DAIKIN 1005-7 MicroTech Unit Controller Remote

©2025 Daikin Applied, Minneapolis, MN. All rights reserved throughout the world.This document contains the most current product information as of this printing. Daikin Applied Americas Inc. has the right to change the information, design, and construction of the product represented within the document without prior notice. For the most up-to-date product information, please go to www.DaikinApplied.com. ™® MicroTech, Rebel, Maverick II, Roofpak, Pathfinder, Trailblazer, Magnitude, Navigator, and Daikin Applied are trademarks or registered trademarks of Daikin Applied Americas Inc. The following are trademarks or registered trademarks of their respective companies: BACnet from American Society of Heating, Refrigeration and Air-Conditioning Engineers, Inc., and Windows from Microsoft Corporation.

Rhagymadrodd

• Gwybodaeth Gyffredinol
• Mae'r llawlyfr hwn yn disgrifio sut i osod a gweithredu'r rhyngwyneb defnyddiwr o bell i'w ddefnyddio gyda rheolyddion unedau oeri MicroTech Applied Rooftops a hefyd rheolwyr unedau oeri wedi'u hoeri ag aer a dŵr gan Daikin Applied.
  Am gymorth technegol ar reolyddion unedau ar y to neu rai hunangynhwysol, cysylltwch â Chanolfan Ymateb Technegol Daikin Applied Air yn 800-432-1342 (AAHTechSupport@daikinapplied.com).
• Am gymorth rheolydd uned oerydd, cysylltwch â Chanolfan Ymateb Technegol Oerydd Cymhwysol Daikin yn 800-432-1342 (CHLTechSupport@daikinapplied.com).
  For technical support on PreciseLine unit controllers, contact the Daikin Applied Air Technical Response Center at 800-432-3928 (ATSTechSupport@daikinapplied.com)

Gwybodaeth Cynnyrch

• Mae'r rhyngwyneb defnyddiwr o bell wedi'i gynllunio ar gyfer arddangos, ffurfweddu system, sefydlu a rheoli rheolwyr uned MicroTech:

• Yn ogystal â bysellbad/arddangosfa'r rheolydd sydd wedi'i osod ar yr uned, gellir cyfarparu systemau rheoli unedau MicroTech â rhyngwyneb defnyddiwr o bell sy'n trin hyd at wyth uned fesul rhyngwyneb. Mae'r rhyngwyneb defnyddiwr o bell yn darparu mynediad i ddiagnosteg unedau ac addasiadau rheoli yn debyg i'r rheolydd sydd wedi'i osod ar yr uned.

Nodweddion

• Push-and-roll navigation wheel with an 8-line by 30- character display format
• Operating conditions, system alarms, control parameters and schedules are monitored
• RS-485 or KNX interface for local or remote installation
• Power from controller, no additional power supply necessary
• Supports panel mounting and wall mounting

Negeseuon Gwybodaeth PeryglusPERYGL

• Mae perygl yn dynodi sefyllfa beryglus, a fydd yn arwain at farwolaeth neu anaf difrifol os na chaiff ei osgoi.
• RHYBUDD Mae rhybudd yn dynodi sefyllfaoedd a allai fod yn beryglus, a all arwain at ddifrod i eiddo, anaf personol neu farwolaeth os na chânt eu hosgoi.
• RHYBUDD Mae rhybudd yn dynodi sefyllfaoedd a allai fod yn beryglus, a all arwain at anaf bach neu ddifrod i offer os na chaiff ei osgoi.
• HYSBYSIAD Hysbysiad yn nodi arferion nad ydynt yn gysylltiedig ag anaf corfforol.

Dogfennau Cyfeirio

Rhif	Cwmni	Teitl	Ffynhonnell
IOM 1202	Daikin Cymhwysol	Llawlyfr Gosod, Gweithredu a Chynnal a Chadw Oerydd Pathfinder Model AWS	www.DaikinApplied.com
IOM 1206	Daikin Cymhwysol	Llawlyfr Gosod, Gweithredu a Chynnal a Chadw Oerydd Trailblazer Model AGZ
IOM 1242	Daikin Cymhwysol	Llawlyfr Gosod, Gweithredu a Chynnal a Chadw Oerydd Model AWV Pathfinder
IOMM 1033	Daikin Cymhwysol	Model Maint WME, vin BtagLlawlyfr Gosod, Gweithredu a Chynnal a Chadw Oerydd Allgyrchol Bearing Magnetig e
IOM 1264	Daikin Cymhwysol	Llawlyfr Gosod, Gweithredu a Chynnal a Chadw Oerydd Oeri Dŵr Model WWV/TWV Navigator
IOM 1243	Daikin Cymhwysol	Model Oerydd Trailblazer AMZ
OM 1382	Daikin Cymhwysol	Systemau To Pecynedig Masnachol Rebel, Llawlyfr Gweithredu a Chynnal a Chadw
OM 1373	Daikin Cymhwysol	Systemau To Rebel Applied, Llawlyfr Gweithredu a Chynnal a Chadw
OM 1357	Daikin Cymhwysol	Llawlyfr Trin Aer PreciseLine, Gweithredu a Chynnal a Chadw

