Byron Wireless Plug-in Doorbell Set

Rhagymadrodd

This manual provides instructions for the installation, operation, and maintenance of your Byron Wireless Plug-in Doorbell Set, Model DBY-22352BS. This set includes a wireless push button and a plug-in door chime, designed for convenient notification of visitors.

Cynnwys Pecyn

Gwiriwch fod yr holl eitemau a restrir isod yn bresennol yn eich pecyn:

• 1x Wireless Bell Push Button
• 1x Wireless Plug-in Door Chime
• 1x CR2032 Battery (for push button)
• Double-sided Tape (for mounting)
• Llawlyfr Cyfarwyddiadau (y ddogfen hon)

Image: The Byron Wireless Plug-in Doorbell Set, showing the main chime unit on the left and the push button on the right. Both units are black with the "Byron" logo.

Nodweddion

• Gweithrediad diwifr: Eliminates the need for complex wiring.
• Plug-in Chime: Receiver plugs directly into a standard power outlet.
• Ystod Estynedig: Up to 150 meters (unobstructed) wireless operating range.
• Dewis Alaw: 16 selectable melodies.
• Cyfrol Addasadwy: 5 volume levels for customized sound output.
• Gwrthsefyll Tywydd: IP44 protection rating for the push button, suitable for outdoor use.
• Gosodiad Hawdd: Includes all necessary mounting hardware.

Gosod

1. Install Push Button Battery: Agorwch y botwm gwthio casing (refer to diagrams if available in physical manual) and insert the supplied CR2032 battery, ensuring correct polarity. Close the casing yn ddiogel.
2. Mount Push Button:
   • Choose a suitable location near your door, avoiding direct metal surfaces which can interfere with the wireless signal.
   • Glanhewch yr arwyneb mowntio yn drylwyr.
   • Use the provided double-sided tape to adhere the push button to the desired location.
3. Plug in Door Chime: Insert the wireless plug-in door chime into a standard electrical outlet indoors. Ensure it is within the 150-meter unobstructed range of the push button.
4. Paru (os oes angen): The units are typically pre-paired from the factory. If the chime does not ring when the push button is pressed, refer to the "Troubleshooting" section or the full manual for specific pairing instructions.

Cyfarwyddiadau Gweithredu

1. Ringing the Doorbell: Press the push button once. The plug-in chime will sound the selected melody.
2. Newid Melodïau: Locate the melody selection button on the plug-in chime (refer to product diagrams if available). Press this button repeatedly to cycle through the 16 available melodies. The chime will play a preview of each melody as you select it.
3. Addasu cyfaint: Locate the volume control button on the plug-in chime. Press this button to cycle through the 5 available volume levels (low to high).

Cynnal a chadw

• Glanhau: Wipe the doorbell units with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Amnewid Batri (Gwthio Botwm): When the push button's signal weakens or stops working, replace the CR2032 battery. Open the casing, remove the old battery, and insert a new one with the correct polarity. Dispose of old batteries responsibly.
• Amodau Amgylcheddol: While the push button is IP44 rated, extreme weather conditions may affect performance. Ensure the chime unit is used indoors in a dry environment.

Datrys problemau

Manylebau

• Model: DBY-22352BS
• Brand: Byron
• Ystod Diwifr: Hyd at 150 metr (heb rwystr)
• Alawon: 16 detholadwy
• Lefelau cyfaint: 5 yn addasadwy
• Batri botwm gwthio: 1x CR2032 (wedi'i gynnwys)
• Chime Power: AC Plug-in
• Protection Rating (Push Button): IP44 (dustproof and splash-resistant)
• Dimensiynau Cynnyrch: 10.04 x 7 x 5.93cm; 610g

Gwarant a Chefnogaeth

For warranty information, technical support, or to purchase replacement parts, please refer to the official Byron websafle neu cysylltwch â'u hadran gwasanaeth cwsmeriaid. Cadwch eich prawf prynu ar gyfer hawliadau gwarant.

Gwneuthurwr: Byron

Websafle: www.byron.com (exampy ddolen, gall y ddolen wirioneddol amrywio)