1. Rhagymadrodd
This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your Behringer JT-4000 MICRO Portable 4-Voice Hybrid Synthesizer. Please read this manual thoroughly to ensure proper use and to maximize the potential of your instrument.
2. Cyfarwyddiadau Diogelwch
- Cyflenwad Pŵer: Use only the specified USB Type-C power source. Ensure the voltage yn cyfateb i ofynion y ddyfais.
- Dŵr a lleithder: Do not expose the unit to rain, moisture, or any liquids. Avoid placing objects filled with liquids on the unit.
- Ffynonellau Gwres: Cadwch yr uned i ffwrdd o ffynonellau gwres fel rheiddiaduron, cofrestri gwres, stofiau, neu offer arall sy'n cynhyrchu gwres.
- Awyru: Peidiwch â rhwystro unrhyw agoriadau awyru. Sicrhewch fod digon o lif aer o amgylch yr uned.
- Glanhau: Glanhewch gyda lliain sych yn unig. Peidiwch â defnyddio glanhawyr hylif na aerosolau.
- Gwasanaethu: Peidiwch â cheisio gwasanaethu'r cynnyrch hwn eich hun. Cyfeiriwch yr holl wasanaethu at bersonél gwasanaeth cymwys.
3. Cychwyn Arni
3.1 Dadbacio
Carefully remove the JT-4000 MICRO from its packaging. Inspect the unit for any signs of damage during transit. Retain the packaging for future transport or storage.
3.2 Cysylltiad Pwer
The JT-4000 MICRO is powered via a USB Type-C port. Connect a compatible USB Type-C cable to the unit's USB port and to a power source (e.g., a power bank, computer USB port, or a USB power adapter). The unit will power on automatically once connected.
3.3 Allbwn Sain
Cysylltwch glustffonau i'r FFONAU output jack on the top panel for monitoring audio. Adjust the CYFROL knob to control the headphone output level.
3.4 Cysylltedd MIDI
The USB Type-C port also supports USB MIDI for connection to a computer or other MIDI devices. This allows the JT-4000 MICRO to send and receive MIDI data for integration with digital audio workstations (DAWs) or other MIDI-compatible hardware.
4. Controls and Interface
The Behringer JT-4000 MICRO features an intuitive layout designed for ease of use and quick sound manipulation.
Ffigur 4.1: Blaen view of the Behringer JT-4000 MICRO, showing the keyboard, knobs, buttons, and display.
4.1 Panel Uchaf Drosoddview
Ffigur 4.2: O'r brig i lawr view highlighting the control layout of the JT-4000 MICRO.
- Porth USB Math-C: For power supply and USB MIDI connectivity.
- Newid Pwer: Yn troi'r uned ymlaen/i ffwrdd.
- Knob CYFROL: Adjusts the overall output level of the headphones.
- FFONAU Jack: Allbwn stereo 3.5mm ar gyfer clustffonau.
- Botwm SEL: Selects parameters or navigates menus.
- ENTER Botwm: Yn cadarnhau dewisiadau neu'n mynd i mewn i is-ddewislenni.
- OSC-X Button: Accesses Oscillator parameters.
- LFO-X Button: Accesses Low-Frequency Oscillator parameters.
- Botwm Hidlo: Accesses Filter parameters.
- AMP botwm: Mynediadau Amplifier envelope parameters.
- Botwm ARP: Activates and configures the Arpeggiator.
- SETTINGS Button: Accesses global settings and utility functions.
- CUTOFF Knob: Yn rheoli amledd torri'r hidlydd.
- RESO Knob: Controls the filter resonance.
- Arddangos: Shows current patch number, parameter values, and menu options.
- 16 Touch-Sensitive Keyboard: For playing notes and inputting data.
5. Gweithrediad Sylfaenol
5.1 Pŵer Ymlaen/Diffodd
To power on, connect the USB Type-C cable to a power source. The unit will automatically turn on. To power off, disconnect the USB Type-C cable.
5.2 Addasu'r Sain
Cylchdroi y CYFROL knob clockwise to increase the headphone output level and counter-clockwise to decrease it.
5.3 Dewis Rhagosodiadau
The JT-4000 MICRO comes with 32 editable and savable presets. To select a preset:
- Gwasgwch y SEL button to enter preset selection mode.
