Llawlyfr Defnyddiwr Clustffon Bluetooth Beic Modur FreedConn R1 Plus gyda Chamera 1080P

1. Rhagymadrodd

The FreedConn R1 Plus is a versatile motorcycle Bluetooth headset designed to enhance your riding experience. It integrates a 1080P HD camera, Bluetooth 5.0 communication, and FM radio, allowing for seamless communication, entertainment, and recording of your journeys. This manual provides detailed instructions for setup, operation, and maintenance.

Image 1.1: FreedConn R1 Plus device with included 64GB TF card.

2. Nodweddion Cynnyrch

• Integrated 1080P HD Camera: Features a 120° wide-angle lens, 30 FPS video, and 2 MP images. Supports loop recording and a gravity sensor for collision evidence.
• Cysylltedd Bluetooth 5.0: Provides stable and fast connection for music, calls, and intercom.
• Intercom Aml-Feichiog: Supports communication for 2 to 6 riders within a 1000-1500 meter range.
• Lleihau Sŵn: CVC and DSP noise reduction technology ensures clear audio even at high speeds.
• Bywyd batri hir: 1500 mAh battery offers up to 48 hours music, 30 hours talk time, and 4.5 hours video recording. Supports simultaneous use and charging.
• Gwrthiant Dŵr: IP65 rated for protection against snow, rain, and mud.
• Cysylltiad Ffôn Deuol: Connects to two mobile phones simultaneously.
• Cynorthwyydd Llais: Activate your phone's voice assistant directly from the device.
• Radio FM: Built-in FM radio for listening to broadcasts.

3. Cynnwys Pecyn

Gwnewch yn siŵr bod yr holl eitemau yn bresennol yn eich pecyn:

• 1 x FreedConn R1 Plus Motorcycle Bluetooth Headset
• 1 x Microphone and Speaker 2-in-1 Set (Hard/Soft microphone options)
• Cerdyn TF 1 x 32GB
• 2 x Clipiau Mowntio
• 1 x Sgriwdreifer
• 1 x PTT Velcro Tape
• 4 x Velcro Earpads
• 1 x Cebl USB
• 1 x Cebl Sain
• 1 x Llawlyfr Defnyddiwr

Note: An adapter is not included. The device can be charged with any standard phone adapter.

4. Gosod

4.1 Mewnosod y Cerdyn TF

1. Open the TF card plug on the device.
2. Mewnosodwch y cerdyn cof yn y slot.
3. Close the TF card plug securely.

4.2 Lawrlwytho Ap

I view recorded videos and photos, download the 'Goplus Cam' app.

• Defnyddwyr iOS: Download 'Goplus Cam' directly from the App Store.
• Defnyddwyr Android: Open your phone's web browser, scan the QR code provided in the manual (page 20), and install the App. HUAWEI Harmony system users may need to exit 'Pure Mode' to scan and install.

4.3 Turning on WiFi

To connect the device to the app via WiFi:

1. Press and hold the power key of the camera for 3 seconds.
2. Press and hold the WiFi button for 3 seconds until you hear the voice reminder "WiFi Turned On".
3. On your phone, open the WLAN list, choose "Freedconn", and input the password "12345678" to connect.

4.4 Pairing with a Cell Phone

1. Press and hold the Multi-Function Button (MFB) for 6 seconds until the blue and red lights flash alternately. The Bluetooth is now in pairing status.
2. Open the Bluetooth list on your phone and select "R1 Plus" to connect.

5. Cyfarwyddiadau Gweithredu

5.1 Chwarae Cerdd

• Chwarae/Seibiant: Click the MFB to play music. Click again to suspend.
• Cân Nesaf/Blaenorol: Turn the jog wheel clockwise for the next song, anti-clockwise for the previous song.
• Addasiad Cyfaint: Clockwise turn and hold the jog wheel to increase volume, anti-clockwise turn and hold to decrease volume.

