1. Rhagymadrodd
This manual provides detailed instructions for the installation, operation, and maintenance of your GAMDIAS Aura GC10m V2 ARGB Micro-Tower Computer Case. Please read this manual thoroughly before beginning installation to ensure proper setup and to maximize the performance and longevity of your system components.
Figure 1: GAMDIAS Aura GC10m V2 ARGB Micro-Tower Computer Case, showcasing its panoramic design and illuminated ARGB fans.
2. Gwybodaeth Diogelwch
Dilynwch y rhagofalon diogelwch canlynol i atal difrod i'r cynnyrch neu anaf i chi'ch hun:
- Always disconnect the power supply from the wall outlet before performing any installation or maintenance.
- Trin cydrannau mewnol yn ofalus i osgoi difrod gan ryddhau electrostatig (ESD). Ystyriwch ddefnyddio strap arddwrn gwrthstatig.
- Keep the case away from water, moisture, and extreme temperatures.
- Sicrhewch awyru priodol i atal gorboethi.
- Do not attempt to open or repair the power supply unit (PSU) if it is integrated; refer to qualified service personnel.
- Keep small parts and screws out of reach of children.
3. Cynnwys Pecyn
Gwiriwch fod yr holl eitemau yn bresennol yn y pecyn:
- GAMDIAS Aura GC10m V2 ARGB Micro-Tower Computer Case
- Blwch Affeithwyr (sy'n cynnwys sgriwiau, teiau cebl, a rhannau bach eraill)
- Llawlyfr Defnyddiwr (y ddogfen hon)
- Pre-installed ARGB Fans (2 x 120mm side, 1 x 120mm rear)
4. Adnabod Cydran
Familiarize yourself with the various parts of the GAMDIAS Aura GC10m V2 case:
Ffigur 2: Blaen view of the case, highlighting the tempered glass panel.
Ffigur 3: Cefn view of the case, indicating motherboard I/O cutout, expansion slots, and rear fan mount.
Figure 4: Top I/O Panel featuring USB Type-C, USB 2.0, HD Audio, and LED switch button.
Cydrannau Allweddol:
- Paneli Gwydr Tymherus: Front and side panels for component visibility.
- Porthladdoedd I/O: Located on the top panel, includes 1x USB Type-C, 1x USB 2.0, HD Audio, and an LED switch button.
- Fan Mounts: Multiple locations for cooling fans and radiators (Top, Side, Bottom, Rear).
- Baeau Gyrru: Dedicated spaces for 3.5" HDDs and 2.5" SSDs.
- Slotiau Ehangu: For graphics cards and other PCIe devices.
5. Canllaw Gosod
Follow these steps for proper installation of your PC components:
5.1. Paratoi'r Achos
- Rhowch y cas ar arwyneb gwastad, sefydlog.
- Carefully remove the tempered glass side panel by unlatching the simple clasp mechanism.
Figure 5: Removing the tempered glass side panel using the clasp mechanism.
5.2. Gosod Motherboard
- Gosodwch y darian I/O (os nad yw wedi'i gosod ymlaen llaw ar eich mamfwrdd) yn agoriad cefn y cas.
- Align your Micro-ATX or Mini-ITX motherboard with the standoffs inside the case.
- Secure the motherboard using the appropriate screws from the accessory box.
5.3. Gosod yr Uned Cyflenwad Pŵer (PSU)
- Locate the PSU mounting area, typically at the rear bottom of the case.
- Slide the PSU into position and secure it with screws from the rear of the case.
5.4. Gosod Gyriant Storio
- For 3.5" HDDs: Install into the designated HDD cage.
- For 2.5" SSDs: Mount onto the dedicated 2.5" drive bays.
- Secure drives with screws.
5.5. Graphics Card (VGA) and Expansion Card Installation
- Tynnwch y gorchuddion slot ehangu angenrheidiol o gefn y cas.
- Mewnosodwch eich cerdyn graffeg neu gardiau ehangu eraill i mewn i'r slotiau PCIe ar eich mamfwrdd.
- Sicrhewch y cardiau gyda sgriwiau.
5.6. Gosod Ffan a Rheiddiadur
Mae'r cas yn cefnogi gwahanol gyfluniadau ffan a rheiddiadur:
- Uchaf: Up to 3 x 120mm or 2 x 140mm fans; Radiator up to 360mm or 280mm.
- Ochr: Up to 2 x 120mm or 2 x 140mm fans; Radiator up to 240mm.
- Gwaelod: Up to 3 x 120mm or 2 x 140mm fans.
- Cefn: 1 x 120mm or 1 x 140mm fan; Radiator up to 120mm.
