PNI GreenHouse SC1800C PRO Solar Inverter User Manual

1. Drosview

1.1 Disgrifiad o'r Cynnyrch

The PNI GreenHouse SC1800C PRO Solar Inverter is a central component for small off-grid solar systems, suitable for areas with or without grid electricity. It provides a continuous output of 3000W with a pure sine wave, making it suitable for various household lighting installations and other small electronic motors, including refrigerators, pumps, tools, and charging devices for phones, laptops, and TVs.

1.2 Nodweddion Allweddol

• Maximum photovoltaic panel input power: 2000 W.
• Uchafswm mewnbwn DC cyftage from photovoltaic panels: 30 - 120 VDC (Vmp).
• Maximum solar charge current: 30 A input from panels, 60 A output to batteries.
• Solar charging efficiency: 98%.
• MPPT solar charger type.
• Allbwn wedi'i raddio cyftage: 230 V.
• Rated output power: 3000 W (under ideal conditions with proportional battery count and 100% charged batteries).
• Maximum apparent power: 6000 VA (peak, 0.5 seconds under ideal conditions).
• Allbwn cyftage waveform: Pure sine wave.
• Output signal frequency: 50, 60 Hz.
• Mewnbwn cyftage: 230 V AC.
• Grid connection for backup.
• Compatible with 24V batteries: AGM, lead-acid, gel, flooded lithium-ion.
• Minimum battery start voltage: 23 V (cold start voltaga).
• Integrated high-frequency inverter type (switching).
• Inverter efficiency: 90% ~ 93% (100% charged battery).
• Typical transfer time: 10 ms (UPS, VDE) 20 ms (APL).
• Line mode efficiency: > 95% (rated R load, fully charged battery).
• Hybrid operating modes: SBU – Solar/Battery/Utility, Solar Utility (UPS).
• AC charge voltage: 230 V.
• Maximum AC charge current: 30 A.
• Automatic switching: Solar - Batteries - Grid.
• Swyddogaeth arbed ynni.
• Multiple protections.
• Arddangosfa amlswyddogaeth.
• Dedicated menu for advanced settings.
• Monitoring with PC software (USB cable included).
• Remote monitoring from mobile/PC (with optional WiFi USB dongle).

1.3 Cynnwys Pecyn

• PNI GreenHouse SC1800C PRO Solar Inverter
• Cebl USB
• Llawlyfr Defnyddiwr
• PNI Smart Dongle-WLAN (for WiFi monitoring)

2. Gwybodaeth Diogelwch

Darllenwch yr holl gyfarwyddiadau a rhybuddion yn ofalus cyn eu gosod a'u gweithredu. Gall methu â dilyn y cyfarwyddiadau hyn arwain at sioc drydanol, tân neu anaf difrifol.

• Personél Cymwys: Rhaid i bersonél cymwys wneud y gwaith gosod a chynnal a chadw.
• Perygl Sioc Drydanol: Mae'r ddyfais hon yn gweithredu gyda chyfaint ucheltages. Do not open the casing unless specifically instructed.
• Diogelwch Batri: Batteries can produce explosive gases. Ensure proper ventilation. Do not smoke or allow sparks or flames near batteries. Wear eye protection.
• Awyru priodol: Install the inverter in a well-ventilated area to prevent overheating.
• Amodau Amgylcheddol: Avoid exposure to rain, snow, spray, or any liquids. Operate within the specified temperature range (-26 °C to 80 °C).
• Sylfaen: Sicrhewch fod y gwrthdröydd wedi'i seilio'n iawn yn unol â chodau trydanol lleol.
• Pŵer Datgysylltu: Always disconnect all power sources (solar, battery, AC grid) before performing any wiring or maintenance.

3. Cydrannau Cynnyrch

3.1 PNI GreenHouse SC1800C PRO Solar Inverter

Ffigur 3.1: Blaen view of the PNI GreenHouse SC1800C PRO Solar Inverter, showing the display and control buttons.

Ffigur 3.2: Cefn view of the PNI GreenHouse SC1800C PRO Solar Inverter, illustrating the various connection ports for solar panels, batteries, AC input, and AC output.

Figure 3.3: Close-up of the USB connection port on the inverter, used for PC monitoring.

3.2 PNI Smart Dongle-WLAN (Optional)

Figure 3.4: The PNI Smart Dongle-WLAN, an optional accessory for remote WiFi monitoring of the inverter.

