Multi TCA27QM Multifunction Alarm Clock User Manual

1. Rhagymadrodd

Diolch am brynuasing the Multi TCA27QM Multifunction Alarm Clock. This device combines a digital alarm clock with an LED night light, a 5W wireless charging pad for Qi-compatible devices, and a USB charging port. It also features a clear LCD display showing time, date, and room temperature. Please read this manual carefully to ensure proper use and maintenance of your device.

2. Gwybodaeth Diogelwch

• Peidiwch ag amlygu'r ddyfais i ddŵr na lleithder gormodol.
• Osgoi gosod y ddyfais ger ffynonellau gwres neu mewn golau haul uniongyrchol.
• Peidiwch â cheisio dadosod na newid y ddyfais. Bydd hyn yn gwneud y warant yn ddi-rym.
• Defnyddiwch yr addasydd pŵer a ddarperir neu gyfwerth ardystiedig yn unig.
• Cadwch allan o gyrraedd plant.
• Ensure proper ventilation when using the wireless charging function.

3. Cynnwys Pecyn

Gwiriwch y pecyn am yr eitemau canlynol:

• Multi TCA27QM Multifunction Alarm Clock
• Power Adapter (may be integrated or separate)
• Llawlyfr Defnyddiwr (y ddogfen hon)

4. Cynnyrch Drosview

Familiarize yourself with the components of your alarm clock:

Ffigur 1: Blaen View. This image displays the front of the Multi TCA27QM alarm clock, highlighting its large digital time display, date, temperature, and day of the week. The integrated LED night light is visible at the base, and control buttons are located on the top edge.

Figure 2: Wireless Charging Function. This image shows the alarm clock from an angle, with a smartphone resting on the designated wireless charging area at its base, demonstrating the device's charging capability.

Ffigur 3: Cefn View. The back of the alarm clock is shown, featuring the USB charging output port, the power input port, and speaker grilles.

Botymau Rheoli (Panel Uchaf):

• Botwm SET: Enters setting mode for time, date, and alarm.
• Botymau I FYNY/I LAWR: Adjust values during setting mode; also control display brightness.
• Botwm ALARM: Activates/deactivates alarm and enters alarm setting mode.
• Botwm SNOOZE/GOLEUO: Snoozes alarm; activates/deactivates night light.

Nodweddion Eraill:

• Arddangosfa LCD: Shows time, date, day, and temperature.
• Golau Nos LED: Located at the base, touch-activated.
• Pad Codi Tâl Di-wifr: For Qi-compatible devices (5W).
• Porthladd Codi Tâl USB: For wired charging of other devices.
• Porth mewnbwn pŵer: Yn cysylltu â'r addasydd pŵer.

5. Gosod

5.1 Cysylltiad Pwer

1. Connect the power adapter to the Power Input Port on the back of the alarm clock.
2. Plug the adapter into a standard wall outlet. The display will light up.

5.2 Gosod Amser a Dyddiad Cychwynnol

1. Pwyswch a dal y GOSOD button for 3 seconds to enter time setting mode. The hour digits will flash.
2. Defnyddiwch y UP or I LAWR botymau i addasu'r awr.
3. Gwasgwch GOSOD again to confirm the hour and move to minute setting. Adjust with UP/I LAWR.
4. Parhewch i bwyso GOSOD to cycle through and set the year, month, and day using the UP/I LAWR botymau.
5. After setting the day, press GOSOD one last time to exit setting mode.

Note: The device may use internal batteries for backup in case of power loss, but it primarily operates via the power adapter. No user-replaceable batteries are typically required for basic operation.

6. Cyfarwyddiadau Gweithredu

6.1 Setting and Activating Alarms

1. Pwyswch a dal y ALARM button for 3 seconds. The alarm hour digits will flash.
2. Defnyddiwch y UP or I LAWR botymau i osod yr awr larwm a ddymunir.
3. Gwasgwch ALARM again to confirm the hour and set the minutes. Adjust with UP/I LAWR.
4. Gwasgwch ALARM one more time to exit alarm setting mode.
5. To activate or deactivate the alarm, short press the ALARM botwm. Bydd eicon larwm yn ymddangos/diflannu ar yr arddangosfa.

6.2 Swyddogaeth Snooze

Pan fydd y larwm yn swnio, pwyswch y SNOOZE / GOLAU button to activate the snooze function. The alarm will temporarily stop and sound again after approximately 9 minutes.

6.3 Gweithrediad Goleuadau Nos

Figure 4: Night Light in Use. This image shows the alarm clock on a bedside table in a dimly lit room, with its integrated LED night light providing a soft glow.

• The LED night light is activated by touching the side of the device.
• Touch the side again to cycle through brightness levels or turn off the light.

6.4 Addasiad Disgleirdeb Arddangos

Byr wasg y UP or I LAWR buttons (when not in setting mode) to adjust the brightness of the LCD display.

6.5 Codi Tâl Di-wifr

Figure 5: Multiple Charging Options. The alarm clock is shown on a desk, simultaneously charging a smartphone wirelessly on its base and another device via its USB port, demonstrating its versatility.

• Place your Qi-compatible mobile device directly onto the wireless charging pad located at the base of the alarm clock.
• Gwnewch yn siŵr bod y ddyfais wedi'i chanoli ar y pad i gael y gwefru gorau posibl.
• A charging indicator (if available on your phone) will confirm charging has begun.

6.6 Codi Tâl USB

• Connect your device's USB charging cable to the USB Charging Port on the back of the alarm clock.
• Cysylltwch ben arall y cebl â'ch dyfais. Bydd y gwefru'n dechrau'n awtomatig.

6.7 Arddangosfa Tymheredd

The alarm clock automatically displays the ambient room temperature. No manual adjustment is required for this feature.

7. cynnal

• To clean the device, wipe it with a soft, dry cloth.
• Peidiwch â defnyddio glanhawyr neu doddyddion sgraffiniol.
• Cadwch y pad gwefru diwifr yn rhydd o lwch a malurion i sicrhau gwefru effeithlon.
• When not in use for extended periods, unplug the power adapter.

8. Datrys Problemau

9. manylebau

10. Gwarant a Chefnogaeth

This product comes with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact your retailer. For technical support or inquiries, please contact the customer service department of your retailer.

Cadwch eich prawf prynu ar gyfer hawliadau gwarant.