- Use the keyboard keys to navigate through the presets. The display will show the current preset number.
- Gwasgwch y ENWCH button to load the selected preset.
5.4 Editing Parameters
The JT-4000 MICRO allows for extensive parameter editing. Each main function (OSC-X, LFO-X, FILTER, AMP, ARP, SETTINGS) has dedicated buttons to access its parameters.
- Press the desired function button (e.g., OSC-X). The button will illuminate.
- Defnyddiwch y SEL button to cycle through the parameters within that function.
- Defnyddiwch y CUTOFF a RESO knobs to adjust the value of the selected parameter. The display will show the parameter name and its current value.
- Press the function button again to exit parameter editing for that section.
5.5 Arbed Rhagosodiadau
After editing a preset, you can save your changes to one of the 32 available slots.
- While in a preset editing mode, press and hold the ENWCH botwm.
- The display will prompt you to select a save location. Use the keyboard keys to choose a slot.
- Gwasgwch ENWCH again to confirm saving.
6. Nodweddion Uwch
6.1 SuperSaw Waveform
The JT-4000 MICRO includes a modeling that reproduces the SuperSaw waveform, originally found in the JP-8000 synthesizer. This waveform provides a rich, detuned sound by layering multiple saw waves.
6.2 2-Operator FM Engine
The synthesizer features a 2-operator FM (Frequency Modulation) engine, which expands the range of available sounds beyond traditional subtractive synthesis. This allows for the creation of complex, metallic, or bell-like tones.
6.3 12-bit DAC
Equipped with a 12-bit Digital-to-Analog Converter (DAC), the JT-4000 MICRO can reproduce classic synthesizer sounds with a distinct character.
6.4 Arpeggiator
The built-in arpeggiator offers 3 patterns, allowing you to create rhythmic sequences from held chords. Press the ARP button to activate and configure the arpeggiator settings, such as tempo, pattern, and octave range.
7. cynnal
7.1 Glanhau
To clean the unit, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or waxes, as these can damage the finish and controls.
7.2 Storio
When not in use for extended periods, store the JT-4000 MICRO in a cool, dry place, away from direct sunlight and extreme temperatures. It is recommended to use the original packaging for protection.
8. Datrys Problemau
| Problem | Achos Posibl | Ateb |
|---|---|---|
| Dim allbwn sain | Volume knob is too low; headphones not connected; faulty headphones. | Cynydd CYFROL knob; ensure headphones are fully plugged in; test with different headphones. |
| Uned ddim yn troi ymlaen | USB Type-C cable not connected or faulty; power source issue. | Ensure USB Type-C cable is securely connected; try a different cable or power source. |
| Problemau cyfathrebu MIDI | Incorrect MIDI settings in DAW; faulty USB cable; driver issues. | Check MIDI settings in your DAW; try a different USB cable; ensure necessary drivers are installed (if applicable). |
| Ymddygiad annisgwyl | Gwall meddalwedd dros dro. | Disconnect and reconnect power to restart the unit. |
9. manylebau
- Enw'r Model: JT-4000 MICRO
- Math: Syntheseisydd Hybrid 4-Llais Cludadwy
- Osgiliaduron: Two analog modeling oscillators per voice
- Hidlo: Hidlydd analog
- FM Engine: 2-operator
- DAC: 12-did
- Bysellfwrdd: 16 allwedd cyffwrdd-sensitif
- Arpeggiator: 3 patrwm
- Cysylltedd: USB Type-C (power and MIDI), 3.5mm PHONES output
- Pwer: USB Math-C
- Dimensiynau (L x W x H): 4.92 x 2.24 x 6.22 modfedd (12.5 x 5.7 x 15.8 cm)
- Pwysau: 5.3 owns (150 gram)
- Deunydd Corff: Plastig
- Math Gorffen: Dark Grey Panel
- Cydrannau wedi'u Cynnwys: Syntheseisydd
10. Gwarant a Chefnogaeth
For warranty information and technical support, please refer to the official Behringer websafle neu cysylltwch â'ch dosbarthwr lleol. Cadwch eich prawf prynu ar gyfer unrhyw hawliadau gwarant.