Figure 3.5: The PNI Smart Dongle-WLAN connected to the inverter's dedicated port for WiFi communication.

4. Gosod a Gosod

4.1 Mowntio Wal

The inverter is designed for wall mounting. Choose a location that is dry, well-ventilated, and protected from direct sunlight and moisture. Ensure sufficient clearance around the unit for proper airflow and heat dissipation. Use appropriate mounting hardware for your wall type.

4.2 Diagram Cysylltiad System

Figure 4.1: Basic application diagram showing the connections between solar panels, utility grid, generator, inverter, battery, and home loads. Note: Generator, PV modules, WiFi module, and battery are not included with the inverter unless specified.

4.3 Gwifro Cysylltiadau

Follow the diagram above and the labels on the inverter for correct wiring. Ensure all connections are secure and properly insulated. It is highly recommended that a qualified electrician performs all wiring.

• Cysylltiad Panel Solar: Connect your solar panels to the designated PV input terminals. Observe correct polarity (positive to positive, negative to negative). The maximum DC input voltage yw 120 VDC.
• Cysylltiad Batri: Connect the 24V battery bank to the battery terminals. Ensure correct polarity. The inverter supports AGM, lead-acid, gel, and flooded lithium-ion batteries.
• AC Input (Grid/Generator): Connect the AC utility grid or a generator to the AC input terminals. This provides backup power and can charge batteries.
• AC Output (Loads): Connect your household loads to the AC output terminals.

4.4 Pŵer Cychwynnol

After all connections are made and verified:

1. Turn on the battery breaker.
2. Turn on the solar panel breaker (if applicable).
3. Turn on the AC input breaker (if connected to grid/generator).
4. Trowch switsh pŵer y gwrthdröydd ymlaen.
5. Observe the display for status indicators and initial readings.

5. Dulliau Gweithredu

The PNI GreenHouse SC1800C PRO offers intelligent energy management with several configurable operating modes:

• Solar Priority Mode (SBU): In this mode, the inverter prioritizes power consumption from solar energy. If solar power is insufficient, it will draw from batteries. The utility grid acts as a backup.
• Modd Blaenoriaeth Batri: The inverter prioritizes drawing power from the batteries. Solar energy will charge the batteries. The utility grid is used only when battery voltage drops below a set threshold.
• Utility Priority Mode (UPS): This mode prioritizes power from the utility grid. Solar energy will charge the batteries. The inverter switches to battery power only when the grid is unavailable, functioning as an Uninterruptible Power Supply (UPS).

These modes can be configured via the inverter's multifunction display and dedicated menu for advanced settings.

5.1 Monitro

The inverter supports monitoring through:

• PC Software (USB): Connect the inverter to a PC using the provided USB cable and dedicated software for detailed monitoring and analysis of parameters.
• Remote Monitoring (WiFi - Optional): With the optional PNI Smart Dongle-WLAN, you can monitor the inverter remotely via a mobile application or web rhyngwyneb.

6. cynnal

Regular maintenance ensures optimal performance and longevity of your inverter. Always disconnect all power sources before performing any maintenance.

• Glanhau: Glanhewch du allan y gwrthdröydd o bryd i'w gilydd gyda lliain sych. Gwnewch yn siŵr bod agoriadau awyru yn rhydd o lwch a malurion. Peidiwch â defnyddio glanhawyr hylif.
• Gwiriadau Cysylltiad: Annually inspect all wiring connections (solar, battery, AC input/output) for tightness and signs of corrosion. Tighten any loose connections.
• Archwiliad batri: If using lead-acid batteries, check electrolyte levels and terminal condition as per battery manufacturer guidelines.
• Gwiriad Amgylcheddol: Sicrhewch fod yr amgylchedd gosod yn aros o fewn yr ystodau tymheredd a lleithder penodedig.

7. Datrys Problemau

Mae'r adran hon yn rhoi canllawiau ar gyfer problemau cyffredin. Ar gyfer problemau cymhleth, cysylltwch â phersonél gwasanaeth cymwys.

8. manylebau

9. Gwarant a Chefnogaeth

Am wybodaeth am y warant a chymorth technegol, cyfeiriwch at y ddogfennaeth a ddarparwyd gyda'ch pryniant neu cysylltwch â'ch manwerthwr. Cadwch eich prawf prynu ar gyfer hawliadau gwarant.