AudioThing 910-42 Echo Cube Effect Plugin User Guide

AudioThing 910-42 Echo Cube Effect Plugin User Guide

Echo Cube

Dual Acoustic Delay Line

Echo Cube is a dual delay plugin inspired by the Cooper Time Cube, a rare analog delay system that achieved echo without tape or electronic delay circuits scush as BBDs. The original unit created delay by sending audio through long coiled tubes, where time was defined by the physical propagation of sound through air.

Echo Cube recreates and expand this concept with two independent delay lines, A and B, each offering dedicated time, feedback, and level controls. Three models are available: Time Cube faithfully recreates the original hardware, while Hose Gardd a rhychiog are experimental, DIY inspired variations designed for sound design, expanding on the physical principles of the original unit.

The delay lines can be combined using multiple routing modes, including serial, parallel, ping pong, mono sum, and mid side, allowing precise control over delay interaction and stereo image shaping.

Echo Cube is available for macOS, Windows, and Linux (VST, VST3, AU, AAX, CLAP).

It’s also available on the App Store for iOS and iPadOS (AUv3 and Standalone).

Gosodiad

macOS

• Cliciwch ddwywaith ar archif DMG i'w echdynnu
• De-gliciwch ar y gosodwr PKG a chliciwch ar agor
• Dilynwch y cyfarwyddiadau i osod yr ategyn(s)

Ffenestri

• Echdynnu'r archif ZIP
• Cliciwch ddwywaith ar y gosodiad file (.exe)
• Dilynwch y cyfarwyddiadau i osod yr ategyn(s)

Linux

• Extract the tarball archive
• Run ./install.sh
• Dilynwch y cyfarwyddiadau i osod yr ategyn(s)

Cofrestru

When you open the plugin for the first time, the activation window will appear automatically. If it does not appear, open it by clicking the ☰ icon next to the bypass button in the top right corner of the plugin.

Ar-lein

• Os nad ydych wedi creu cyfrif eto, gallwch sign up here
• Enter your email and password and click Log In.

All-lein

• Dadlwythwch y drwydded file oddi wrth eich cyfrif.
• Drag and drop the license file into the registration window, or click the offline license file label below Log In to select the license file.

Paramedrau

Meistr

Mewnbwn: Sets the input gain before processing. Use it to optimize the signal level into the delays.
Cymysgedd: Blends the processed signal with the dry input signal.
Allbwn: Controls the final output level after processing. Useful for gain matching.

Model: Selects one of three physical delay models available:
● Time Cube, the original Time Cube design.
● Garden Hose, long flexible tubing similar to the Time Cube.
● Corrugated, corrugated plastic piping for cabling.
Highpass Applies a highpass filter to the input signal before the delays.
Gyrrwch Adds soft saturation to the input signal.

Delays (A/B)
Ffordd osgoi Enables or disables the delay channel.
Amser Sets the delay time for the line.
↳ Sync Synchronizes the delay time to the host tempo.
Adborth Controls how much of the delayed signal is fed back into the delay line.
Higher values produce longer repeats and self oscillation.
Cyfrol Sets the output level of the delay line before routing.

Ychwanegol (character controls)

Crib Adjusts the internal resonance of the delay line. This emphasizes or smooths harmonic buildup, simulating the classic comb filtering happening in the unit.

Swn Adds background noise into the delay path. This recreates the instability and texture of physical delay systems.
↳ Env When the enabled, the noise follows the input signal: it only activates when audio is present.
Phase Inverts the polarity of the delay line output. This affects how the two delay lines interact, especially in parallel, mid/side, and feedback heavy setups.

Llwybro

Llif Arwyddion
Shows the current signal flow between delay lines A and B and the stereo channels. Five modes are available:

• Serial, chains lines A and B together to create longer delay times and more complex repeats.
• Parallel, lines A and B process the input signal independently. Their outputs are mixed together at the end.
• Ping Pong, Routes the left channel into delay line A and the right channel into delay line B, then cross feeds the outputs back to the opposite channels.
• Mono Sum, the input signal is summed to mono before entering the delay lines, then processed through the serial routing path.
• Mid/Side, splits the input into mid and side components, processes them separately through delay lines A and B, then converts the signal back to stereo.

