Rhagymadrodd
This manual provides comprehensive instructions for the assembly, operation, and maintenance of your BONTEC Mobile Standing Desk. Designed for versatility and ergonomic comfort, this desk allows seamless transition between sitting and standing positions, promoting a healthier workstyle. Its mobile design makes it suitable for various environments, including offices, homes, and educational or medical settings.
Gwybodaeth Ddiogelwch Bwysig
Darllenwch a deallwch yr holl rybuddion a chyfarwyddiadau diogelwch cyn eu cydosod a'u defnyddio. Gall methu â dilyn y cyfarwyddiadau hyn arwain at anaf neu ddifrod i'r cynnyrch.
- Cyfyngiadau pwysau: Peidiwch â rhagori ar y capasiti llwyth uchaf o 33 pwys (15 kg) for the desktop and 11 pwys (5 kg) for the keyboard tray. Overloading can cause instability and damage.
- Cynulliad: Ensure all components are securely fastened according to the assembly instructions. Do not use the desk if any parts are missing or damaged.
- Sefydlogrwydd: The "H"-shaped frame base provides stability. Always ensure the desk is on a flat, stable surface. Lock the casters when the desk is in a stationary position to prevent accidental movement.
- Symudiad: When moving the desk, ensure all items are removed from the desktop and keyboard tray to prevent them from falling. Unlock the casters before moving.
- Plant ac Anifeiliaid Anwes: Keep children and pets away from the desk during assembly and operation. Moving parts can pose a pinch hazard.
- Pneumatic Spring: The height adjustment mechanism uses a pneumatic spring. Do not attempt to disassemble or tamper with the spring mechanism.
Rhestr Rhannau
Before beginning assembly, verify that all parts are present and undamaged. Refer to the diagram below for identification.
Figure 1: Fully assembled BONTEC Mobile Standing Desk.
Figure 2: Product dimensions including desktop, keyboard tray, and height range.
Mae cydrannau nodweddiadol yn cynnwys:
- Arwyneb Penbwrdd
- Hambwrdd Bysellfwrdd
- Main Support Column (with pneumatic spring)
- "H"-shaped Base
- Cloi Casters (x4)
- Bachyn Bag
- Caledwedd Cydosod (sgriwiau, wrench, ac ati)
Gosod a Chynulliad
All necessary tools for assembly are included. It is recommended to assemble the desk on a soft, clean surface to prevent scratches.
- Dadbacio Cydrannau: Carefully remove all parts from the packaging and lay them out. Check against the parts list to ensure everything is present.
- Atodwch y Castwyr i'r Sylfaen: Securely screw the four locking casters into the designated holes on the "H"-shaped base. Ensure they are tightened to prevent wobbling.
- Assemble Main Column to Base: Attach the main support column to the "H"-shaped base using the provided screws and tools. Ensure the connection is firm and stable.
- Install Keyboard Tray Supports: Fasten the keyboard tray supports to the main column or desktop assembly as indicated in the diagrams.
- Attach Keyboard Tray: Slide or attach the keyboard tray onto its supports. Ensure it can retract and extend smoothly.
- Mowntio Penbwrdd: Secure the desktop surface to the top of the main support column. Pay attention to the orientation for the integrated slot and keyboard tray alignment.
- Attach Bag Hook: Install the bag hook on the side of the main column as desired.
- Gwiriad Terfynol: Once assembled, gently shake the desk to ensure all connections are secure and there is no excessive wobble.
Figure 3: Close-up of special features including the convenient slot, bag hook, "H"-shaped frame base, and mute wheels.
Video 1: Official product video demonstrating the assembly and features of the BONTEC Mobile Standing Desk. This video provides a visual guide to the setup process and highlights key functionalities.
Cyfarwyddiadau Gweithredu
Addasiad Uchder
The desk features a pneumatic spring for smooth and effortless height adjustment, allowing you to switch between sitting and standing positions.
- To Adjust Upwards: Press the lever located under the desktop with your hand. The pneumatic spring will provide an upward force. Release the lever at your desired height.
- To Adjust Downwards: Press the lever with your hand and simultaneously apply downward pressure on the desktop. Release the lever at your desired height.
Figure 4: Illustration of the energy-saving gas spring mechanism for height adjustment, showing the lever and internal components.
