seenda Bluetooth Keyboard and Mouse Combo

Rhagymadrodd

This manual provides comprehensive instructions for the seenda Bluetooth Keyboard and Mouse Combo, Model COE401. This combo offers versatile connectivity options (2.4G USB and Dual Bluetooth), multi-device switching capabilities, and a comfortable, quiet user experience. Please read this manual thoroughly before using the product to ensure proper operation and longevity.

Cynnwys Pecyn

Gwiriwch fod yr holl eitemau yn bresennol yn y pecyn:

• seenda Wireless Keyboard
• seenda Wireless Mouse
• USB 2.4G Receiver (stored inside the mouse)
• Cebl Codi Tâl USB-C
• Silicone Keyboard Cover
• Llawlyfr Defnyddiwr (y ddogfen hon)

Cyfarwyddiadau Gosod

Follow these steps to set up your seenda keyboard and mouse combo.

1. Pweru Ymlaen

• Bysellfwrdd: Locate the power switch on the top right corner of the keyboard. Slide it to the 'ON' position.
• Llygoden: Locate the power switch on the bottom of the mouse. Slide it to the 'ON' position.

2. 2.4G Wireless Connection (USB Receiver)

This method uses a USB dongle for connection and is ideal for devices without Bluetooth or for a stable, direct connection.

1. Retrieve the USB receiver from the magnetic compartment on the bottom of the mouse.
2. Plygiwch y derbynnydd USB i mewn i borthladd USB sydd ar gael ar eich cyfrifiadur neu ddyfais.
3. Ar gyfer Bysellfwrdd: Press the '2.4G' button (often labeled '01' or '2.4G') on the keyboard. The indicator light will flash, then remain solid when connected.
4. Ar gyfer Llygoden: Press the 'Mode Switch Button' on the bottom of the mouse until the indicator light for '2.4G' (often labeled '01') is selected. The mouse should connect automatically.
5. Your keyboard and mouse should now be ready for use.

3. Cysylltiad Bluetooth (BT1 / BT2)

The combo supports two independent Bluetooth connections, allowing you to switch between two Bluetooth-enabled devices.

1. Ar gyfer Bysellfwrdd: Press and hold either the 'BT1' or 'BT2' button on the keyboard for 3-5 seconds until the corresponding indicator light flashes rapidly. This indicates pairing mode.
2. Ar gyfer Llygoden: Press the 'Mode Switch Button' on the bottom of the mouse until either 'BT1' or 'BT2' is selected. Then, press and hold the 'Mode Switch Button' for 3-5 seconds until the selected Bluetooth indicator light flashes rapidly.
3. On your device (PC, laptop, tablet, smartphone), open Bluetooth settings and search for new devices.
4. Select 'seenda Keyboard' and 'seenda Mouse' from the list of available devices to pair.
5. Once paired, the indicator light on the keyboard/mouse will stop flashing and remain solid for a few seconds before turning off.

4. Newid Rhwng Dyfeisiau

To switch between connected devices (2.4G, BT1, BT2):

• Bysellfwrdd: Press the '2.4G', 'BT1', or 'BT2' button to select the desired connection channel.
• Llygoden: Press the 'Mode Switch Button' on the bottom of the mouse to cycle through '2.4G', 'BT1', and 'BT2' channels.

Cyfarwyddiadau Gweithredu

Nodweddion Bysellfwrdd

• Scissor-Switch Keys: Mae'r bysellfwrdd yn cynnwys pro iselfile scissor-switch keys for a quiet and responsive typing experience, similar to a laptop keyboard.
• Allweddi Swyddogaeth (F1-F12): The top row of keys includes multimedia and shortcut functions. These can be accessed directly or by holding the 'Fn' key, depending on your operating system and settings.
• Screen Lock Button: A dedicated button (often F12 or a lock icon) allows for quick screen locking, enhancing security in shared environments.

Nodweddion Llygoden

• Addasiad DPI: The mouse offers 4 adjustable DPI levels (800-1200-1600-2400) for precise cursor control. Press the DPI button located behind the scroll wheel to cycle through the settings.
• Whisper-Quiet Clicks: The mouse is designed for silent operation, minimizing click noise.
• Botymau Ymlaen/Yn Ôl: Side buttons provide convenient navigation for web pori a file exploration. Note: These buttons may not function on macOS/iOS devices.

