1. Gwybodaeth Diogelwch
Please read and understand this entire manual before attempting to assemble, operate, or install the product. Failure to do so could lead to electric shock, fire, or other injuries that could be fatal or cause serious damage.
- RHYBUDD: Risg sioc drydanol. Datgysylltwch y pŵer wrth y ffiws neu'r torrwr cylched cyn ei osod neu ei wasanaethu.
- This fixture is intended for installation in accordance with the National Electrical Code (NEC) and local code specifications. If you are not familiar with these codes, a qualified electrician should perform the installation.
- Peidiwch â gosod y gosodiad hwn ar arwynebau sy'n hawdd eu fflamio.
- Sicrhewch fod pob cysylltiad yn ddiogel ac wedi'i inswleiddio'n iawn.
- Peidiwch ag edrych yn uniongyrchol i'r ffynhonnell golau LED.
2. Cynnwys Pecyn
Gwiriwch fod yr holl gydrannau yn bresennol cyn dechrau'r gosodiad.
- LED Flood Light Fixture (1)
- Pecyn Caledwedd Mowntio (1)
- Llawlyfr Cyfarwyddiadau (1)
3. manylebau
| Manyleb | Gwerth |
|---|---|
| Rhif Model | 17000207 |
| Ffynhonnell Pwer | Gwifrau caled |
| Wattage | 32 Wat |
| Disgleirdeb | 3200 o Lumens |
| Tymheredd Lliw | 4000 Kelvin (Gwyn golau dydd) |
| Parth Canfod Cynnig | 240 degrees, up to 50 ft (15 m) |
| Deunydd | Plastig |
| Defnydd Dan Do / Awyr Agored | Awyr Agored |
| Lefel Gwrthsefyll Dŵr | Gwrth-ddŵr |
| Dimensiynau (L x W x H) | 7" x 12" x 8.4" |
| Gwarant | Gwarant gyfyngedig gwneuthurwr 2 flwyddyn |
Image: Product dimensions for planning installation space.
4. Gosod a Gosod
This flood light is hardwired and requires connection to your home's electrical system. If you are not comfortable with electrical wiring, it is recommended to consult a qualified electrician.
4.1 Opsiynau Mowntio
The fixture offers dual mounting capabilities, allowing for installation on a wall or under an eave. The canopy can be rotated to accommodate the desired position.
Image: Wall mount and eave mount installation options.
4.2 Camau Gosod
- Trowch Pŵer i ffwrdd: Before starting, ensure the power to the installation area is turned off at the circuit breaker or fuse box.
- Install Mounting Bar: Secure the mounting bar onto the junction box.
- Gosod Plât Mowntio: Attach the mounting plate to the mounting bar.
- Cysylltiadau Gwifren: Connect the fixture's wires to your home's electrical wires according to local codes (typically black to black, white to white, and ground to ground). Use wire nuts to secure connections.
- Atodwch gêm: Secure the flood light fixture to the mounting plate using the center bolt.
- Sêl: Apply weather-resistant sealant around the mounting plate to prevent water intrusion.
- Adfer Pwer: Once installation is complete and secure, restore power to the circuit.
Image: Step-by-step installation guide.
5. Cyfarwyddiadau Gweithredu
The Globe Electric 17000207 flood light features motion activation and adjustable settings for optimal performance.
5.1 Motion Activation
The integrated motion sensor detects movement within a 240-degree zone, up to 50 feet (15 meters) away. The light will activate when motion is detected within this range.
Image: Motion detection zone illustration.
5.2 MotionBright™ 2-Level Lighting
This feature provides constant low ambient lighting when no motion is detected, and automatically switches to full brightness when motion is sensed, enhancing security and saving energy.
Image: MotionBright feature demonstrating low and full brightness modes.
5.3 Addasu Gosodiadau
The motion sensor unit has adjustable dials to customize the light's behavior:
- Ar Amser: Adjusts how long the light stays on after motion is detected (1, 5, or 20 minutes, or Test mode).
- Sens (Sensitivity): Controls the range and sensitivity of the motion sensor (Low, Med, High).
- Disgleirdeb: Adjusts the overall brightness of the light (Low, High).
- MotionBright: Selects the operating mode (OFF, Dusk to Dawn, Hour).
Image: Control dials for adjusting light settings.
5.4 Addasu Lamp Penaethiaid
Y tri LED lamp heads are independently adjustable, allowing you to direct the light precisely where needed for optimal coverage.
Image: Adjustable lamp heads for directing light.
6. cynnal
This LED flood light is designed for minimal maintenance.
- Glanhau: I lanhau'r gosodiad, gwnewch yn siŵr bod y pŵer wedi'i ddiffodd. Sychwch â lliain meddal, damp brethyn. Peidiwch â defnyddio glanhawyr neu doddyddion sgraffiniol.
- LEDs: The integrated LED lights are not user-replaceable. Do not attempt to open the lamp pennau.
- Synhwyrydd: Cadwch lens y synhwyrydd symudiad yn lân ac yn rhydd o rwystrau (e.e. baw, pry copwebs) to ensure proper operation.
7. Datrys Problemau
If you experience issues with your flood light, refer to the following common problems and solutions:
| Problem | Achos Posibl | Ateb |
|---|---|---|
| Nid yw golau yn troi ymlaen. | No power, faulty wiring, sensor blocked, incorrect settings. | Check circuit breaker. Verify wiring connections. Clear sensor lens. Adjust 'On Time' or 'Sens' settings. |
| Mae golau yn aros ymlaen yn barhaus. | Continuous motion detected, 'On Time' set too long, 'MotionBright' setting. | Ensure no constant motion in detection zone. Adjust 'On Time' to a shorter duration. Check 'MotionBright' setting (e.g., if set to 'Dusk to Dawn'). |
| Motion not detected reliably. | Sensor blocked, sensitivity too low, incorrect angle. | Clear sensor lens. Increase 'Sens' setting. Adjust sensor angle for optimal coverage. |
| Fflachiadau golau. | Loose wiring connection, power fluctuations. | Check all wiring connections for tightness. Consult an electrician if power fluctuations are suspected. |
8. Gwarant a Chefnogaeth
This Globe Electric product is backed by a Gwarant gyfyngedig gwneuthurwr 2 flwyddyn o'r dyddiad prynu. Mae'r warant hon yn cwmpasu diffygion mewn deunyddiau a chrefftwaith o dan ddefnydd arferol.
For warranty claims, technical assistance, or further inquiries, please contact Globe Electric customer support. Keep your proof of purchase for warranty validation.
Am ragor o wybodaeth, ewch i'r Globe Electric Store on Amazon.