Data Cydran

Cyffredinol

• Mae Ffigur 1 yn dangos manylion dyluniad caledwedd rhyngwyneb defnyddiwr o bell.

Mae'r cynllun ffisegol cyffredinol yn cynnwys:

• 5.7 × 3.8 × 1 in (144 × 96 × 26 mm) size
• 9.1 oz (256.7 g) weight, excluding packaging
• Tai plastig

Grym

• Supplied by the MicroTech unit controller for direct connection
• Separate 24V DAC power supply, optional for daisy chain connections, Max 85 mA
• NODYN: Cysylltwch naill ai â Chanolfan Ymateb Technegol Daikin Applied Air yn 800-432-1342 (AAHTechSupport@daikinapplied.com) neu'r Ganolfan Ymateb Technegol Oerydd yn 800-432-1342 (CHLTechSupport@daikinapplied.com) os dymunir cyflenwad pŵer ar wahân.

Arddangos

• LCD type FSTN
• Resolution dot-matrix 96 x 208
• Backlight blue or white, user selectable

Amodau Amgylcheddol

• Operation EC 721-3-3
• Temperature -40…158°F (-40…+70°C)
• Restriction LCD -4…140°F (-20…+60°C)
• Restriction Process-Bus -13…158°F (-25….+70°C)
• Humidity < 90% RH (no condensation)
• Air pressure Min. 10.2 psi (700 hPa), corresponding to max. 9843 ft (3000 m) above sea level

Gosodiad

• Rhag-osod
• Byddwch yn ymwybodol o'r canlynol cyn gosod y rhyngwyneb defnyddiwr o bell.

Ystyriaethau Lleoliad

• Mae lleoliad y rhyngwyneb defnyddiwr o bell yn angenrheidiol i sicrhau gweithrediad priodol. Wrth ddewis lleoliad, osgoi'r canlynol:
• Locations that are outside the operating temperature and humidity range (see Environmental Conditions.)
• Mounting on rooftop without a careful site evaluation and confirmation
• Walls that are subject to high vibration
•  Areas with high humidity exterior walls and other walls that have a temperature differential between the two sides
• Areas that are close to heat sources such as sunlight, appliances, concealed pipes, chimneys, or other heat-generating equipment.

Arwynebau Mowntio

• Ar gyfer gosod arwyneb, gosodwch y rhyngwyneb defnyddiwr o bell ar arwyneb gwastad fel plastr neu ddalen, panel rheoli, neu flwch cyffordd trydanol.
• If mounting onto sheet rock or plaster, use anchors, if necessary
• For mounting in the unit controller panel, electrical junction box, or other metal enclosure, use the supplied magnets.

Rhannau

Disgrifiad	Rhif Rhan
Rhyngwyneb Defnyddiwr o Bell MicroTech	1934080031,2
Connectors (using CE+ CE- connection option)	193410302

1. Note that part number 193408001 is no longer available.
2. For daisy-chaining unit controllers together, a 2-pin connector (PN 193410302), is required for each unit controller. The 2-pin connector is not required for direct-connecting unit controllers.
3. I ddod o hyd i'ch swyddfa rannau leol, ewch i www.DaikinApplied.com neu ffoniwch 800-37RHAN (800-377-2787).
4. Mowntio a Chysylltu
5. Mae'r adran ganlynol yn disgrifio sut i osod y rhyngwyneb defnyddiwr o bell a'i gysylltu ag un neu fwy o reolwyr uned MicroTech.
6. Electrostatic discharge hazard. Can cause equipment damage. This equipment contains sensitive electronic components that may be damaged by electrostatic discharge from your hands. Before you handle a communication module, you need to touch a grounded object, such as the metal enclosure, in order to discharge the electrostatic potential from your body.
7. WARNING Electric shock hazard. Can cause personal injury or equipment damage. This equipment must be properly grounded.