Figure 6: Cooling support diagram for fan and radiator placement.
5.7. Rheoli Ceblau
Defnyddiwch y toriadau llwybro ceblau a'r pwyntiau clymu y tu ôl i hambwrdd y famfwrdd i drefnu ceblau. Mae hyn yn gwella llif aer ac estheteg.
6. Gweithrediad
6.1. Pweru Ymlaen
After all components are installed and cables are connected, close the side panel. Connect the power cable to the PSU and a wall outlet, then press the power button on the top I/O panel to start your system.
6.2. Rheoli Goleuadau ARGB
The pre-installed ARGB fans can be controlled via the dedicated LED switch button on the top I/O panel. Press the button to cycle through various lighting modes and colors. For advanced synchronization with other ARGB components, connect the case's ARGB header to a compatible motherboard's 5V 3-pin ARGB header and use the motherboard's software.
7. cynnal
7.1. Glanhau
- Regularly clean dust filters to maintain optimal airflow.
- Use a soft, dry cloth to wipe down exterior surfaces.
- For interior cleaning, use compressed air to remove dust from components and fan blades. Ensure the system is powered off and unplugged.
7.2. Cynnal a Chadw Fan
Periodically check fan blades for dust buildup. Clean them gently with a soft brush or compressed air. Ensure fans are securely mounted and free from obstructions.
8. Datrys Problemau
Mae'r adran hon yn mynd i'r afael â phroblemau cyffredin y gallech ddod ar eu traws:
| Mater | Achos Posibl | Ateb |
|---|---|---|
| Nid yw'r system yn pweru ymlaen | Ceblau pŵer rhydd, PSU diffygiol, cysylltiadau panel blaen anghywir. | Check all power connections (PSU to wall, PSU to motherboard/components). Verify front panel header connections to the motherboard. Test PSU if possible. |
| ARGB fans not lighting up | ARGB cables disconnected, incorrect ARGB header connection, faulty fan/controller. | Ensure ARGB cables are securely connected to the controller or motherboard's 5V 3-pin ARGB header. Use the LED switch button. Check motherboard software. |
| Poor airflow/high temperatures | Cronni llwch, cyfeiriad anghywir y ffan, digon o ffaniau. | Clean dust filters and fans. Ensure fans are oriented correctly (intake/exhaust). Consider adding more fans if needed. |
| Side panel difficult to close | Cables obstructing, components not fully seated. | Re-route cables for better management. Ensure all components are fully seated and not protruding. |
9. Manylebau Technegol
Detailed specifications for the GAMDIAS Aura GC10m V2 ARGB Micro-Tower Computer Case:
Ffigur 7: Drosoddview of key technical specifications.
| Nodwedd | Manyleb |
|---|---|
| Math o Achos | Micro-Tower |
| Cefnogaeth Motherboard | Micro-ATX, Mini-ITX |
| Dimensiynau (LxWxH) | 42 x 29 x 36.5 cm |
| Pwysau Eitem | 5 kg |
| I/O Porthladdoedd | 1x USB Type-C, 1x USB 2.0, HD Audio, 1x LED Switch Button |
| Baeau Drive | 1 x 3.5" or 1 x 2.5" (HDD Cage), 3 x 2.5" |
| Fans wedi'u gosod ymlaen llaw | 2 x 120mm ARGB (Side), 1 x 120mm ARGB (Rear) |
| Fan Support (Max) | Top: 3x120mm/2x140mm, Side: 2x120mm/2x140mm, Bottom: 3x120mm/2x140mm, Rear: 1x120mm/1x140mm |
| Radiator Support (Max) | Top: 360mm/280mm, Side: 240mm, Rear: 120mm |
| Terfyn Uchder Oerach CPU | 165mm |
| VGA Length Limit | 400mm |
| Terfyn Hyd PSU | 160mm |
| Cysoni RGB | Pennawd Cyfeiriad 5-Pin 3-Pin |
10. Gwarant a Chefnogaeth
Am wybodaeth am warant a chymorth technegol, cyfeiriwch at wefan swyddogol GAMDIAS websafle neu cysylltwch â'ch manwerthwr lleol. Cadwch eich prawf prynu ar gyfer hawliadau gwarant.
Gwneuthurwr: GAMDIAS TAIWAN, No. 113, Jian 2nd Rd., Zhonghe, Dist., New Taipei City 235, Taiwan
Mewnforiwr (India): Allway Distributions Pvt Ltd, No-49, H.B. Samajha Road, Baswangudi, Bengaluru- 560004, Contact -8904307700
