FreedConn R1 Pro Motorcycle Bluetooth Headset with 2K Camera - Instruction Manual

1. Cynnyrch Drosview

The FreedConn R1 Pro is an advanced motorcycle Bluetooth headset integrated with a 2K camera, designed to enhance communication, safety, and recording capabilities for riders. It supports multi-person intercom, music sharing, and features a G-Sensor for automatic video locking during incidents.

Delwedd 1: Drosoddview of the FreedConn R1 Pro headset highlighting its key features including built-in camera, wireless intercom, Bluetooth 5.0, IP65 waterproof rating, voice reminder, voice calling, Wi-Fi technology, dual phone connection, music sharing, charging while in use, large battery volume, and Type-C port.

2. Beth sydd yn y Bocs

Upon unboxing your FreedConn R1 Pro, please ensure all the following components are present:

• 1 x R1 Pro Receiver Unit
• 1 x Headset with Microphone
• 1 x Helmet Mount
• 1 x Adhesive Mount
• Cerdyn TF 1 x 128G

3. Gosod a Gosod

3.1 Gosod Cerdyn Cof

The R1 Pro requires a TF (microSD) card for video recording. A 128GB TF card is included with your purchase.

1. Locate the TF card slot on the side of the R1 Pro unit.
2. Insert the TF card face up into the slot until it clicks into place. Ensure it is fully seated.

3.2 Mounting the Headset

Use either the helmet mount or adhesive mount to securely attach the R1 Pro to your motorcycle helmet. Follow the instructions provided with the mounts for proper installation.

4. Gweithrediad Sylfaenol

4.1 Power On/Off Bluetooth

• I Bweru Ymlaen: In the off state, press and hold the multi-function button for approximately 3 seconds until you hear a prompt tone, then release.
• I Bweru i ffwrdd: Press and hold the multi-function button for 3 seconds. The red light will turn on, then release the button.

4.2 Bluetooth Language Switching

In standby or music pause state, tap the multi-function key and the Wi-Fi key (intercom key) simultaneously to switch languages.

4.3 Addasiad Cyfaint

• Cynyddu Cyfrol: Turn the multi-function knob clockwise without letting go.
• Gostwng y Gyfrol: Turn the multi-function knob counter-clockwise without letting go.

Gweithrediad Radio 4.4 FM

• Troi’r Radio Ymlaen/Diffodd: In standby mode, double-click the multi-function knob to turn on the radio mode. Double-click again to turn it off.
• Newid Sianel: Turn the multi-function knob clockwise to go to the next channel. Turn it counter-clockwise to go to the previous channel.

5. Intercom and Music Sharing

5.1 Multi-Person Intercom Connection

The R1 Pro supports communication for 2-8 riders within a 1500M range. Follow these steps to set up a group chat:

1. Clear Pairing Records: In the power-on state, press and hold the power button on all units (A, B, C, D) for 3 seconds. Continue holding for 5 seconds until the red light flashes twice quickly. This clears previous pairings.
2. Pair Units Sequentially: Pair A with B, then turn off B. Pair B with C, then turn off C. Pair C with D.
3. Set Up Group Chat: Press A to connect to B, and press B to connect to C. At this point, units A, B, C, and D are successfully connected, and group calls can be made.

Image 2: Eight motorcyclists riding in a group, illustrating the 1500M wireless communication capability of the FreedConn R1 Pro headset.

5.2 Pairing with Other Brands

The R1 Pro is compatible with 90% of other brands' headsets. To pair:

1. Ensure the third-party headset is in pairing mode.
2. When the R1 Pro is powered on, turn the multi-function key clockwise and tap the Wi-Fi key (intercom key) to enter pairing mode.
3. Tap the Wi-Fi button (intercom button) again. You will hear the "Bluetooth is connected" prompt tone, indicating the headset has entered intercom mode.

5.3 Disconnect/Resume Intercom

Short press the Wi-Fi button (intercom button) to disconnect the Bluetooth intercom. Press it once more to re-enter the Bluetooth intercom mode.

5.4 Rhannu Cerddoriaeth

The R1 Pro allows music sharing between two paired units. Ensure both units have only each other's pairing information (clear previous records if necessary).