Send When disabled, no new signal enters the delay lines, but existing feedback continues to be heard until it naturally decays.
Direct Controls whether the dry signal is passed directly to the output. Useful for creating wet only delay effects. Independent of the Mix parameter.
Clip Meddal Enables a soft clipping stage on the delay output. This limits peaks in a smooth way and helps keep feedback under control at extreme settings.

Nodweddion

Clo Paramedr

Os ydych chi am gadw gwerth un neu fwy o baramedrau wrth newid rhagosodiadau, neu wrth ddefnyddio'r botwm randomizer, gallwch ddefnyddio'r nodwedd Parameter Lock.
De-gliciwch ar baramedr a dewis Parameter Lock.

Edit Value

You can also manually change the value for knobs and sliders. Right click on a parameter and choose Edit Value. You can also access this feature with SHIFT + Click.

By clicking on the icon ☰ you can access additional features.

Maint Ffenestr

Gallwch newid maint ffenestr yr ategyn gan ddefnyddio tri maint wedi'u diffinio ymlaen llaw (bach, safonol, mawr). Gallwch hefyd newid maint ffenestr yr ategyn trwy glicio a llusgo cornel dde isaf y rhyngwyneb. Bydd clicio ddwywaith yn ailosod i'r maint safonol.

Preset Copy / Paste

Gallwch chi rannu rhagosodiadau yn hawdd trwy ddefnyddio'r nodwedd Copïo / Gludo hon.
Copy to Clipboard: The status of all parameters will be saved to the Clipboard
Paste from Clipboard: Load a preset from the Clipboard

Enable / Disable Notifications

Gallwch chi alluogi neu analluogi'r hysbysiadau ar gyfer diweddariadau a newyddion (a ddangosir gan eicon y gloch). Mae'r opsiwn hwn yn fyd-eang a bydd yn effeithio ar bob AudioThing plugins.

Swap Mouse Buttons

If you are using the right button as your primary mouse button, the plugin might not recognize it. Use this option to enable it internally in the plugin.
This option is global and it will affect all AudioThing plugins.

GUI Acceleration

You can enable or disable the GUI acceleration supported by your system.
The current and default library is OpenGL.

Graphics Controls

This feature allows you to modify the User Interface’s Brightness and Contrast.

Diwedd

Where is everything?

Bydd y gosodwr yn gosod y plugins, rhagosodiadau, a data arall yn y ffolderi hyn.

macOS
AU: /Llyfrgell/Sain/Ategion/Cydrannau/
VST: /Llyfrgell/Sain/Ategion/VST/
VST3: /Llyfrgell/Sain/Plygiau/VST3/
CLAP: /Library/Audio/Plug-ins/CLAP/
AAX: /Llyfrgell/Cymorth Cais/Avid/Sain/Plug-Ins/
Data: /Defnyddwyr/Rhannu/AudioThing/

Ffenestri
VST: custom path from the installer
VST3: \Rhaglen Files\Cyffredin Files\VST3\
CLAP: \Rhaglen Files\Cyffredin Files\CLAP\
AAX: \Rhaglen Files\Cyffredin Files\Avid\Sain\Plug-Ins\
Data: \Users\Public\Public Documents\AudioThing\

Credydau
DSP & Code Carlo Castellano
dylunion John Gordon
QA Dafydd

EULA
Ymwelwch www.audiothing.net/eula/ i ailview this product’s EULA.

Diolch
Diolch am eich pryniant! Gobeithiwn y byddwch yn cael cymaint o hwyl yn ei ddefnyddio ag a gawsom wrth wneud y cynnyrch hwn.
Am gefnogaeth, ewch i www.audiothing.net/support/
For further help or any questions, please contact us here: www.audiothing.net/contact/

Dilynwch Ni

https://www.audiothing.net/
https://www.instagram.com/audiothing/
https://bsky.app/profile/audiothing.net
https://www.youtube.com/@audiothing