GAMDIAS ATLAS M1 WH Mid Tower Gaming Computer Case Instruction Manual

1. Rhagymadrodd

Thank you for choosing the GAMDIAS ATLAS M1 WH Mid Tower Gaming Computer Case. This manual provides essential information for the proper installation, operation, and maintenance of your new PC case. Please read this manual thoroughly before beginning installation to ensure optimal performance and safety.

2. Gwybodaeth Diogelwch

• Always disconnect the power supply from the wall outlet before installing or servicing any components inside the case.
• Handle all components with care to prevent damage from static electricity. Consider using an anti-static wrist strap.
• Avoid placing the computer case in direct sunlight, near heat sources, or in areas with high humidity.
• Sicrhewch awyru digonol o amgylch y cas i atal gorboethi.
• Cadwch rannau bach a deunyddiau pecynnu i ffwrdd o blant.
• Peidiwch â cheisio addasu'r cas na'i gydrannau, gan y gallai hyn ddirymu'ch gwarant a pheri risg diogelwch.

3. Cynnwys Pecyn

Gwiriwch fod yr holl eitemau yn bresennol yn eich pecyn:

• GAMDIAS ATLAS M1 WH Mid Tower Gaming Computer Case
• 3 x 120mm ARGB PWM Fans (pre-installed)
• Blwch Affeithwyr (sgriwiau, teiau cebl, standoffs, ac ati)
• Llawlyfr Defnyddiwr (y ddogfen hon)

4. Cynnyrch Drosview

The GAMDIAS ATLAS M1 WH is a mid-tower gaming case designed for optimal performance and aesthetics. It features a panoramic tempered glass design, integrated RGB lighting, and an optimized cooling architecture.

Ffigur 4.1: Blaen view of the GAMDIAS ATLAS M1 WH case with internal components and digital display.

4.1. Arddangos Digidol

The case features an embedded monitor that displays real-time system information, including CPU, GPU, and ambient temperatures. Users can switch between display modes via the I/O port or using the ZEUS CAST software.

Figure 4.2: Close-up of the digital display showing temperature readings.

4.2. Concise I/O Design

Mae'r panel Mewnbwn/Allbwn blaen yn darparu mynediad cyfleus i borthladdoedd a rheolyddion hanfodol:

• 1 x USB 3.2 Gen 2 Type-C Port (up to 10 Gbps)
• 1 x Porthladd USB 3.0
• Fan LED Control Button
• Newid Modd Monitro
• Integrated Audio Jack

Ffigur 4.3: Manwl view of the front I/O panel.

4.3. Interior Accommodation

The ATLAS M1 WH case offers generous space for various components:

• Motherboard Compatibility: ATX, Micro-ATX, Mini-ITX
• VGA Card Length: Up to 410mm
• Air Cooler Height: Up to 160mm

Figure 4.4: Diagram illustrating interior dimensions and component clearances.

4.4. Storage Compatibility

The case supports flexible storage configurations:

• Up to 4 x 2.5" SSDs
• Alternatively, 3 x 2.5" SSDs + 1 x 3.5" HDD
• Hyd PSU: Hyd at 180mm

Ffigur 4.5: Mewnol view highlighting storage drive and power supply unit mounting areas.

4.5. Cooling Support

The ATLAS M1 WH is designed for efficient cooling with support for multiple fans and radiators:

• Up to 6 fans can be installed.
• Radiator Support: Top (up to 360mm/280mm), Side (up to 240mm), Rear (120mm).

Figure 4.6: Cooling configuration options for fans and radiators.

4.6. Built-in ARGB PWM Fans

The case comes with three pre-installed ARGB PWM fans: two 120mm reverse intake fans on the side and one 120mm fan on the rear exhaust. These fans provide excellent airflow and customizable ARGB visuals via the motherboard or the LED control button.

Ffigur 4.7: View of the pre-installed ARGB PWM fans within the case.

4.7. Functionality with Seamless Visuals

The ATLAS M1 series features perforated air vents and seamless tempered glass panels, offering both optimal airflow and stunning visual presentation of your build.

Figure 4.8: The ATLAS M1 series design, highlighting seamless tempered glass panels.

4.8. Product Features Video

5. Gosod

Follow these steps to assemble your computer system within the GAMDIAS ATLAS M1 WH case:

5.1. Paratoi'r Achos

1. Rhowch y cas ar arwyneb sefydlog, gwastad.
2. Remove the tempered glass side panel by gently pulling it open (tool-less design).
3. Tynnwch unrhyw ddeunyddiau pecynnu mewnol.

5.2. Gosod Motherboard

1. Gosodwch y darian I/O (os nad yw wedi'i gosod ymlaen llaw ar eich mamfwrdd) yn agoriad cefn y cas.
2. Align your ATX, Micro-ATX, or Mini-ITX motherboard with the standoffs inside the case. Ensure the standoffs match your motherboard's form factor.
3. Sicrhewch y famfwrdd gyda'r sgriwiau a ddarperir.

