aigo AZ300 Mid Tower Computer Case User Manual

1. Rhagymadrodd

Thank you for choosing the aigo AZ300 Mid Tower Computer Case. This manual provides detailed instructions for the installation, operation, and maintenance of your new computer case. Please read this manual thoroughly before beginning installation to ensure proper setup and safe use.

Figure 1: aigo AZ300 Mid Tower Computer Case (White)

2. Gwybodaeth Diogelwch

• Always disconnect the power supply from the wall outlet before installing or servicing any components inside the case.
• Handle tempered glass panels with care. They are fragile and can break if dropped or subjected to impact.
• Avoid placing the case in areas with high humidity, extreme temperatures, or direct sunlight.
• Cadwch rannau bach a sgriwiau i ffwrdd o blant.
• Sicrhewch sylfaen gywir i atal peryglon trydanol.

3. Cynnyrch Drosview

3.1 Panel Mewnbwn/Allbwn Blaen

The front I/O panel provides convenient access to essential ports and controls.

Figure 2: Front I/O Panel Layout

• Porthladd Math-C: 1x USB Type-C port for modern connectivity.
• Porth USB 2.0: 1x USB 2.0 port for peripheral connections.
• Porth USB 3.0: 1x USB 3.0 port for high-speed data transfer.
• HD Audio (Headset/Microphone): Separate jacks for audio output and microphone input.
• Reset/LED Button: Resets the system or controls LED lighting (if applicable).
• Botwm Pŵer: Turns the computer on or off.

3.2 Internal Layout and Component Compatibility

The aigo AZ300 case offers a spacious interior designed for various component sizes and efficient cooling.

Figure 3: Internal Component and Cooling Layout

• Cydnawsedd Motherboard: Supports ATX, Micro-ATX, and ITX motherboards.
• Storage Drive Bays: 2x 2.5" SSD bays and 2x 3.5" HDD bays.
• Hyd GPU: Maximum GPU length of 400mm.
• PSU Length: Supports standard ATX power supplies up to 200mm.

4. Canllaw Gosod

4.1 Paratoi'r Achos

1. Rhowch y cas ar arwyneb gwastad, sefydlog.
2. Carefully remove the tempered glass side panels by unscrewing the thumb screws at each corner. Set the panels aside in a safe place.

Figure 4: Rear-Side View of Case

4.2 Gosod Motherboard

1. Install the I/O shield (if not pre-installed) into the rear opening of the case.
2. Align your ATX, Micro-ATX, or ITX motherboard with the standoffs inside the case. Ensure all standoffs match the motherboard's mounting holes.
3. Sicrhewch y famfwrdd gyda'r sgriwiau a ddarperir.

Figure 5: Motherboard Mounting Areas

4.3 Gosod Uned Cyflenwad Pwer (PSU)

1. Lleolwch yr ardal mowntio PSU ar waelod cefn y cas.
2. Slide your ATX power supply into the designated slot.
3. Secure the PSU to the case with screws from the rear.

4.4 Gosod Gyriant Storio

1. SSDs 2.5": Mount SSDs to the dedicated 2.5" bays, typically located behind the motherboard tray or in specific drive cages.
2. Gyriannau caled 3.5": Install HDDs into the 3.5" drive cages, usually found at the bottom front of the case.
3. Secure all drives with the appropriate screws.

Figure 6: Rear Internal View with Drive Bays

4.5 Expansion Card (GPU) Installation

1. Tynnwch y gorchuddion slot ehangu angenrheidiol o gefn y cas.
2. Mewnosodwch eich cerdyn graffeg neu gardiau ehangu eraill i'r slotiau PCIe priodol ar y famfwrdd.
3. Sicrhewch y cardiau gyda sgriwiau.

4.6 Gosod System Oeri

The aigo AZ300 supports flexible cooling configurations.

• Cefnogaeth Fan: Multiple 120mm fan mounting points are available at the top, front, and rear.
• Cefnogaeth Rheiddiadur: Supports water coolers with radiators of 360mm, 240mm, and 120mm in designated areas.

4.7 Rheoli Ceblau

Defnyddiwch y toriadau llwybro ceblau a'r pwyntiau clymu y tu ôl i hambwrdd y famfwrdd i reoli ceblau er mwyn gwella llif aer ac estheteg.

5. Gweithrediad

After all components are installed and connected, reattach the tempered glass side panels. Connect your peripherals, monitor, and power cable. Press the power button on the front I/O panel to start your system.

Use the USB ports (Type-C, USB 2.0, USB 3.0) for connecting external devices. The HD Audio jacks are for headphones and microphones.

6. cynnal

Mae cynnal a chadw rheolaidd yn helpu i sicrhau perfformiad a hirhoedledd gorau posibl cydrannau eich cyfrifiadur.

6.1 Glanhau'r Hidlydd Llwch

The aigo AZ300 case is equipped with dust filters to prevent dust buildup. Clean these filters periodically.

• Top Magnetic Dust Filter: Gently lift and remove the magnetic dust filter from the top panel. Clean it with compressed air or rinse with water (ensure it's completely dry before reattaching).
• Hidlydd Llwch PSU: The dust filter for the power supply is located at the bottom of the case. Slide it out for cleaning.

Figure 7: Side Panel and Bottom Dust Filter Location

7. Datrys Problemau

• System ddim yn troi ymlaen: Ensure all power cables (24-pin ATX, 8-pin CPU, GPU power) are securely connected. Check that the power supply switch is in the 'ON' position. Verify front panel power button connection to the motherboard.
• Dim arddangosfa: Confirm the monitor is connected to the graphics card (not the motherboard integrated graphics, unless no dedicated GPU is present). Reseat the graphics card and RAM modules.
• Gorboethi: Ensure all case fans are spinning and oriented correctly for airflow (intake/exhaust). Clean dust filters and internal components. Verify CPU cooler installation.
• USB ports not working: Check that the USB headers from the front panel are correctly connected to the motherboard.

8. manylebau

9. Gwarant a Chefnogaeth

aigo strives to provide excellent customer service. If you encounter any quality issues with your aigo AZ300 computer case, please contact us directly. We will assist you with troubleshooting and resolution.

For support, please refer to the contact information provided with your purchase or visit the official aigo websafle.