Orbit Easy Dial 6-Station Indoor Sprinkler Controller

1. Rhagymadrodd

The Orbit 6-zone indoor sprinkler controller is designed to provide convenient and flexible control over your lawn or garden watering schedule. Its user-friendly interface simplifies setup and customization, offering features such as rain delay, water budgeting, and dual watering programs to meet specific irrigation needs.

This manual provides detailed instructions for the installation, operation, and maintenance of your Orbit Easy Dial Sprinkler Controller.

Nodweddion Allweddol:

• Flexible Watering Options: Set water duration for each station between 1-240 minutes.
• Efficient Watering Schedule: Up to 8 start times per day to reduce water runoff.
• Rain Delay Feature: Pause watering for 24, 48, or 72 hours.
• Water Budgeting: Adjust run times based on seasonal changes.
• Dual Watering Programs: Independent programs for customized intervals, days of the week, or even/odd watering days.

Ffigur 1.1: Blaen view of the Orbit Easy Dial 6-Station Indoor Sprinkler Controller, showing the LCD display, control buttons, and rotary dial.

2. Gwybodaeth Diogelwch

Please read all safety information before installing or operating the controller. Failure to follow these instructions could result in injury or property damage.

• This controller is designed for defnydd dan do yn unig. Do not install outdoors or in areas exposed to water.
• Gwnewch yn siŵr bod y cyflenwad pŵer wedi'i ddatgysylltu cyn gwneud unrhyw waith gwifrau neu waith cynnal a chadw.
• All electrical connections should be made in accordance with local electrical codes.
• Peidiwch â cheisio atgyweirio'r uned eich hun. Cyfeiriwch yr holl waith cynnal a chadw at bersonél cymwys.

3. Gosod a Gosod

3.1 Gosod y Rheolydd

Choose a suitable indoor location near a standard 120V AC electrical outlet. Avoid areas with extreme temperatures or direct sunlight.

1. Marciwch y lleoliad gosod a ddymunir ar y wal.
2. Install two mounting screws (not included) into the wall, leaving approximately 1/8 inch (3 mm) of the screw head exposed. The screws should be spaced vertically to align with the keyhole slots on the back of the controller.
3. Hang the controller on the screws.

Ffigur 3.1: Example of the controller mounted on a wall in an indoor setting.

3.2 Gwifrau'r Rheolydd

Before wiring, ensure the power adapter is unplugged from the electrical outlet.

1. Gwifren Gyffredin (COM): Connect the common wire from your sprinkler valves to the terminal labeled 'COM' on the controller. This is typically a white wire.
2. Gwifrau Parth (1-6): Connect each individual zone wire from your sprinkler valves to the corresponding numbered terminals (1 through 6) on the controller.
3. Synhwyrydd Glaw (Dewisol): If using a rain sensor (sold separately), connect its wires to the 'SENSOR' terminals. Ensure the rain sensor switch inside the controller is set to 'ON' if a sensor is connected. If no sensor is used, keep the switch 'OFF' and ensure the jumper wire is in place between the sensor terminals.
4. Cysylltiad Pwer: Plug the included 24V AC transformer into the '24VAC' terminals on the controller. Then, plug the transformer into a standard 120V AC electrical outlet.

Ffigur 3.2: Manwl view of the wiring terminals, showing connections for 24VAC, SENSOR, COM, and zones 1-6.

4. Cyfarwyddiadau Gweithredu

The Orbit Easy Dial controller features a rotary dial for selecting functions and a set of buttons for adjusting settings.

Ffigur 4.1: Panel rheoli drosoddview, highlighting the LCD display, directional buttons, and function dial.

4.1 Gosod yr Amser a'r Dyddiad Cyfredol

1. Trowch y deial i DYDDIAD/CLOC.
2. Defnyddiwch y + a - buttons to set the current year, then press ENWCH.
3. Repeat for month, day, hour, and minute.

4.2 Programming Watering Schedules (Programs A & B)

The controller supports two independent programs (A and B) for different watering needs.

4.2.1 Setting Start Times

1. Trowch y deial i AMSER DECHRAU.
2. The display will show '1'. Use + a - to set the first start time, then press ENWCH.
3. Continue setting up to 8 start times for the current program. To skip a start time, press ENWCH without setting a time.
4. To switch between Program A and B, press the PROGRAM A-B botwm.

4.2.2 Setting Run Times (How Long)

1. Trowch y deial i PA MOR HYD.
2. The display will show 'STATION 1'. Use + a - to set the watering duration (1-240 minutes) for Station 1, then press ENWCH.
3. Repeat for each station (1-6).
4. To switch between Program A and B, press the PROGRAM A-B botwm.

4.2.3 Setting Watering Days (How Often)

1. Trowch y deial i PA MOR AML.
2. Gallwch ddewis o dri opsiwn:
• Dyddiau'r Wythnos: Defnyddiwch y SAETH I'R DDE button to move to the desired day, then press ENWCH to select/deselect.
• Cyfyngau: Defnydd + a - to set the interval (e.g., every 2 days).
• Even/Odd Days: Select 'EVEN' or 'ODD' for watering on even or odd calendar days.
3. To switch between Program A and B, press the PROGRAM A-B botwm.

4.3 Nodwedd Oedi Glaw

The rain delay feature allows you to temporarily suspend your watering schedule for a set period.

1. Trowch y deial i AWTO.
2. Gwasgwch y OEDI GLAW botwm.
3. Defnyddiwch y + a - buttons to select a delay of 24, 48, or 72 hours.
4. The controller will automatically resume the schedule after the delay period. To cancel, press CLIR.

4.4 Water Budgeting

The water budgeting feature allows you to adjust all programmed run times by a percentage, useful for seasonal adjustments without reprogramming each station.

1. Trowch y deial i CYLLIDEB.
2. Defnyddiwch y + a - buttons to adjust the percentage (e.g., 50% to reduce watering by half, 150% to increase by 50%).
3. The change applies to all active programs and stations.

4.5 Gweithredu â Llaw

To manually water a specific station or all stations:

1. Trowch y deial i AWTO.
2. Gwasgwch y LLAWLYFR botwm.
3. Defnyddiwch y SAETH I'R DDE or SAETH CHWITH buttons to select the desired station or 'ALL' for all stations.
4. Gwasgwch ENWCH.
5. Defnydd + a - to set the manual run time.
6. Gwasgwch ENWCH i ddechrau dyfrio â llaw.
7. To stop manual watering, press CLIR.

4.6 Turning Off the Controller

To stop all automatic watering, turn the dial to ODDI AR. The controller will retain its programming.

5. cynnal

• Keep the controller clean and free from dust and debris. Use a soft, dry cloth for cleaning.
• Ensure the controller is not exposed to moisture or direct water spray.
• Gwiriwch gysylltiadau gwifrau o bryd i'w gilydd i sicrhau eu bod yn ddiogel.
• During winter months in cold climates, it is recommended to disconnect the controller and store it indoors to prevent damage from freezing temperatures.

6. Datrys Problemau

7. manylebau

8. Gwarant a Chefnogaeth

For specific warranty information and detailed support, please refer to the official Orbit website or contact Orbit customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.

Orbit is a leading provider of watering solutions, committed to delivering quality products and customer satisfaction.

You can visit the official Orbit store for more information and product support: Siop Orbit ar Amazon