CREWORKS 10L Ultrasonic Cleaner Instruction Manual

1. Cyfarwyddiadau Diogelwch Pwysig

Please read and understand all safety instructions before operating this appliance. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Always connect the unit to a grounded outlet.
• Peidiwch â throchi'r brif uned mewn dŵr neu hylifau eraill.
• Peidiwch â gweithredu'r glanhawr heb hylif yn y tanc.
• Cadwch allan o gyrraedd plant.
• Do not touch the tank or cleaning solution during operation, especially when heated.
• Unplug the unit from the power source before cleaning or servicing.
• Defnyddiwch doddiannau glanhau priodol ar gyfer yr eitemau sy'n cael eu glanhau. Osgowch hylifau fflamadwy neu gyrydol.
• Ensure the lid is closed during operation to prevent splashing.
• Do not disassemble or modify the unit. Contact qualified service personnel for repairs.

2. Cynnyrch Drosview

The CREWORKS 10L Ultrasonic Cleaner is an industrial-grade cleaning machine designed for thorough and efficient cleaning of various items using 33kHz ultrasonic waves, sweep function, and adjustable temperature control.

Nodweddion Allweddol

• Capasiti 10L: Generous tank volume for various cleaning tasks.
• 33kHz Ultrasonic Frequency: Effective for removing tough residues, grime, and grease.
• Sweep Function: Varies cavitation bubble size and intensity to reach complex shapes and blind cavities for uniform cleaning.
• Modd Degas: Removes trapped air bubbles from the cleaning solution to enhance cavitation and cleaning efficiency.
• Pŵer Addasadwy: Customizable ultrasonic power settings for delicate instruments or heavy-duty parts.
• Amserydd Addasadwy: 0-30 minute timer for precise control over cleaning cycles.
• Rheoli tymheredd: Heating range of 68-140°F (20-60°C) to optimize cleaning performance.
• 304 Adeiladu Dur Di-staen: Durable and corrosion-resistant tank and housing.
• Integrated Drain Port: For convenient and mess-free fluid drainage.

Cynnwys Pecyn

Gwiriwch fod yr holl eitemau yn bresennol ac mewn cyflwr da wrth ddadbacio.

• 1 x CREWORKS 10L Ultrasonic Cleaner Unit
• 1 x Power Cord
• 1 x Mesh Basket
• 1 x Pibell Draenio
• 1 x Llawlyfr Cyfarwyddiadau

Image: The main CREWORKS 10L Ultrasonic Cleaner unit, showing its stainless steel construction and control panel.

Delwedd: Drosoddiadview of the CREWORKS 10L Ultrasonic Cleaner, highlighting its timer control, temperature control, ultrasonic power, and heating power.

3. Gosod

1. Dadbacio: Carefully remove the ultrasonic cleaner and all accessories from the packaging. Retain packaging for future storage or transport.
2. Lleoliad: Place the unit on a stable, level, and dry surface. Ensure there is adequate ventilation around the unit. Avoid placing it near heat sources or in direct sunlight.
3. Cysylltiad Pwer: Ensure the power switch is in the "OFF" position. Connect the power cord to the unit and then to a grounded electrical outlet.
4. Llenwch y tanc: Open the lid and fill the stainless steel tank with an appropriate cleaning solution. Ensure the liquid level is between the "MIN" and "MAX" marks. Do not overfill or underfill.
5. Mewnosod Basged: If using, place the mesh basket into the tank. Place items to be cleaned into the basket, ensuring they are fully submerged but not touching the bottom of the tank.

Image: The ultrasonic cleaner with its mesh basket inserted, ready for items to be placed inside.

4. Gweithrediad

Familiarize yourself with the control panel before beginning operation.

Panel Rheoli Drosview

Delwedd: Manwl view of the control panel, showing the ultrasonic, degas, power, timer, and heater settings.

• Newid Pwer: Yn troi'r uned ON / OFF.
• Rheoli Amserydd: Adjusts the cleaning duration from 0 to 30 minutes.
• Rheoli tymheredd: Sets the desired heating temperature from 68°F to 140°F (20°C to 60°C).
• Ultrasonic Power Control: Adjusts the intensity of the ultrasonic waves.
• Degas Button: Activates the degas function to remove air from the solution.
• Sweep Button: Activates the sweep function for enhanced cleaning uniformity.

Trefn Glanhau

1. Paratoi Eitemau: Ensure items are suitable for ultrasonic cleaning. Remove any loose debris before placing them in the basket.
2. Ychwanegu Datrysiad: Fill the tank with the appropriate cleaning solution.
3. Gosod Tymheredd (Dewisol): If heating is desired, set the temperature control to the desired value. Allow time for the solution to reach the set temperature.
4. Activate Degas (Recommended): For optimal cleaning, press the Degas button for 1-2 minutes to remove dissolved gases from the fresh cleaning solution. This improves cavitation efficiency.
5. Set Timer and Power: Set the timer to the desired cleaning duration (0-30 minutes) and adjust the ultrasonic power level according to the items being cleaned. Lower power for delicate items, higher for robust items.
6. Dechrau glanhau: Close the lid and turn on the unit. The ultrasonic cleaning process will begin.
7. Monitro Cynnydd: Observe the cleaning process. For heavily soiled items, multiple cycles or a change of solution may be necessary.
8. Gorffen Glanhau: Once the timer expires or cleaning is complete, turn off the unit. Carefully remove the basket with the cleaned items.
9. Golchwch a Sychwch: Rinsiwch yr eitemau wedi'u glanhau yn drylwyr gyda dŵr glân a'u sychu'n llwyr.

Image: Diagram illustrating the full-coverage sweep technology, showing varying cavitation bubbles reaching all surfaces for uniform cleaning.

Image: Visual representation of the degassing mode for enhanced cavitation and the customizable power setting dial.

Image: Comparison photos showing items before and after cleaning with the ultrasonic cleaner, demonstrating its effectiveness on various materials.

5. cynnal

Mae cynnal a chadw priodol yn sicrhau hirhoedledd a pherfformiad gorau posibl eich glanhawr uwchsonig.

• Draenio'r Tanc: After each use, especially with dirty solutions, drain the tank using the integrated drain port. Place a suitable container under the drain valve, open the valve, and allow the liquid to flow out.
• Glanhau'r Tanc: Rinse the tank thoroughly with clean water after draining. Wipe the interior and exterior of the unit with a soft, damp lliain. Peidiwch â defnyddio glanhawyr sgraffiniol na throchi'r uned mewn dŵr.
• Lid and Basket: Clean the lid and mesh basket with soap and water, then rinse and dry completely.
• Storio: Store the unit in a cool, dry place when not in use. Ensure the tank is empty and dry.
• Arolygiad Rheolaidd: Archwiliwch y llinyn pŵer yn rheolaidd am unrhyw ddifrod. Os yw wedi'i ddifrodi, stopiwch ei ddefnyddio a chysylltwch â chymorth cwsmeriaid.

Image: Close-up of the integrated drain port, designed for easy and mess-free liquid removal from the tank.

6. Datrys Problemau

Cyfeiriwch at yr adran hon am broblemau cyffredin a'u hatebion. Os yw'r broblem yn parhau, cysylltwch â chymorth cwsmeriaid.

7. manylebau

Image: Diagram showing the external dimensions of the 10L ultrasonic cleaner and the internal dimensions of the cleaning basket.

8. Gwarant a Chefnogaeth

For warranty information, technical support, or service inquiries, please contact CREWORKS customer service. Refer to your purchase documentation for specific warranty terms.

You can visit the official CREWORKS store for more information and support: Siop CREWORKS ar Amazon