Rhagymadrodd
This manual provides comprehensive instructions for the setup, operation, and maintenance of your Behringer P24 Personal Monitor. Designed for live performances, the P24 allows musicians to create their own custom monitor mix with ease, ensuring optimal sound clarity on stage. Please read this manual thoroughly before using the device to ensure proper functionality and safety.
Cyfarwyddiadau Diogelwch Pwysig
Always follow these basic safety precautions when using the P24 Personal Monitor:
- Peidiwch ag agor y ddyfais casing. Nid oes unrhyw rannau y gall y defnyddiwr eu gwasanaethu y tu mewn.
- Peidiwch ag amlygu'r uned i law na lleithder i atal tân neu sioc drydanol.
- Sicrhewch awyru priodol. Peidiwch â rhwystro agoriadau awyru.
- Use only the power adapter specified by the manufacturer.
- Osgowch osod yr uned ger ffynonellau gwres fel rheiddiaduron, cofrestri gwres, stofiau, neu offer arall (gan gynnwys amplifyddion) sy'n cynhyrchu gwres.
- Amddiffynnwch y llinyn pŵer rhag cael ei gerdded ymlaen neu ei binsio, yn enwedig wrth blygiau, cynwysyddion cyfleustra, a'r pwynt lle maent yn gadael y cyfarpar.
- Tynnwch y plwg oddi ar y cyfarpar yn ystod stormydd mellt neu pan na chaiff ei ddefnyddio am gyfnodau hir o amser.
- Cyfeirio pob gwasanaeth i bersonél gwasanaeth cymwys.
Gosod
1. dadbacio
Carefully unpack your P24 Personal Monitor and inspect it for any signs of damage during transit. Retain the packaging materials for future transport or storage.
2. Cysylltiadau
The P24 connects to a compatible digital mixing console or StageConnect hub. Ensure all connections are secure before powering on the device.
- StageConnect Input: Cysylltwch yr StageConnect cable from your digital mixer or hub to the P24's StageConnect input. This connection typically provides both audio and power.
- Allbwn clustffon: Connect your in-ear monitors or headphones to the designated headphone output jack.
- AUX/MIC Input: If using an external auxiliary source or a local microphone, connect it to the AUX/MIC input.
3. Troi ymlaen yn gychwynnol
Once all connections are made, power on the connected StageConnect system. The P24 will power on automatically and display its current firmware version on the P24M screen.
Cyfarwyddiadau Gweithredu
Figure 1: Behringer P24 Personal Monitor Front Panel. Mae'r ddelwedd hon yn dangos y brig i lawr view of the Behringer P24 Personal Monitor. It features three main control sections: "TALKBACK VOLUME" on the left, "CHANNEL SETTINGS" in the center, and "OUTPUT VOLUME" on the right. Below these sections are twelve individual channel faders, numbered 1 through 12, and an additional fader for "AUX MIC". Each fader has a corresponding numbered button above it. The "TALKBACK VOLUME" section includes a "TALK" button and a rotary knob. The "CHANNEL SETTINGS" section features a small display labeled "P24M V0.2.8", a rotary knob, and "ADJUST PROCEED SETTINGS" text. The "OUTPUT VOLUME" section has a vertical LED meter indicating "LIMIT", "-3", "-6", "-9", "-12", "-18", "-30", and "SIG", along with a large rotary knob and the "behringer" logo.
1. Talkback Volume Control
Mae'r TALKBACK VOLUME section (left side of the unit) allows you to control the level of your talkback microphone. Press the ANERCHIAD button to activate the talkback function, and use the rotary knob to adjust the volume. This is useful for communicating with other musicians or the sound engineer.
2. Gosodiadau Sianel
Mae'r GOSODIADAU SIANEL section (center of the unit) features a display and a rotary knob for advanced adjustments. The display shows the unit's model and firmware version (e.g., P24M V0.2.8). Use the rotary knob and the "ADJUST PROCEED SETTINGS" functionality to navigate and modify various channel parameters, such as EQ, panning, or effects sends, depending on the capabilities of the connected StageConnect system.
3. Rheoli Cyfrol Allbwn
Mae'r CYFROL ALLBWN section (right side of the unit) controls the overall volume of your personal monitor mix. Use the large rotary knob to adjust the master output level to your headphones. The vertical LED meter provides visual feedback on the output signal level, indicating when the signal is approaching or reaching its limit (clipping).
4. Individual Channel Faders
The P24 features twelve individual channel faders, numbered 1 trwy 12, plus an additional AUX MIC fader. Each fader controls the volume of its corresponding input channel in your personal mix. Move the fader up to increase the volume and down to decrease it. The numbered buttons above each fader may provide additional functionality, such as muting or soloing the channel, depending on the system configuration.
5. Monitoring with Headphones
Connect your headphones or in-ear monitors to the headphone output. Adjust the individual channel faders and the master CYFROL ALLBWN to create a comfortable and balanced personal mix. Ensure the volume is set to a safe listening level to prevent hearing damage.
Cynnal a chadw
1. Glanhau
To clean the P24, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or waxes, as these can damage the finish and internal components. Ensure the unit is powered off and disconnected from all sources before cleaning.
2. Storio
When not in use for extended periods, store the P24 in a cool, dry place, away from direct sunlight and extreme temperatures. It is recommended to use the original packaging for storage to protect against dust and physical damage.
Datrys problemau
| Problem | Achos Posibl | Ateb |
|---|---|---|
| Dim pŵer i'r uned. | StageConnect cable not connected or faulty; power source issue. | Sicrhau bod y StageConnect cable is securely connected. Verify the power source for the StageConnect system is active. Try a different StageConnect cable if available. |
| Dim sain o'r clustffonau. | Headphones not connected; Output Volume too low; individual channel faders down; no signal from mixer. | Check headphone connection. Increase the CYFROL ALLBWN knob. Raise individual channel faders. Verify that the mixer is sending audio to the StageConnect system. |
| Sain ystumiedig. | Output Volume too high (clipping); input signal too hot from mixer. | Lleihau'r CYFROL ALLBWN. Check the LED meter for clipping and adjust accordingly. Inform the sound engineer to reduce the input signal level from the mixer. |
| Talkback microphone not working. | ANERCHIAD button not pressed; Talkback Volume too low; microphone issue. | Gwasgwch y ANERCHIAD button. Increase the TALKBACK VOLUME knob. Ensure the microphone is properly connected and functional. |
Manylebau
- Model: P24
- Rhif Model yr Eitem: 0609-AAM86-US1
- Brand: Behringer
- Dimensiynau Cynnyrch: 8"D x 12"L x 3"U (20.32 cm D x 30.48 cm L x 7.62 cm U)
- Pwysau Eitem: 3.78 pwys (1.71 kg)
- Technoleg Cysylltedd: Auxiliary, StageCyswllt
- Nifer y sianeli: 2
- Gwneuthurwr: Llwyth Cerdd
Gwybodaeth Gwarant
Behringer products are covered by a limited warranty. For detailed information regarding warranty terms, conditions, and registration, please refer to the official Behringer website or contact their customer support. Please retain your proof of purchase for warranty claims.
Cefnogaeth i Gwsmeriaid
For technical assistance, service, or further inquiries about your Behringer P24 Personal Monitor, please visit the official Behringer support page or contact their customer service department. Contact information can typically be found on the manufacturer's websafle.
