1. Rhagymadrodd
This manual provides essential instructions for the proper setup, operation, and maintenance of your Keeson CU380 JLDK.30.03.20 adjustable bed base remote control. Please read this manual thoroughly before use to ensure correct functionality and to prevent any issues.
2. Gosod a Pharu
2.1 Gosod Batri
The remote control requires 2 AAA batteries (not included). To install, slide open the battery compartment cover on the back of the remote. Insert the batteries, ensuring correct polarity (+/-). Close the battery compartment cover securely.
2.2 Remote Pairing Procedure
If your remote control is not already paired with your adjustable bed base, follow these steps:
- Cam 1: Disconnect the power cord of your adjustable bed base from the electrical outlet. Wait approximately 5 seconds, then plug it back into the outlet.
- Cam 2: Within 10 seconds of plugging in the power cord, locate the PAIR button on the back of the remote control. Press and hold this PAIR button. The button will illuminate blue and begin flashing.
- Cam 3: Continue holding the PAIR button until it stops flashing and the LED light on the control box of your bed base goes out. Release the PAIR button. The remote is now paired with the adjustable base.
- Cam 4: Test all remote functions to confirm successful pairing.
Image: Remote control pairing instructions, illustrating the steps to connect the remote to the bed base.
3. Gweithredu'r Rheolaeth Anghysbell
The remote control provides intuitive buttons for adjusting your bed base. Familiarize yourself with the button layout and their corresponding functions:
- Pen i Fyny/I Lawr: Yn addasu rhan pen y gwely.
- Troed i Fyny/I Lawr: Yn addasu rhan droed y gwely.
- Fflat: Yn dychwelyd y gwely i safle gwastad.
- Zero G: Activates the pre-programmed Zero Gravity position, designed to relieve pressure.
- Memory Presets (if available): Some remotes may have programmable memory buttons to save your favorite positions. Consult your bed base manual for specific instructions.
Delwedd: Blaen view of the Keeson CU380 JLDK.30.03.20 remote control, displaying buttons for head/foot adjustment, Zero G, and other functions.
4. cynnal
4.1 Batri Newydd
Replace batteries when the remote's response becomes sluggish or stops working. Always use new AAA batteries and dispose of old batteries responsibly.
4.2 Glanhau
To clean the remote control, gently wipe it with a soft, dry cloth. Avoid using liquid cleaners or abrasive materials, as these can damage the remote's surface or internal components.
5. Datrys Problemau
5.1 Nid yw'r Rheolydd o Bell yn Ymateb
- Gwnewch yn siŵr bod y batris wedi'u gosod yn gywir a heb fod wedi'u disbyddu. Amnewidiwch os oes angen.
- Verify the remote is properly paired with the bed base by following the pairing procedure in Section 2.2.
- Check that the bed base is plugged into a functional power outlet.
5.2 Materion Cydnawsedd
This remote control is specifically designed for Keeson CU380 JLDK.30.03.20 adjustable bed bases. It is not a universal remote. Before purchasing or attempting to use, ensure your bed base's control box model number matches CU380 JLDK.30.03.20.
Image: Visual guide emphasizing the importance of verifying the control box model number and comparing it with the old remote for compatibility.
6. manylebau
- Model: CU380 JLDK.30.03.20
- Dyfeisiau Cydnaws: Adjustable bed base (Keeson CU380 JLDK.30.03.20)
- Ffynhonnell Pwer: 2 batris AAA (heb eu cynnwys)
- Lliw: Du
- Nodwedd arbennig: Not a universal remote
7. Gwarant a Chefnogaeth
7.1 Gwybodaeth Gwarant
Specific warranty details for this remote control are not provided in the product information. Please refer to the documentation that came with your adjustable bed base or contact the original seller for warranty inquiries.
7.2 Cefnogaeth i Gwsmeriaid
If you encounter issues not covered in this manual or require further assistance, please contact the seller or manufacturer of your adjustable bed base. When contacting support, provide detailed information about your bed base, control box, and the remote control, including any serial numbers or model identifiers.