Only personnel knowledgeable in the operation of the equipment being controlled must perform connections and service to the unit controller.

1.  Remove plastic cover (Figure 2).
2. Mount the remote user interface. The remote user interface can be either panel-mounted or wall-mounted as shown in Figure 3. See Figure 4 and Figure 5 for terminal connections for each of the mounting locations.

Gwifrau'r Rhyngwyneb Defnyddiwr o Bell

1. Gellir cysylltu'r rhyngwyneb defnyddiwr o bell â rheolydd yr uned MicroTech mewn dwy ffordd wahanol:
2. 1. Cysylltiad cadwyn daisy i gymaint ag wyth uned.
3. 2. Direct connection to a single unit controller. Connection and wiring instructions in each case are described in the following section. See Table 1 for wire sizing and distance limitations.
4. NOTE: Power is supplied by the MicroTech unit controller. If a separate 24V power supply is desired, please contact either the Daikin Applied Air Technical Response Center at (800) 432- 1342 (AAHTechSupport@daikinapplied.com) or the Chiller Technical
5. Response Center at 800-432-1342 (CHLTechSupport@daikinapplied.com).

Daisy-Chain Connection Establish a physical connection from the remote user interface to the MicroTech unit controller.

1.  Connect a twisted pair wire to the CE + and CE – pins of each unit controller and remote user interface (see Figure 4 and Figure 5).
2. Daisy-chain up to eight MicroTech unit controllers to a single remote user interface. See Figure 5 for wiring details. Note the wire size and distance limitations provided in Table 1.
3. Cycle power to each MicroTech unit controller once the wiring of the remote user interface is complete.
   NOTE: Downloading and communication using the daisy chain connection may be slower than for the RJ45 (Ethernet) direct connection.

Table 1: Wiring Specifications

Cysylltiad bws	CE+, CE-, not interchangeable
Terfynell	2-screw connector
Max. hyd	1000 troedfedd (305 m)
Math cebl
Wiring distance up to 500 ft	Twisted pair, shielded cable 16 AWG
Wiring distance between 500 – 1000 ft	Twisted pair, shielded cable 14 AWG
Pellter gwifrau dros 1000 troedfedd	Not currently supported. Contact the appropriate Daikin Applied Technical Response Center for assistance.

Cysylltiad Uniongyrchol

1. Gellir cysylltu'r rhyngwyneb defnyddiwr o bell yn uniongyrchol ag un rheolydd uned MicroTech dros gysylltiad RJ45 (Ethernet) safonol.

Gweithdrefn

1. Locate the connector location as shown in Figure 6
2. Follow Figure 6 for connection details. Note the distance limitations provided.
3. Cycle power to the unit(s) once the wiring of the remote user interface is complete.
4. NODYN: Darperir y pŵer gan reolydd yr uned. Os dymunir cyflenwad pŵer 24V ar wahân, cysylltwch â Chanolfan Ymateb Technegol Daikin Applied Air yn 800-432-1342 (AAHTechSupport@daikinapplied.com) neu'r Ganolfan Ymateb Technegol Oerydd yn 800-432-1342 (CHLTechSupport@daikinapplied.com).

Gweithrediad

• Defnyddio'r Rhyngwyneb Defnyddiwr o Bell

Nodweddion Caledwedd

• Mae bysellbad/arddangosfa rhyngwyneb defnyddiwr o bell yn cynnwys arddangosfa 8 llinell wrth 30 nod, olwyn lywio “gwthio a rholio”, a thri botwm: Larwm, Dewislen, ac Yn ôl (Ffigur 7).
• Turn the navigation wheel clockwise (right) or counterclockwise (left) to navigate between lines on a screen and also to increase and decrease changeable values when editing. Press down on the wheel to use it as an Enter button.
• Press the Back button to display the previous page.
• Press the Home button to return to the main screen from the current page.
• Press the Alarm button to view y ddewislen Rhestrau Larwm.