5.3. Gosod yr Uned Cyflenwad Pŵer (PSU)

1. Locate the PSU mounting area at the rear bottom of the case.
2. Slide your PSU into the designated bay.
3. Sicrhewch y PSU gyda sgriwiau o gefn y cas.

5.4. Gosod Gyriant Storio

1. For 2.5" SSDs: Mount the drives to the designated SSD trays or mounting points.
2. For 3.5" HDDs: Install the drive into the HDD cage (if applicable) or designated 3.5" mounting points.
3. Secure all drives with the appropriate screws.

5.5. Gosod y Cerdyn Graffeg (GPU)

1. Tynnwch y gorchuddion slot PCIe angenrheidiol o gefn y cas.
2. Insert your GPU into the appropriate PCIe slot on the motherboard.
3. Secure the GPU with screws or the retention clip.
4. The case supports both horizontal and vertical GPU mounting (vertical mount requires a separate riser cable, not included).

5.6. Cysylltu Ceblau

1. Connect all power cables from the PSU to the motherboard, GPU, and storage drives.
2. Connect the front panel I/O cables (USB, audio, power switch, reset switch, LED indicators) to their respective headers on the motherboard.
3. Connect the pre-installed fan cables to the motherboard fan headers or the built-in SATA-powered fan hub.
4. Utilize the cable management routes and tie-downs behind the motherboard tray to keep cables organized and improve airflow.

6. Gweithredu

6.1. Pweru Ymlaen

Once all components are installed and cables are connected, close the side panel. Connect the power cable to the PSU and a wall outlet, then press the power button on the front I/O panel.

6.2. Digital Display Control

The digital display on the front of the case shows real-time temperature data. Use the dedicated button on the I/O panel to cycle through CPU temperature, GPU temperature, and ambient temperature displays. For advanced control and customization, install the GAMDIAS ZEUS CAST software.

6.3. Rheoli Goleuadau ARGB

Gellir rheoli'r ffannau ARGB sydd wedi'u gosod ymlaen llaw mewn dwy ffordd:

• Cysoni mamfwrdd: Connect the ARGB cables to a compatible 5V 3-pin ARGB header on your motherboard and use your motherboard's RGB software for synchronization and effects.
• Case Control: Use the LED control button on the front I/O panel to cycle through various pre-set lighting effects and colors if not connected to a motherboard ARGB header.

7. cynnal

Regular maintenance helps ensure the longevity and optimal performance of your computer system.

• Glanhau Hidlo Llwch: The case includes magnetic dust filters on the top and bottom. Regularly remove and clean these filters with water and mild soap, or simply brush off accumulated dust. Ensure they are completely dry before reattaching.
• Glanhau Achos: Defnyddiwch feddal, damp cloth to wipe down the exterior of the case. For tempered glass panels, use a glass cleaner and a microfiber cloth to avoid streaks. Avoid abrasive cleaners or solvents.
• Tynnu Llwch Mewnol: Periodically use compressed air to clear dust from internal components, especially fan blades and heatsinks. Ensure the system is powered off and unplugged before performing internal cleaning.

8. Datrys Problemau

If you encounter issues with your GAMDIAS ATLAS M1 WH case, refer to the following common problems and solutions:

• Dim pŵer:
  • Gwnewch yn siŵr bod y PSU wedi'i gysylltu'n iawn â'r soced wal a bod y switsh pŵer ar y PSU yn y safle 'ON'.
  • Gwiriwch fod cebl switsh pŵer y panel blaen wedi'i gysylltu'n gywir â phennawd y famfwrdd.
• Ffanau Ddim yn Troi / RGB Ddim yn Gweithio:
  • Check if the fan power cables are securely connected to the motherboard or the fan hub.
  • Ensure the ARGB cables are connected to a compatible 5V 3-pin ARGB header on the motherboard or the case's internal controller.
  • If using motherboard software, ensure it is installed and configured correctly.
• Arddangosfa Ddigidol Ddim yn Gweithio:
  • Verify that the display's power and data cables are correctly connected to the motherboard.
  • Ensure the ZEUS CAST software is installed and running.
• Gorboethi:
  • Ensure all case fans are spinning correctly and oriented for optimal airflow (intake/exhaust).
  • Clean any dust filters and internal components to improve air circulation.
  • Verify that CPU and GPU coolers are properly installed and functioning.

For further assistance, please contact GAMDIAS customer support.

9. manylebau

10. Gwarant a Chefnogaeth

Am wybodaeth am warant a chymorth technegol, cyfeiriwch at wefan swyddogol GAMDIAS websafle neu cysylltwch â'u gwasanaeth cwsmeriaid yn uniongyrchol. Cadwch eich derbynneb prynu fel prawf o brynu ar gyfer hawliadau gwarant.

Swyddogol GAMDIAS Websafle: www.gamdias.com