1. Complete Bluetooth pairing between the R1 Pro units and your mobile phones.
2. If both units are playing music, the unit that wants to share music needs to pause its music.
3. Either party can double-click the intercom button to open and share the music.
4. During sharing, the sharing unit can press the multi-function key to pause the music. The receiving unit can press the multi-function key to quit music sharing.

Image 3: Two motorcyclists riding side-by-side, illustrating the music sharing and active noise cancellation features of the FreedConn R1 Pro headset.

6. Gweithrediad Camera

6.1 Video Recording (On/Off)

• Dechrau Recordio: Press and hold the video switch button for 3 seconds. The green light will turn on, indicating recording has started.
• Recordio Saib: Press the record switch button once during recording.

Image 4: A close-up of the FreedConn R1 Pro headset highlighting its 2K Ultra-clear Sony Lens, capable of vivid and detailed video recording.

6.2 Cipio Lluniau

In recording state, double-click the power button to take a photo.

6.3 G-Sensor Lock

The built-in Gravity Sensor automatically locks the current video file when a collision is detected, protecting it from being overwritten. This ensures important footage is preserved as evidence.

Image 5: An illustration of the G-Sensor feature of the FreedConn R1 Pro, showing a motorcycle accident scene and a lock icon indicating automatic video protection.

6.4 Cofnodi Dolen

The loop recording function automatically overwrites the oldest unprotected file when the TF card is full, ensuring continuous recording without manual management.

6.5 Wi-Fi App Connection (RoadCam/KaKaOK)

The R1 Pro features a built-in Wi-Fi module for connecting to your mobile phone. Download the "RoadCam" or "KaKaOK" app to view and download recorded videos and photos.

1. Scan the QR code provided in the manual or product packaging to download the "RoadCam" or "KaKaOK" app.
2. Press the video start button on the R1 Pro to turn on the camera function.
3. Press the Wi-Fi button for 3 seconds to turn on Wi-Fi.
4. On your mobile phone, select "FreedConn" from the Wi-Fi list and enter the initial password "12345678" to connect.
5. Open the installed app on your phone. Click the camera icon to enter recording mode.
6. Within the app, you can preview, play, and download device videos and photos. You can also access settings to change Wi-Fi name/password, toggle video recording, set time watermark/loop recording time, adjust exposure compensation, format the memory card, and restore factory settings.

Image 6: A motorcyclist with the FreedConn R1 Pro headset, showing a smartphone displaying recorded video footage, illustrating the Wi-Fi connectivity and app functionality.

6.6 Recorder Reset to Factory Settings

In the standby state of the recorder, press and hold the Wi-Fi button for 8 seconds to reset the device to its factory settings.

7. manylebau

Image 7: The FreedConn R1 Pro headset displaying its 1500mAh battery capacity and various usage times, along with its IP65 waterproof rating.

8. Datrys Problemau

If you encounter any issues with your FreedConn R1 Pro, please try the following:

• Dim pŵer: Ensure the device is fully charged. Connect it to a power source using the provided Type-C cable.
• Problemau paru Bluetooth: Clear all previous pairing records on both the R1 Pro and your mobile device. Restart both devices and attempt pairing again. Refer to section 5.1 for detailed intercom pairing steps.
• Intercom Disconnection: Short press the Wi-Fi button (intercom button) to re-enter intercom mode. Ensure all units are within the specified range.
• Camera Not Recording: Check if a TF card is properly inserted and has sufficient free space. Ensure the camera function is turned on.
• Problemau Cysylltiad Ap: Verify that the R1 Pro's Wi-Fi is enabled and you have entered the correct password. Try restarting the app and the R1 Pro's Wi-Fi.
• Materion Ansawdd Sain: Ensure the headset is properly positioned in your helmet. The device features CVC and DSP intelligent noise reduction, but extreme wind noise can still affect clarity.
• Dyfais ddim yn ymateb: Perform a factory reset (refer to section 6.6).

9. Gwarant a Chefnogaeth

The FreedConn R1 Pro comes with a manufacturer's warranty. For specific warranty details, claims, or further technical assistance, please contact FreedConn customer support directly. Keep your purchase receipt as proof of purchase.

You can often find support contact information on the official FreedConn websafle neu drwy'r manwerthwr lle prynoch chi'r cynnyrch.