5.2 Galwadau Ffôn

• Galwadau Ateb: Incoming calls will be answered automatically after 10 seconds without any operation.
• Galwadau Hang Up: Press the MFB once to end an active call.
• Gwrthod Galwadau: Pwyswch a dal y MFB am 2 eiliad i wrthod galwad sy'n dod i mewn.

5.3 Actifadu Cynorthwyydd Llais

After pairing the Bluetooth with your phone, press and hold the MFB on the Bluetooth device for 2 seconds to activate your phone's voice assistant (e.g., Siri, Google Assistant).

Swyddogaeth Radio 5.4 FM

• Troi FM Ymlaen/Diffodd: Double-click the MFB when the Bluetooth is in power-off status to turn on FM. Repeat to turn off.
• Channel Adjustment: Turn the jog wheel clockwise or anti-clockwise to adjust the FM channel.
• Addasiad Cyfaint: Turn and hold the jog wheel to adjust the FM volume.

5.5 Recorder/Photo Function

• Dechrau Recordio: Press the camera's power key once to start recording. You will hear "Wi-Fi Turned On".
• Stopio Recordio: Press the camera's power key again to stop recording.
• Tynnu Llun: During recording, press the WiFi key once to take a quick photo.

5.6 Checking Recorded Videos and Photos on Phone

1. Ensure the device's WiFi is connected to your phone (see Section 4.3).
2. Open the 'Goplus Cam' App.
3. Click the Phone icon, then the File eicon.
4. Select the video or photo you wish to view neu lawrlwytho.

5.7 Setting Display Time

To synchronize the device's time with your phone:

1. Open the 'Goplus Cam' App.
2. Click the edition number on the bottom left.
3. Click "WIFI sport Cam Time" and then click "Enable".

5.8 Fformatio'r Cerdyn Cof

To format the TF card via the app:

1. Open the 'Goplus Cam' App.
2. Click the Setup Icon.
3. Slide the page down to find the "Format" option.
4. Click "Confirm" to finish the formatting.

5.9 Pâr Intercom

The R1 Plus supports intercom communication between multiple devices.

5.9.1 Pairing Two Devices

1. On both devices (A and B), press and hold the On/Off button for 8 seconds until the blue and red lights flash alternately. This indicates pairing status.
2. Click the On/Off button on either device (A or B) to search for the other. They will pair automatically.
3. When the blue and red lights turn to a regular blue light only, pairing is successful.

5.9.2 Pairing Up to Six Devices

The first and last device in the group (e.g., A and F) cannot be paired directly within the group. If they have existing pairing records, clear them in advance (see Section 5.10).

1. Pair device A and B, then turn off B.
2. Pair device B and C, then turn off C.
3. Pair device C and D, then turn off D.
4. Pair device D and E, then turn off E.
5. Pair device E and F.
6. Click the MFB separately on devices A, B, C, D to finish the group pairing.

Once paired, all devices A, B, C, D, E, F can communicate in the group at any time.

5.10 Clearing Bluetooth Pairing Records

To clear all previous Bluetooth pairing records:

1. Press and hold the On/Off button for 10 seconds when the Bluetooth is in the power-on status.
2. The red light will flash quickly 3 times, indicating that the pairing records have been cleared.

6. cynnal

• Glanhau: Defnyddiwch feddal, damp cloth to clean the device. Avoid harsh chemicals or abrasive materials.
• Gwrthiant Dŵr: The device is IP65 water-resistant, suitable for various harsh environments like snow, rain, and mud. However, avoid submerging it in water.
• Storio: Storiwch y ddyfais mewn lle oer, sych pan nad yw'n cael ei ddefnyddio.
• Gofal Batri: Charge the battery regularly, even if not in frequent use, to maintain its lifespan. Avoid extreme temperatures during charging and storage.

7. Datrys Problemau

8. manylebau

9. Gwarant a Chefnogaeth

For warranty information, technical support, or any questions regarding the use of your FreedConn R1 Plus device, please contact FreedConn customer service directly. Refer to the contact information provided in your product packaging or on the official FreedConn websafle.