EARMOR M20T NRR26dB Electronic Shooting Ear Protection User Manual

Rhagymadrodd

The EARMOR M20T Electronic Shooting Ear Protection provides advanced hearing safety and communication capabilities for various noisy environments. Featuring a Noise Reduction Rating (NRR) of 26dB and Bluetooth 5.3 connectivity, these earbuds are designed to protect your hearing while allowing ambient sound amplification and seamless communication.

Cynnwys Pecyn

Gwiriwch fod yr holl eitemau a restrir isod wedi'u cynnwys yn eich pecyn:

• Achos Codi Tâl
• Clustffonau Di-wifr (Chwith a Dde)
• 3-Size Ear Covers
• 3-Size Cylindrical Foam Eartips
• Universal Conical Tip
• Muff Gwynt
• Retention Cord (Anti-Loss Lanyard)
• Cebl Codi Tâl USB-C
• Llawlyfr Defnyddiwr

Image: EARMOR M20T package contents.

Cyfarwyddiadau Gosod a Gwisgo

1. Dewis y Clustffonau Cywir

The EARMOR M20T comes with various sizes of foam eartips and ear covers to ensure a secure and comfortable fit. A proper fit is crucial for optimal noise reduction and sound quality. Experiment with different sizes to find the best seal for your ears.

2. Gwisgo'r Clustffonau

1. Gently squeeze the foam eartip to compress it. Ensure the foam tip is dry and bouncy before insertion.
2. Pull your ear upward with one hand to straighten the ear canal.
3. Rhowch y plwg clust cywasgedig i mewn i gamlas eich clust.
4. Hold the earplug in place for a few seconds until the foam fully expands and creates a tight seal.
5. Gently pull on the earbud to check if it fits tightly and securely.

Image: Proper wearing of EARMOR M20T earbuds.

3. Installing the Anti-Loss Rope

To prevent accidental loss of your earbuds, you can attach the included anti-loss rope:

1. Remove the foam eartips from the earbuds.
2. Thread one end of the anti-loss rope through the designated loop on the earbud.
3. Securely fix the rope to the earbud.
4. Reinstall the foam eartips back onto the earbuds.

Codi tâl

The EARMOR M20T earbuds are charged using the provided charging case. The case itself is rechargeable via a USB-C cable.

• Codi Tâl ar y Earbuds: Place the earbuds into their respective slots in the charging case. Ensure the contact points align. The indicator lights on the earbuds will illuminate to show they are charging.
• Codi Tâl am yr Achos: Connect the USB-C charging cable to the charging port on the case and plug the other end into a compatible USB power source. The indicator lights on the case will show the charging status.
• A full charge for the earbuds typically provides 4-5 hours of use. The charging case can provide up to 3 full charges for the earbuds.

Delwedd: Clustffonau mewn cas gwefru.

Cyfarwyddiadau Gweithredu

1. Pŵer Ymlaen / I ffwrdd

• Pŵer Ymlaen: Press and hold the button on each earbud for approximately 2 seconds until you hear a power-on prompt.
• Pwer i ffwrdd: Press and hold the button on each earbud for approximately 2 seconds until you hear a power-off prompt.

2. Newid Modd

The M20T features three operational modes: Silent, Indoor, and Outdoor. To switch between modes, briefly press the button on either earbud (approximately 1 second).

• Modd Tawel: Provides maximum noise reduction, ideal for environments requiring complete focus or extreme quiet.
• Modd Dan Do: Balances noise reduction with ambient sound amplification, suitable for indoor shooting ranges or workshops.
• Modd Awyr Agored: Offers enhanced ambient sound amplification for situational awareness while still protecting against harmful impulse noises, perfect for outdoor hunting or construction sites.

Image: One-Button Magic controls.

3. Pâr Bluetooth

• When the earbuds are powered on, they will automatically enter pairing mode (indicated by flashing blue and red lights).
• On your device (smartphone, tablet, etc.), enable Bluetooth and search for "M20T" in the list of available devices.
• Select "M20T" to connect. Once paired, the earbuds will automatically reconnect to your device when powered on and within range.

Image: Seamless Bluetooth Sync.

4. Rheoli Galwadau

• Ateb / Diwedd Galwad: Briefly press the button on either earbud once.
• Gwrthod Galwad: Press and hold the button on either earbud for approximately 2 seconds.

Nodweddion Allweddol

• NRR 26dB Hearing Protection: The M20T effectively muffles hazardous noises above 82dB, providing crucial hearing protection during high-decibel activities such as shooting, hunting, and operating loud machinery.
• Sain amgylchynol Ampgoleu: Advanced sound technology allows for clear amplification of important ambient sounds, enabling communication and situational awareness without removing the ear protection.
• Directional Clarity: Experience precise stereo surround sound for clear directional awareness, which is vital in tactical situations or hunting.
• Cysylltedd Bluetooth 5.3: Enjoy stable and seamless wireless connection for audio streaming and calls.

Image: Shockwave 26dB Defense.

Image: Advanced Ambient Awareness.

Image: Directional Clarity.

Cynnal a chadw

• Glanhau: Regularly clean the earbuds and charging case with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
• Amnewid Blaen y Glust: Replace eartips periodically or if they show signs of wear to maintain optimal hygiene and noise reduction performance.
• Storio: Storiwch y clustffonau yn eu cas gwefru pan nad ydynt yn cael eu defnyddio i'w hamddiffyn a chadwch wefr arnynt.

Datrys problemau

• Dim Sain/Ansawdd Sain Gwael:
  • Ensure earbuds are properly seated in the ear canal for a tight seal.
  • Check the selected mode (Silent, Indoor, Outdoor) is appropriate for your environment.
  • Verify Bluetooth connection is stable and volume is adjusted on both the earbuds and your connected device.
• Clustffonau Ddim yn Codi Tâl:
  • Ensure earbuds are correctly placed in the charging case and contact points are clean.
  • Check if the charging case itself has sufficient charge.
  • Gwiriwch fod y cebl USB-C a'r ffynhonnell bŵer yn gweithio'n gywir.
• Datgysylltu Bluetooth:
  • Ensure earbuds are within the effective range of your Bluetooth device.
  • Rhowch gynnig ar ddad-baru ac ail-baru'r clustffonau â'ch dyfais.

Manylebau

Gwarant a Chefnogaeth

EARMOR provides a 1-Year Money Back Guarantee ac a Gwarant Oes Cyfyngedig for the M20T Electronic Shooting Ear Protection. For detailed warranty terms, technical support, or service inquiries, please refer to the contact information provided in your product packaging or visit the official EARMOR websafle.