Llawlyfr Defnyddiwr Cyflenwad Pŵer ADVANTECH PS8-500FATX-GB 80+ Gold Flex ATX

Rhagymadrodd

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of the ADVANTECH PS8-500FATX-GB 80+ Gold Flex ATX Power Supply. This power supply unit (PSU) is designed to deliver stable and efficient power to your system, featuring 500W output with 3.3V, 5V, 12V, and -12V outputs, and RoHS compliance.

Gwybodaeth Diogelwch

Please read all safety instructions carefully before installing or operating the power supply. Failure to follow these instructions may result in electric shock, fire, or damage to the product and connected equipment.

Ensure the power supply is disconnected from the AC power source before installation or maintenance.
Peidiwch ag agor y cyflenwad pŵer casing. Cyfaint ucheltage components inside pose a risk of electric shock.
Gosodwch y cyflenwad pŵer mewn man sydd wedi'i awyru'n dda i atal gorboethi.
Use only the cables provided or approved by ADVANTECH for this power supply.
Mae'r cynnyrch hwn wedi'i gynllunio ar gyfer defnydd dan do yn unig.

Cynnwys Pecyn

Gwiriwch fod yr holl eitemau yn bresennol yn y pecyn:

ADVANTECH PS8-500FATX-GB Power Supply Unit
Cord pŵer AC
Sgriwiau Mowntio
Llawlyfr Defnyddiwr (y ddogfen hon)

Gosod a Gosod

Follow these steps to properly install the power supply into your system:

Paratowch Eich System: Ensure your computer system is powered off and disconnected from the AC outlet. Open the computer case.
Tynnwch yr Hen PSU (os yn berthnasol): Disconnect all cables from the old power supply. Unscrew and remove the old PSU from the chassis.
Gosod PSU Newydd: Carefully place the ADVANTECH PS8-500FATX-GB into the power supply bay of your computer case. Ensure the fan is facing the correct direction for optimal airflow (usually facing down or out of the case). Secure the PSU with the provided mounting screws.
Cysylltu'r Prif Geblau Pŵer:
- Connect the 20+4 pin ATX main power connector to the motherboard.
- Connect the 4+4 pin EPS/ATX 12V connector to the motherboard CPU power socket.
Cysylltu Ceblau Ymylol: Connect SATA power connectors to hard drives, SSDs, and optical drives. Connect PCIe power connectors to graphics cards if required. Connect Molex connectors to other peripherals as needed.
Rheoli Ceblau: Llwybrwch geblau'n daclus i wella llif aer ac estheteg.
Cau'r Cas a Chysylltu'r Pŵer AC: Close your computer case. Connect the AC power cord to the power supply and then to a wall outlet or surge protector.

ADVANTECH PS8-500FATX-GB Power Supply Unit with cables

Delwedd 1: The ADVANTECH PS8-500FATX-GB 500W Flex ATX Power Supply, showing its compact form factor and various power connectors. This image illustrates the physical appearance of the unit and its attached cabling.

Cyfarwyddiadau Gweithredu

Once installed, operating the power supply is straightforward:

Pŵer Ymlaen: After connecting all necessary cables and the AC power cord, press the power button on your computer case. The power supply will automatically provide power to your system.
Pwer i ffwrdd: Shut down your computer through the operating system. The power supply will enter a low-power state. For complete power disconnection, switch off the power supply's main switch (if present) or unplug the AC power cord.
Monitro: Modern motherboards and operating systems often provide tools to monitor power supply voltages. Refer to your motherboard manual for details.

Cynnal a chadw

Mae cynnal a chadw priodol yn sicrhau hirhoedledd a pherfformiad gorau posibl eich cyflenwad pŵer:

Glanhau Llwch: Periodically clean the power supply fan and vents to prevent dust buildup, which can impede airflow and cause overheating. Use compressed air for this purpose, ensuring the system is powered off and unplugged.
Archwiliad cebl: Regularly check all power cables for any signs of wear, fraying, or damage. Replace damaged cables immediately.
Amodau Amgylcheddol: Operate the power supply within its specified temperature and humidity ranges. Avoid extreme conditions.