Codi Tâl a Rheoli Pŵer

Both the keyboard and mouse are equipped with built-in rechargeable batteries.

• Codi tâl: Use the provided USB-C cable to charge the devices. Connect one end to the charging port on the keyboard/mouse and the other end to a USB power source (e.g., computer USB port, USB wall adapter). A full charge typically takes approximately 2 hours.
• Dangosyddion Codi Tâl: An indicator light will illuminate during charging and change color or turn off when fully charged.
• Bywyd batri: The keyboard can provide up to 180 days of use on a single charge, while the mouse offers significant standby time.
• Modd Cysgu Deallus: To conserve power, the mouse enters sleep mode after 10 minutes of inactivity, and the keyboard after 2 hours. Press any key or click the mouse to wake them up.
• Dangosydd Batri Isel: A dedicated indicator light will alert you when the battery level is low, signaling that charging is required.

Cynnal a chadw

To ensure optimal performance and longevity of your seenda keyboard and mouse combo, follow these maintenance guidelines:

• Glanhau: Use a soft, dry, lint-free cloth to clean the surfaces of the keyboard and mouse. For stubborn dirt, slightly dampgolchwch y brethyn gyda dŵr neu doddiant glanhau ysgafn. Osgowch gemegau llym neu ddeunyddiau sgraffiniol.
• Gorchudd silicon: The included silicone keyboard cover can be washed with mild soap and water, then air-dried, to keep your keyboard protected from dust and spills.
• Storio: When not in use for extended periods, store the devices in a cool, dry place. Ensure they are powered off to conserve battery life.
• Osgoi hylifau: Do not expose the devices to excessive moisture or immerse them in water.

Datrys problemau

If you encounter issues with your seenda keyboard and mouse combo, refer to the following common solutions:

• Devices not connecting:
  • Gwnewch yn siŵr bod y bysellfwrdd a'r llygoden wedi'u troi ymlaen.
  • Verify that the correct connection mode (2.4G, BT1, or BT2) is selected on both devices.
  • For 2.4G, ensure the USB receiver is securely plugged into your device.
  • For Bluetooth, ensure your device's Bluetooth is enabled and the devices are in pairing mode (rapidly flashing indicator light). Try re-pairing if necessary.
  • Move the devices closer to your computer to rule out range issues.
• Cysylltiad oedi neu ysbeidiol:
  • Check battery levels and recharge if low.
  • Ensure there are no strong wireless interference sources nearby (e.g., Wi-Fi routers, other wireless devices).
  • For 2.4G, try plugging the USB receiver into a different USB port.
• Keys not responding or mouse not moving:
  • Recharge the devices.
  • Ailgychwynwch eich cyfrifiadur neu ddyfais.
  • If using Bluetooth, try removing the device from your computer's Bluetooth list and re-pairing.
• Mouse forward/backward buttons not working on macOS/iOS:
  • This is a known compatibility limitation. These buttons are generally not supported on macOS or iOS.

Manylebau

Cydweddoldeb

The seenda Bluetooth Keyboard and Mouse Combo is designed for wide compatibility:

• Systemau Gweithredu: Windows XP/Vista/7/8/10+, Mac OS 10.12+, iPad OS/iOS 13.0+, Android 4.3 or above.
• Dyfeisiau Cydnaws: PCs, Laptops, Desktops, Notebooks, Tablets, MacBook Pro, MacBook Air, iPad, iPhone.

Gwarant a Chefnogaeth

seenda products are typically backed by a manufacturer's warranty. For the COE401 model, a 2-year warranty is generally provided, covering defects in materials and workmanship under normal use.

For warranty claims, technical support, or further assistance, please visit the official seenda websafle neu cysylltwch â'u gwasanaeth cwsmeriaid yn uniongyrchol. Cadwch eich derbynneb prynu fel prawf o brynu at ddibenion gwarant.

Am ragor o wybodaeth, ewch i: seenda Official Store