Nodweddion Bysellfwrdd/Arddangosfa

• The first line on each page includes the page title and the line number to which the cursor is currently “pointing.” The line numbers are X/Y to indicate line number X of a total of Y lines for that page. The left most position of the title line includes an “up” arrow to indicate there are pages “above” the currently displayed items, a “down” arrow to indicate there are pages “below” the currently displayed items or an “up/down” arrow to indicate there are pages “above and below” the currently displayed page. Each line on a page can contain status-only information or include changeable data fields. When a line contains status-only information and the cursor is on that line, all but the value field of that line is highlighted meaning the text is white with a black box around it. When the line contains a changeable value and the cursor is at that line, the entire line is highlighted.
• Gellir diffinio pob llinell ar dudalen hefyd fel llinell “neidio”, sy’n golygu y bydd gwthio’r olwyn lywio yn achosi “neidio” i dudalen newydd. Dangosir saeth i’r dde eithaf o’r llinell i nodi ei bod yn llinell “neidio” ac mae’r llinell gyfan wedi’i hamlygu pan fydd y cyrchwr ar y llinell honno.
• NODYN: Dim ond bwydlenni ac eitemau sy'n berthnasol i gyfluniad penodol yr uned sy'n cael eu harddangos.

Larymau
The Alarm Details Menu includes active alarm and alarm
log information. See Figure 8 for an examplarwm gweithredol. Cyfeiriwch hefyd at Lawlyfr Gweithredu rheolydd uned MicroTech priodol (www.DaikinApplied.com) am yr opsiynau larwm sydd ar gael.

Cyfrineiriau
Mae gan swyddogaethau dewislen rheolydd uned wahanol lefelau o hygyrchedd. Y gallu i view a/neu newid gosodiadau yn dibynnu ar lefel mynediad y defnyddiwr a'r cyfrinair a gofnodwyd. Mae pedwar lefel o fynediad at gyfrinair:

1. 1. Dim cyfrinair.
   2. Lefel 2. Y lefel mynediad uchaf. Heb nodi cyfrinair, dim ond mynediad i eitemau dewislen statws sylfaenol sydd gan y defnyddiwr. Mae nodi'r cyfrinair Lefel 2 (6363) yn caniatáu mynediad tebyg i Lefel 4 gydag ychwanegu'r Ddewislen Ffurfweddu Uned.
   3. Lefel 4. Mae nodi'r cyfrinair Lefel 4 (2526) yn caniatáu mynediad tebyg i Lefel 6 gydag ychwanegu'r grwpiau Dewislen Uned Gomisiwn, Rheolaeth â Llaw, a Dewislen Gwasanaeth.
   4. Lefel 6. Mae nodi'r cyfrinair Lefel 6 (5321) yn caniatáu mynediad i'r Ddewislen Rhestrau Larwm, y Ddewislen Gyflym, a'r View/Grŵp Gosod Dewislenni Uned.
2. Alarms can be acknowledged without entering a
   cyfrinair.
   Mynediad i'r Tudalen Cyfrinair
   The main password page is displayed when the remote user
   interface display (HMI) is first accessed.
   1. Pwyswch y botwm Cartref.
   2. Press the Back button multiple times, or if the keypad/
   display has been idle longer than the Password Timeout
   (default 10 minutes).
   The main password page provides access to enter a
   password, access the Quick Menu, view the current Unit
   State, access the alarm lists or view gwybodaeth am y
   unit (Figure 9).

• Mae Llawlyfr Gweithredu rheolydd uned MicroTech (www.DaikinApplied.com) yn darparu gwybodaeth ychwanegol am gyfrineiriau, gan gynnwys sut i ddefnyddio'r gosodiadau Modd Llywio a Golygu i gael mynediad at gyfrineiriau a'u haddasu.

Cyfluniad

• The following section describes how to set up the HMI so that it can be used to display, configure, or change unit parameters.
• Refer to the applicable MicroTech unit controller Operation
• Manual for a detailed description of chiller or rooftop sequence of operation and keypad menu structure when configuring the unit via the remote user interface (www.DaikinApplied.com).
• NODYN: I newid rhwng unedau, pwyswch y botwm Yn Ôl am bum eiliad i ddychwelyd i'r brif sgrin.

Addasu Dewisiadau Defnyddiwr

1.  Turn power on to the unit controller(s). Power to the remote user interface is provided automatically from the MicroTech unit controller(s) through the RJ45 (Ethernet) direct connection.
2.  The main screen with HMI Settings and Controller List appears (Figure 10). Use the HMI Settings screen to change options for backlight color, backlight turn off time, contrast, and brightness.
3. NODYN: Gellir cael mynediad i'r brif sgrin ar unrhyw adeg drwy wasgu'r botwm Cartref am bum eiliad.
4. Press the navigation wheel to select the HMI Settings menu, if desired.