Datrys problemau

Os byddwch chi'n dod ar draws problemau gyda'ch cyflenwad pŵer, cyfeiriwch at y problemau a'r atebion cyffredin canlynol:

Problem	Achos Posibl	Ateb
Nid yw'r system yn pweru ymlaen.	llinyn pŵer AC heb ei gysylltu. Power supply switch is off. Loose power connections. Cyflenwad pŵer diffygiol.	Ensure AC power cord is securely connected to PSU and wall outlet. Check if the power supply's main switch is in the 'ON' position. Verify all internal power cables (20+4 pin, 4+4 pin, SATA, PCIe) are firmly seated. Test with a known good power supply if possible.
Mae'r system yn troi ymlaen ond yn cau i lawr ar unwaith.	Gorlwytho neu gylched byr. Gorboethi.	Datgysylltwch gydrannau nad ydynt yn hanfodol a cheisiwch eto. Ensure proper ventilation and clean any dust from the PSU fan.
Synau anarferol o'r PSU.	Rhwystr neu fethiant ffan.	Power off and unplug the system. Inspect the fan for obstructions. If the noise persists, the fan may be failing, and the PSU might need replacement.

If the problem persists after trying these solutions, contact ADVANTECH customer support for further assistance.

Manylebau

Nodwedd	Manylyn
Model	PS8-500FATX-GB
Brand	ADVANTECH
Ffactor Ffurf	Flex ATX
Allbwn Wattage	500 Wat
Graddfa Effeithlonrwydd	80+ Aur
Allbwn Voltages	3.3V, 5V, 12V, -12V
Math o Gysylltydd	ATX (20+4 pin, 4+4 pin EPS/ATX 12V, SATA, PCIe, Molex)
Cydymffurfiad	RoHS
Pwysau Eitem	12.99 pwys
Gwneuthurwr	Advantech Co
ASIN	B08SMRH5V8
UPC	040048829683

Gwarant a Chefnogaeth

ADVANTECH products are designed for reliability and performance. For warranty information and technical support, please refer to the official ADVANTECH websafle neu cysylltwch â'u hadran gwasanaethau cwsmeriaid.

Swyddogol Websafle: www.advantech.com
Cefnogaeth i Gwsmeriaid: Refer to the "Contact Us" section on the official websafle ar gyfer manylion cymorth rhanbarthol.

Cadwch eich prawf prynu ar gyfer hawliadau gwarant.

	Advantech BB-232MSS2: RS-232 Four-port Mini Smart Switch / Port Combiner Detailed information on the Advantech BB-232MSS2, a 4-port RS-232 mini smart switch and port combiner. Features include configurable DTE/DCE master port, software/hardware control, and timer functions for reliable serial communication.
	Advantech ACP-4020 4U Rackmount Chassis - Specifications and Features Detailed specifications, features, ordering information, and visual descriptions for the Advantech ACP-4020, a 348mm depth 4U rackmount chassis designed for half-size SBC or ATX motherboards.
	Advantech AIMB-787 LGA1200 Industrial ATX Motherboard - Intel 10th Gen Core Detailed specifications, features, and connectivity options for the Advantech AIMB-787 industrial ATX motherboard. This board supports 10th Generation Intel Core, Pentium, and Celeron processors on the LGA1200 socket, featuring the Intel Q470E chipset, DDR4 memory support up to 128GB, multiple display outputs (DP/DVI-D/VGA), dual GbE LAN, M.2 slot, and comprehensive I/O.
	Llawlyfr Advantech RouterApp Samba Llawlyfr defnyddiwr ar gyfer modiwl cymhwysiad Samba ar ddyfeisiau Advantech RouterApp. Manylion disgrifiad o'r modiwl, web llywio rhyngwyneb, gosodiadau ffurfweddu byd-eang, trwyddedau OSS, a dogfennaeth gysylltiedig. Yn cwmpasu gosod a sefydlu swyddogaeth gweinydd Samba.
	Llawlyfr Caledwedd Llwybrydd Diwydiannol Uwch Advantech ICR-4233 LTE Mae'r Advantech ICR-4233 yn llawlyfr caledwedd Llwybrydd Diwydiannol Uwch LTE, sy'n manylu ar ei nodweddion, ei osodiad, a'i fanylebau technegol. Mae'r llwybrydd cadarn hwn yn cefnogi LTE Cat.6, SIM deuol, WiFi deuol-fand 6/6E, GNSS, rhyngwynebau lluosog (Ethernet, USB 3.0, RS232/RS485, Mewnbwn/Allbwn digidol), a swyddogaethau rhwydwaith uwch ar gyfer cymwysiadau IoT a diwydiannol heriol.
	Llawlyfr Defnyddiwr Llwybrydd Diwydiannol Advantech ICR-3231 LTE Llawlyfr defnyddiwr ar gyfer y Llwybrydd Diwydiannol Advantech ICR-3231 LTE, yn manylu ar ei nodweddion, manylebau technegol, gosodiad, a datrys problemau ar gyfer cymwysiadau diwydiannol ac IoT.

ADVANTECH PS8-500FATX-GB