Rhagymadrodd
The COROS Bike Cadence Sensor is designed to help cyclists track their pedaling RPMs (revolutions per minute) to improve pedaling efficiency. This sensor is compatible with both outdoor and indoor rides, including most spin bikes, and pairs seamlessly with bike computers, smartwatches, or smartphones via Bluetooth connectivity.
Beth Sydd yn y Bocs
Wrth agor y pecyn, fe welwch y cydrannau canlynol:
- COROS Bike Cadence Sensor
- Mount Synhwyrydd
- Rubber Bands for mounting
- Canllaw Cychwyn Cyflym
- Gwybodaeth Diogelwch Cynnyrch

Gosod a Gosod
1. Gosod Batri
The COROS Bike Cadence Sensor uses a CR2032 coin cell battery. Ensure the battery is correctly inserted before use. The battery compartment is typically located on the back of the sensor.

2. Gosod y Synhwyrydd
The sensor is designed for easy installation on your bike's crank arm. Use the provided rubber bands to securely attach the sensor. Position the sensor on the non-drive side crank arm for optimal cadence tracking.


3. Paru â Dyfeisiau
The COROS Bike Cadence Sensor connects via Bluetooth. To pair, activate the sensor by rotating the crank arm a few times. Then, open the settings on your compatible bike computer, smartwatch, or smartphone application and search for new Bluetooth devices. Select the COROS Cadence Sensor from the list to establish a connection. The sensor is not compatible with ANT+ devices.
Cyfarwyddiadau Gweithredu
Once paired, the sensor will automatically begin tracking your pedaling RPMs when you start cycling. This data is transmitted in real-time to your connected device, allowing you to monitor and optimize your pedaling efficiency. The sensor works effectively for both outdoor rides and indoor training sessions, including use with most spin bikes.
Cynnal a chadw
Bywyd Batri ac Amnewid
The CR2032 battery in your COROS Bike Cadence Sensor is designed to last up to 12 months under typical usage conditions. When the battery level is low, your connected device may display a notification. To replace the battery, carefully open the battery compartment, remove the old battery, and insert a new CR2032 battery with the positive (+) side facing up. Ensure the compartment is sealed tightly after replacement.
Cleaning and Water Resistance
The sensor has an IP67 water rating, providing protection against dust and temporary immersion in water. This makes it suitable for all-weather protection and durability. To clean the sensor, wipe it with a damp brethyn. Osgowch ddefnyddio cemegau llym neu ddeunyddiau sgraffiniol a allai niweidio'r ddyfais.
Datrys problemau
- Synhwyrydd heb gysylltu: Ensure the sensor has a fresh battery and is properly activated by rotating the crank arm. Check that Bluetooth is enabled on your receiving device and that the sensor is within range.
- Darlleniadau Anghywir: Verify that the sensor is securely mounted on the crank arm and is not obstructed. Ensure there are no strong electromagnetic interferences nearby.
- Batri yn draenio'n gyflym: Confirm that the sensor is not left in an active state when not in use. Replace the battery if it is old or if the issue persists.
Manylebau
| Brand | COROS |
| Enw Model | COROS Bike Cadence Sensor |
| Lliw | Du |
| Math Synhwyrydd | Synhwyrydd Cadence |
| Technoleg Cysylltedd | Bluetooth (Not compatible with ANT+ devices) |
| Math Mowntio | Crank Arm Mount |
| Math Batri | CR2032 Lithium Manganese Dioxide |
| Bywyd Batri | Hyd at 12 mis |
| Graddfa Dwr | IP67 |
| Pwysau | 11g |
| Dimensiynau Eitem (LxWxH) | 3.94 x 3.94 x 3.94 modfedd |
Gwarant a Chefnogaeth
The COROS Bike Cadence Sensor comes with a 1-year manufacturer's warranty. For technical support, warranty claims, or additional product information, please visit the official COROS websafle neu cysylltwch â'u gwasanaeth cwsmeriaid yn uniongyrchol. Cadwch eich prawf prynu i ddilysu'r warant.