Cydamseru â Rheolydd Uned MicroTech

1. Pwyswch yr olwyn lywio i ddewis y sgrin Rhestr Rheolyddion (Ffigur 11).

• The Controller List automatically updates each time the remote user interface is powered up so that information is synchronized from the main unit controller.
• The Controller List screen displays the unit controller(s) connected to the remote user interface. This screen allows the user to select between units, if more than one unit is connected to the remote user interface

NODYN: Mae un uned yn ymddangos ar y sgrin fel posibilrwydd dewis os mai dim ond un rheolydd uned sydd wedi'i gysylltu â'r rhyngwyneb defnyddiwr o bell.

• Turn the navigation wheel clockwise and then press down to select the desired unit.
• The Information screen appears as the remote user interface performs a download sequence to import the necessary information from the main unit controller. A status bar appears on the Downloading the Objects screen to indicate that the download is in process (Figure 12).
• NODYN: Cyfeiriwch at yr adran Datrys Problemau os yw'n ymddangos bod y rhyngwyneb defnyddiwr o bell yn "rewi" yn ystod y dilyniant lawrlwytho cychwynnol.

1. Once the first unit has been downloaded, select the next unit controller, if applicable. The download process is required for each unit controller connected to the remote user interface.
2.  Press the Home button for five seconds to return to the main screen.
3. NOTE: The Downloading the Objects sequence generally takes a minute or less when direct-connecting to a single unit. However, the downloading sequence takes longer when using the daisy-chain connection. When the download sequence is complete, the
4. Main screen of the unit controller appears on the remote user interface. At this point, the remote user interface and unit controller are synchronized.
5.  Access and adjust the same parameters that are available via the unit controller keypad/display. Refer to the applicable MicroTech unit controller Operation Manual for the keypad menu structure and detailed description the unit controller sequence of operation (www.DaikinApplied.com).

Gweithdrefn Uwchraddio Firmware

1. Dilynwch y camau hyn i ddiweddaru'r cadarnwedd rhyngwyneb defnyddiwr o bell (HMI) (.bin) file.
2. NOTE: The upgrade procedure requires the use of an SD memory card no larger than 8GB with a FAT32 file fformat system.
3. NODYN: Nid yw diweddariad maes yn bosibl ar unedau gyda firmware v1.07. Cysylltwch â Chanolfan Ymateb Technegol Daikin Applied Air yn 800-432-1342 (AAHTechSupport@daikinapplied.com) or the Chiller Technical Response Center at (800) 432- 1342 (CHLTechSupport@daikinapplied.com) am gymorth.

Datrys problemau

1. Mae'r adran hon yn cynnwys gwybodaeth ddefnyddiol, cwestiynau cyffredin, ac awgrymiadau eraill sy'n gysylltiedig â'r rhyngwyneb defnyddiwr o bell.

Tabl 2: Canllaw Datrys Problemau

Problem	Ateb
During the initial download sequence, the keypad/display appears to freeze up and a “Loading….. Lost Connection” message appears.	The remote user interface is stuck in the downloading sequence due to incompatibility with v1.07 application software. The remote user interface must be updated to v10.22 or newer application software. Contact Daikin Applied Air Technical Response at 800-432-1342 am gyfarwyddiadau pellach.
The remote user interface has been connected to the MicroTech unit controller but the display remains blank after power-up.	Verify that the unit controller has power. Check wiring from the unit controller to the remote user interface. Note that inputs and outputs are polarity-sensitive.
Mae'r rhyngwyneb defnyddiwr o bell yn profi colli cyfathrebu.	The site may have “dirty power” or electrical noise causing loss of communication. See below for further instruction.

1. Access the Power Bus menu on the MicroTech unit controller by the following keypad menu path: service menu/HMI setup/PBusPwrSply=ON (default). See Figure 13.
2.  Set the default Power Bus supply.
3. For the first and last units on the daisy-chain trunk, leave the Power Bus supply at the default of ON.
4. For all other units within the daisy chain trunk, set the Power Bus supply to the OFF position.

Cynghorion Defnyddiol
Yn aml, mae technegwyr gwasanaeth yn ei chael hi'n gyfleus cael dau allweddell/arddangosfa wedi'u cysylltu ag un rheolydd uned. Mae defnyddio gosodiad sgrin hollt yn ei gwneud hi'n bosibl view multiple menu items at the same time during start-up and also for diagnostic purposes. → Simply hook up the first remote user interface with an RJ45 direct connection, and then use a two-wire twisted  pair cable to connect to the second keypad/display.

