorth.

Mae'r ddyfais wedi'i gwerthuso i fodloni gofyniad amlygiad RF cyffredinol. Gellir defnyddio'r ddyfais mewn cyflwr datguddiad cludadwy heb gyfyngiad.

Datrys problemau

• Scanner output not as expected (prefix/suffix, hidden characters, end character): Re-check the relevant setup codes and use the corresponding cancel procedure (e.g., scan the Prefix/Suffix setting barcode again to cancel, or scan the Canslo'r nod diwedd barcode).
• Need to restore default settings: Sganiwch y Cychwyn Gosodiadau barcode to reset the scanner to its initial settings.
• Bluetooth device name change didn’t take effect: The manual states that after initialization the Bluetooth name reverts to default. Also, after setting a new name, cancel Bluetooth pairing and perform a new search to find the updated Bluetooth name.
• Need to switch Bluetooth behavior: Scan the desired Bluetooth Mode Setting barcode; the scanner will switch to the corresponding mode.
• Power/sleep timing confusion: If the device is shutting down sooner than desired, scan the appropriate Gosod Amser Cwsg barcode (e.g., 10 minutes, 30 minutes, or Never sleep).