1. Rhagymadrodd
The ZEBRONICS Pixie is a compact 5W portable Bluetooth speaker designed for on-the-go audio. It supports Bluetooth v5.3 connectivity, Micro SD card playback, and features a built-in microphone for call functionality. The speaker also includes a True Wireless Stereo (TWS) function for connecting two Pixie speakers for a stereo experience and a convenient carry loop for portability.
2. Cynnwys Pecyn
- ZEBRONICS Pixie Speaker - 1 unit
3. Cynnyrch Drosview
Ymgyfarwyddwch â chydrannau a rheolyddion y siaradwr.

Ffigur 3.1: Yn gyffredinol view of the ZEBRONICS Pixie speaker, highlighting its compact design, control buttons, and integrated carry loop.

Ffigur 3.2: Manwl view of the speaker's control panel, featuring the power button in the center, flanked by volume decrease (-) and volume increase (+) buttons. The microphone is also visible.

Figure 3.3: This image shows the side of the speaker, clearly indicating the Type-C charging port and the slot for a Micro SD card.
Rheolaethau a Phyrth:
- Botwm Pŵer (ⓘ): Pwyswch a daliwch i droi ymlaen/diffodd. Pwyswch yn fyr i chwarae/oedi cerddoriaeth neu ateb/dod i ben galwadau.
- Botwm Cyfrol i Lawr (-): Pwyswch yn fyr i ostwng y sain. Pwyswch yn hir am y trac blaenorol.
- Botwm Cyfaint i Fyny (+): Pwyswch yn fyr i gynyddu'r gyfrol. Pwyswch yn hir am y trac nesaf.
- Porthladd codi tâl Math-C: Am godi tâl ar y siaradwr.
- Slot Cerdyn Micro SD: Ar gyfer chwarae sain fileyn uniongyrchol o gerdyn Micro SD.
- Meicroffon: Ar gyfer galwadau di-ddwylo.
- Dangosydd LED: Indicates charging status and Bluetooth pairing status.
4. Gosod
4.1 Gwefru'r Siaradwr
Before initial use, fully charge the speaker. Use a Type-C cable to connect the speaker's charging port to a USB power source (e.g., computer USB port, USB wall adapter). The LED indicator will show charging status and turn off once fully charged. A full charge provides up to 7 hours of playback at 50% volume.

Ffigur 4.1: Drosoddview of speaker features including Type-C charging and built-in rechargeable battery.
4.2 Pŵer Ymlaen/Diffodd
- I Bweru Ymlaen: Press and hold the Power button (ⓘ) for approximately 3 seconds until you hear an audible prompt and the LED indicator lights up.
- I Bweru i ffwrdd: Press and hold the Power button (ⓘ) for approximately 3 seconds until you hear an audible prompt and the LED indicator turns off.
5. Cyfarwyddiadau Gweithredu
5.1 Pâr Bluetooth
- Ensure the speaker is powered on and the LED indicator is blinking, indicating it is in pairing mode.
- Ar eich dyfais symudol (ffôn clyfar, tabled, ac ati), galluogwch Bluetooth.
- Chwiliwch am dyfeisiau Bluetooth sydd ar gael.
- Select "ZEB-PIXIE" from the list of devices.
- Once paired, the LED indicator will stop blinking and remain solid, and you will hear a confirmation tone.
5.2 Swyddogaeth Stereo Di-wifr Gwirioneddol (TWS)
The TWS function allows you to connect two ZEBRONICS Pixie speakers together for a stereo audio experience.
- Ensure both Pixie speakers are powered off.
- Power on both speakers simultaneously.
- Double-press the Power button on one of the speakers. It will search for the other speaker.
- Once connected, you will hear a confirmation tone, and the LED indicators on both speakers will indicate a successful TWS connection.
- Now, connect your mobile device to one of the speakers via Bluetooth as described in section 5.1. Audio will play through both speakers in stereo.
5.3 Chwarae Cerdyn Micro SD
To play music directly from a Micro SD card:
- Mewnosodwch gerdyn Micro SD (hyd at 32GB) gyda sain MP3 files into the Micro SD card slot on the speaker.
- Bydd y siaradwr yn canfod y cerdyn yn awtomatig ac yn dechrau chwarae cerddoriaeth.
- Use the Volume Up (+) and Volume Down (-) buttons for track navigation (long press) and volume control (short press).
5.4 Swyddogaeth Galwadau
When connected to your smartphone via Bluetooth, the speaker can be used for hands-free calls.

Figure 5.1: The speaker positioned near a smartphone, demonstrating its integrated call function for hands-free communication.
- Ateb Galwad: Short press the Power button (ⓘ) when an incoming call rings.
- Galwad Diwedd: Short press the Power button (ⓘ) during a call.
- Gwrthod Galwad: Press and hold the Power button (ⓘ) for 2 seconds when an incoming call rings.
6. cynnal
- Clean the speaker with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Osgowch amlygu'r siaradwr i dymheredd eithafol, golau haul uniongyrchol, neu leithder uchel.
- Do not immerse the speaker in water as it is not waterproof.
- Storiwch y siaradwr mewn lle oer, sych pan nad yw'n cael ei ddefnyddio am gyfnodau hir.
- Charge the speaker regularly to maintain battery health, even if not used frequently.
7. Datrys Problemau
| Problem | Achos Posibl | Ateb |
|---|---|---|
| Nid yw'r siaradwr yn troi ymlaen. | Batri isel. | Gwefrwch y siaradwr yn llawn. |
| Dim sain. | Volume too low; device not connected; incorrect source. | Increase volume on speaker and connected device. Ensure Bluetooth is paired or Micro SD card is inserted correctly. |
| Mae paru Bluetooth yn methu. | Speaker not in pairing mode; device Bluetooth off; too far apart. | Ensure speaker is in pairing mode (blinking LED). Turn Bluetooth off/on on your device. Move speaker closer to device. |
| Ystumio sain ar gyfaint uchel. | Mae'r gyfrol wedi'i gosod yn rhy uchel. | Reduce the volume level on both the speaker and the connected device. |
| Mae cysylltiad TWS yn methu. | Incorrect TWS pairing procedure. | Ensure both speakers are powered off before initiating TWS pairing. Follow TWS steps precisely. |
8. manylebau
| Nodwedd | Manyleb |
|---|---|
| Enw Model | Pixie |
| Pŵer Allbwn | RMS 5 Watts |
| Maint Siaradwr | 3.6 cm |
| Fersiwn Bluetooth | v5.3 |
| Opsiynau Cysylltedd | Bluetooth, Micro SD |
| Bywyd Batri | Hyd at 7 awr (cyfaint o 50%) |
| Porthladd Codi Tâl | Math-C |
| Dull Rheoli | Botymau cyffwrdd |
| Pwysau Eitem | 90 gram |
| Dimensiynau Cynnyrch | 7D x 7W x 5H Centimetrau |
| Cymhareb Arwydd-i-Sŵn | 70 dB |
| rhwystriant | 3 Ohms |
| Gwlad Tarddiad | India |
9. Gwarant a Chefnogaeth
For warranty information and technical support, please refer to the official ZEBRONICS website or contact their customer service. The manufacturer is AJZ Industries Pvt. Ltd.
Additional protection plans may be available from your retailer.