1. Rhagymadrodd
Thank you for choosing the Onforu 4500LM Solar Lights Outdoor. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your solar-powered security lights. Please read this manual thoroughly before use and retain it for future reference.
2. Cyfarwyddiadau Diogelwch
- Sicrhewch fod y panel solar yn derbyn golau haul uniongyrchol ar gyfer codi tâl gorau posibl.
- Do not disassemble, modify, or attempt to repair the product. This may cause damage and void the warranty.
- Keep the product away from fire and high temperatures.
- Mae'r cynnyrch hwn wedi'i gynllunio i'w ddefnyddio yn yr awyr agored ac mae'n dal dŵr IP65. Fodd bynnag, osgoi ei drochi mewn dŵr.
- Cadwch allan o gyrraedd plant.
- Before installation, ensure the mounting surface is stable and can support the weight of the light.
3. Cynnwys Pecyn
Mae pob pecyn yn cynnwys yr eitemau canlynol:
- Onforu 4500LM Solar Light (x2)
- Rheoli o Bell (x2)
- Braced Mowntio (x2)
- Screws and Wall Plugs (for installation)
- Llawlyfr Defnyddiwr (x1)

Figure 3.1: Package contents showing two solar lights.
4. Cynnyrch Drosview
The Onforu Solar Light features an integrated design with a solar panel, three adjustable LED light heads, and a motion sensor.
- Panel Solar: Yn trosi golau haul yn ynni trydanol i wefru'r batri mewnol.
- LED Light Heads: Three adjustable heads providing 4500LM brightness and 270° illumination.
- Synhwyrydd Cynnig: Detects movement within a 180° angle and up to 40ft distance.
- Botwm YMLAEN/DIFFODD: Located on the back of the unit for initial power activation.

Ffigur 4.1: Cydrannau a dimensiynau'r cynnyrch.
5. Gosod a Gosod
Dilynwch y camau hyn ar gyfer gosod priodol:
- Tâl Cychwynnol: Before installation, ensure the light is turned ON via the button on the back and expose the solar panel to direct sunlight for at least 6-8 hours to allow for initial battery charging.
- Dewis Lleoliad: Choose an outdoor location where the solar panel can receive maximum direct sunlight throughout the day. The recommended installation height is 8.2-9.8 feet for optimal motion detection and light coverage.
- Gosod y Braced:
- Position the mounting bracket on the desired surface (wall, fence, pole).
- Mark the drill points through the holes on the bracket.
- Drill holes at the marked positions. Insert the wall plugs if installing on masonry or concrete.
- Secure the mounting bracket to the surface using the provided screws.
- Atodwch y Goleuni: Slide the solar light unit onto the secured mounting bracket until it clicks into place.
- Adjust Light Heads and Solar Panel: Adjust the angle of the three light heads to cover the desired area. Ensure the solar panel is angled to receive optimal sunlight.

Figure 5.1: Installation steps for the solar light.

Figure 5.2: Solar charging during the day for night operation.
6. Cyfarwyddiadau Gweithredu
The Onforu Solar Light offers three distinct lighting modes, controllable via the included remote.
6.1 Swyddogaethau Rheoli o Bell
- YMLAEN / I FFWRDD: Yn troi'r golau ymlaen neu i ffwrdd.
- MODE1 (PIR): Motion Sensor Mode. Light turns on at 100% brightness when motion is detected and turns off 20 seconds after motion ceases.
- MODE2 (PIR+DIM): Dim Light Sensor Mode. Light stays on at 3% brightness at night. When motion is detected, it brightens to 100% for 20 seconds, then returns to 3% brightness.
- MODE3 (D2D): Always On Mode. Light turns on automatically at 10% brightness at night and stays on until dawn.
- DIM (+/-): Adjusts brightness levels (30%, 60%, 100%) in Always On Mode (MODE3).

Figure 6.1: Remote control for selecting lighting modes and brightness.
6.2 Lighting Modes Visual Guide

Figure 6.2: Mode 1: Motion Sensor Mode (100% brightness on detection, off after 20s).

Figure 6.3: Mode 2: Dim Light Sensor Mode (3% dim, 100% on detection for 20s).

Figure 6.4: Mode 3: Always On Mode (10% brightness all night).
6.3 Fideo Cynnyrch Swyddogol
Fideo 6.1: Cynnyrch swyddogol drosoddview of the Onforu Solar Flood Lights Outdoor, demonstrating features and functionality.
7. manylebau
| Nodwedd | Manylyn |
|---|---|
| Model | BDTYD05 |
| Disgleirdeb | 4500 o Lumens |
| Ongl Goleuo | 270° |
| Ongl Synhwyrydd Symudiad | 180° |
| Pellter Synhwyrydd Symudiad | Hyd at 40 troedfedd |
| Gwrthiant Dŵr | IP65 dal dŵr |
| Ffynhonnell Pwer | Solar Powered |
| Dull Rheoli | Rheolaeth o Bell, Synhwyrydd Symudiad |
| Tymheredd Lliw | 6500 Kelvin (golau dydd) |
| Batri | 1 batri Ion Lithiwm (wedi'i gynnwys) |
| Deunydd | Biwtadïen Acrylonitrile Styrene |
| Dimensiynau Cynnyrch | 10"H x 4.7"L x 5.7"U |
| Pwysau Eitem | 0.76 pwys (12.2 owns) |
8. cynnal
- Glanhau: Sychwch y panel solar yn rheolaidd gyda lliain meddal, damp cloth to remove dust, dirt, or debris. A clean panel ensures efficient charging.
- Batri: The integrated Lithium Ion battery is designed for long-term use. If replacement is ever needed, consult a qualified technician.
- Amodau Amgylcheddol: While IP65 waterproof, extreme weather conditions (e.g., severe storms, prolonged heavy snow) may reduce performance or lifespan. Consider temporary removal or additional protection in such conditions.
9. Datrys Problemau
- Nid yw'r golau'n troi ymlaen yn y nos:
- Ensure the ON/OFF button on the back of the unit is pressed to the "ON" position.
- Verify the solar panel is receiving sufficient direct sunlight during the day (6-8 hours recommended). Obstructions like trees or buildings can reduce charging efficiency.
- Check if the light is installed in an area with strong ambient light (e.g., streetlights), which might prevent it from activating.
- Motion sensor is not working or is too sensitive/insensitive:
- Ensure the motion sensor is not obstructed.
- Adjust the angle of the motion sensor to optimize detection range and sensitivity.
- Confirm the light is in MODE1 or MODE2 via the remote control.
- Nid yw'r teclyn rheoli o bell yn gweithio:
- Gwnewch yn siŵr nad oes unrhyw rwystrau rhwng y teclyn rheoli o bell a'r golau.
- Gwiriwch fatri'r teclyn rheoli o bell (CR2025) a'i newid os oes angen.
10. Gwarant a Chefnogaeth
Onforu products are designed for quality and reliability. For warranty information, technical support, or any questions regarding your product, please refer to the contact information provided on the product packaging or visit the official Onforu websafle.





