CYCLAMI-LOGO

Synhwyrydd Cyflymder Cadans CYCLAMI C1

CYCLAMI-C1-Cadence-Speed-Sensor-PRODUCT

Rhestr Pacio

  • Cl Sensor
  • Pad silicon
  • Rubber ring*2
  • LlawlyfrCYCLAMI-C1-Cadence-Speed-Sensor-FIG-2

Manyleb

Mathau o ddata Cadence/ Speed ( Button to switch mode )
Cludiant ANT+/ BLE 5.0
Synhwyro Geomagnetic induction
Batri CR2032 3v 230mAh
Bywyd Batri About 6~9 months
Deunydd Bike computer/ APP/ Sports watch
Dal dwr IPX6 (-10~60°C)
Maint 32K27.Sx8mm
Pwysau ≈10g

Camau Gosod

  1. The new product will be added with battery insulating film. When using this product, please open the battery cover and remove the insulating film pressed under the battery.CYCLAMI-C1-Cadence-Speed-Sensor-FIG-3
  2. White light above “C” for Cadence mode and green light above “S” for Speed mode.CYCLAMI-C1-Cadence-Speed-Sensor-FIG-4
  3. Install the sensor on the crank/hub; a small rubber ring for crank mounting, a large rubber ring for hub mounting.CYCLAMI-C1-Cadence-Speed-Sensor-FIG-5

Dyfais mewn parau

  1. Pedal mode is mounted on the inside end of the crank as shown, and speed mode is mounted on the front hub.CYCLAMI-C1-Cadence-Speed-Sensor-FIG-6
  2. Use the bike computer or turn on the Bluetooth of your phone to search for nearby sensors with the APP; during the search, you have to keep turning the cranks and tires to make the sensors enter the activation state and send pairing signals.CYCLAMI-C1-Cadence-Speed-Sensor-FIG-7
    • The APP or a bike computer generates data to indicate successful sensor pairing.
    • A sensor can only select one of the speed or pedaling modes at the same time.
    • APP: XOSSS Apple watches, Zwift, TrainingPeaks, Strava, Nike+, Etc.
    • ANT+ Devices: Magenes, Garmins, WAHOOS, Brytons, XOSS, S, IGPSPORTS, Polars, Black Bird, Etc.

Amnewid Batri

  • If the APP or bike computer does not generate data while riding and the LED indicator does not light up when the mode button is pressed, it indicates that a new battery is needed.
  • Please purchase a CR2032 coin cell battery for replacement.CYCLAMI-C1-Cadence-Speed-Sensor-FIG-8

Precautions for Use & Warranty

  • Do not immerse the sensor in water or place it in a high-temperature environment of more than 600 °C for a long time.
  • In places with serious electronic interference, such as near transformers, large construction machinery, etc., the signal may be weak.
  • Due to the different operation methods of different brands of APP or code meter software, the data may have a small deviation.
  • CYCLAMI products have 1 year after-sales warranty; more than one year only covers hardware for accessories and transportation costs in case of production problems.
  • Gallwch gysylltu â ni drwy e-bost: cyclami@cyclami.com
  • Product damage caused by human damage, misuse will not be covered by the warranty.
  • This product adopts Bluetooth wireless technology. For local use, please follow the laws and regulations of your country and region.CYCLAMI-C1-Cadence-Speed-Sensor-FIG-1

Dogfennau / Adnoddau

Synhwyrydd Cyflymder Cadans CYCLAMI C1 [pdfLlawlyfr Cyfarwyddiadau
C1, C1 Synhwyrydd Cyflymder Cadans, Synhwyrydd Cyflymder Cadans, Synhwyrydd Cyflymder, Synhwyrydd

Cyfeiriadau

Gadael sylw

Ni fydd eich cyfeiriad e-bost yn cael ei gyhoeddi. Mae meysydd gofynnol wedi'u marcio *