Figure 5: Demonstrates the minimum (28.3 inches) and maximum (44 inches) height settings for sitting and standing use.
Using the Keyboard Tray
The keyboard tray is retractable, providing flexibility for your workspace setup.
- I Ymestyn: Gently pull the keyboard tray outwards until it reaches its full extension.
- I dynnu'n ôl: Push the keyboard tray inwards until it is fully tucked under the desktop.
Ffigur 6: O'r brig i lawr view showing the generous desktop storage, including the integrated slot for tablets or phones, and the keyboard tray.
Castrau Symudedd a Chloi
The four rolling casters allow for easy movement of the desk. Each caster is equipped with a locking mechanism.
- I symud: Ensure all casters are unlocked. Gently push the desk to your desired location.
- I Ddiogelu: Once the desk is in position, press down on the locking lever on each caster to prevent movement.
Cynnal a Chadw a Gofal
Proper care will ensure the longevity of your BONTEC Mobile Standing Desk.
- Glanhau: The MDF desktop is waterproof and scratch-resistant. Wipe surfaces with a soft, damp brethyn. Osgowch lanhawyr sgraffiniol neu gemegau llym.
- Caledwedd: Gwiriwch yr holl sgriwiau a chauwyr yn rheolaidd i sicrhau eu bod yn dal yn dynn. Ail-dynhau os oes angen.
- Casters: Cadwch y castellau'n rhydd o lwch a malurion i sicrhau rholio llyfn.
- Pneumatic Spring: No special maintenance is required for the pneumatic spring. Do not lubricate or attempt to open the mechanism.
Datrys problemau
Os byddwch chi'n dod ar draws unrhyw broblemau gyda'ch desg, cyfeiriwch at y problemau a'r atebion cyffredin canlynol:
| Problem | Achos Posibl | Ateb |
|---|---|---|
| Mae'r ddesg yn sigledig ar ôl ei chydosod. | Loose fasteners or uneven surface. | Check and tighten all screws. Ensure the desk is on a flat, level floor. |
| Height adjustment is stiff or not working. | Mechanism obstruction or improper lever use. | Ensure the lever is fully engaged. Check for any obstructions around the pneumatic column. Do not force the mechanism. |
| Keyboard tray does not slide smoothly. | Debris in tracks or misaligned supports. | Clean the tracks of the keyboard tray. Check if the supports are correctly installed and aligned. |
| Casters are not rolling or locking properly. | Debris in wheels or locking mechanism engaged. | Clear any debris from the wheels. Ensure the locking levers are fully disengaged for rolling or fully engaged for locking. |
Os yw'r broblem yn parhau, cysylltwch â chymorth cwsmeriaid.
Manylebau Cynnyrch
| Nodwedd | Manylyn |
|---|---|
| Brand | BONTEC |
| Rhif Model | MWS04 |
| Lliw | Du |
| Dimensiynau Cynnyrch (D x W x H) | 25.6"D x 17.7"W x 44"H |
| Ystod Addasu Uchder | 28.3" i 44" (72 cm i 112 cm) |
| Deunydd Penbwrdd | MDF |
| Deunydd Sylfaenol | Dur aloi |
| Capasiti Llwyth Penbwrdd | 33 pwys (15 kg) |
| Keyboard Tray Load Capacity | 11 pwys (5 kg) |
| Dimensiynau'r hambwrdd bysellfwrdd | 23.6" x 11.8" |
| Mecanwaith Codi | Niwmatig |
| Symudedd | 4 Cloi Casters |
| Cynulliad Angenrheidiol | Ydw (Pob offeryn wedi'i gynnwys) |
Gwybodaeth Gwarant
BONTEC products are manufactured to high-quality standards. For specific warranty details and terms, please refer to the warranty card included with your product or visit the official BONTEC websafle. Cadwch eich derbynneb prynu ar gyfer hawliadau gwarant.
Cefnogaeth i Gwsmeriaid
If you have any questions, require assistance with assembly, or need to report a damaged part, please contact BONTEC customer support. Contact information can typically be found on the product packaging or the official BONTEC websafle.
Am ragor o wybodaeth, ewch i'r BONTEC Store on Amazon.