Hanes Adolygu

Adolygu	Dyddiad	Newidiadau
IM 1005	Ionawr 2010	Rhyddhad cychwynnol
IM 1005-1	Medi 2010	Added Daikin Trailblazer® chiller model AGZ-D
IM 1005-2	Mawrth 2012	Added Rebel® packaged rooftop model DPS. Updated Figure 3 with labels and connector cables.
IM 1005-3	Tachwedd 2016	Added models AWV Pathfinder® chiller and AGZ-E Trailblazer® chiller, added RJ45 direct connection option, corrected bus wiring distance limitations, Troubleshooting section, Daikin branding and formatting updates
IM 1005-4	Ionawr 2018	Ychwanegwyd modelau oeri WME a WWV.
IM 1005-5	Awst 2019	Updated connections
IM 1005-6	Mehefin 2023	Diweddariadau brandio a fformatio eraill.
IM 1005-7	Gorffennaf 2025	Updated contact information, added Daikin Trailblazer® chiller model AMZ, and removed model lists from front cover.

 

Hyfforddiant a Datblygiad Cymhwysol Daikin
Now that you have invested in modern, efficient Daikin Applied equipment, its care should be a high priority. For training information on all Daikin Applied HVAC products, please visit us at www. DaikinApplied.com and click on Training, or call 540-248-9646 a gofyn am yr Adran Hyfforddiant.

Gwarant
Gwerthir holl offer Daikin Applied yn unol â'i delerau ac amodau gwerthu safonol, gan gynnwys Gwarant Cynnyrch Cyfyngedig. Ymgynghorwch â'ch Cynrychiolydd Daikin Applied lleol am fanylion y warant. I ddod o hyd i'ch Cynrychiolydd Daikin Applied lleol, ewch i www.DaikinApplied.com.

Gwasanaethau Ôl-farchnad
I ddod o hyd i'ch swyddfa rannau leol, ewch i www.DaikinApplied.com neu ffoniwch 800-37PARTS (800-377-2787). I ddod o hyd i'ch swyddfa gwasanaeth leol, ewch i www.DaikinApplied.com neu ffoniwch 800-432-1342. Mae'r ddogfen hon yn cynnwys y wybodaeth ddiweddaraf am gynnyrch o'r argraffu hwn. I gael y wybodaeth ddiweddaraf am gynnyrch, ewch i www.DaikinApplied.com.Products manufactured in an ISO Certified Facility.

FAQS

C: Faint o unedau y gall y rhyngwyneb defnyddiwr o bell eu trin?

A: The remote user interface can handle up to eight units per interface.

Is a separate 24V power supply necessary for direct connection?

Na, darperir pŵer gan reolydd uned MicroTech.

What type of cable is recommended for daisy-chain connection?

Yn gyffredinol, mae Daikin Applied yn argymell defnyddio cebl pâr dirdro, 16 AWG wedi'i gysgodi hyd at 500 troedfedd a 14 AWG o 500 i 1000 troedfedd. Cysylltwch â'r Ganolfan Ymateb Technegol briodol ar gyfer cymwysiadau sydd angen pellteroedd hirach.

Sut ydw i'n gwybod a oes angen i mi uwchraddio'r cadarnwedd rhyngwyneb defnyddiwr o bell (HMI) neu pryd? files?

If the remote user interface seems to freeze during initial download process If wiring has been confirmed (inputs and outputs are polarity sensitive) and HMI is not responding See Firmware Upgrade Procedure section for details.

Beth os ydw i eisiau uwchraddio cadarnwedd rheolydd uned MicroTech?
Cysylltwch â Chanolfan Ymateb Technegol Daikin Applied Air yn 800-432-1342 (AAHTechSupport@daikinapplied.com) or the Chiller Technical Response Center at 800-432-1342 (CHLTechSupport@daikinapplied.com) am gymorth.

Dogfennau / Adnoddau

Rheolydd Uned MicroTech DAIKIN 1005-7 Rhyngwyneb Defnyddiwr o Bell [pdfLlawlyfr Cyfarwyddiadau 1005-7 Rheolydd Uned MicroTech Rhyngwyneb Defnyddiwr o Bell, 1005-7, Rheolydd Uned MicroTech Rhyngwyneb Defnyddiwr o Bell, Rheolydd Rhyngwyneb Defnyddiwr o Bell, Rhyngwyneb Defnyddiwr o Bell, Rhyngwyneb Defnyddiwr

Cyfeiriadau

• Llawlyfr Defnyddiwr