Cynnyrch Drosview
The IKEA EKET cabinet legs are designed to elevate your EKET cabinet combination, creating a light and airy impression while also facilitating easier cleaning underneath the furniture. These metal legs feature adjustable height for stable placement on various floor surfaces.
Image: An EKET cabinet elevated by the 10 cm metal legs, demonstrating the clearance provided for cleaning and a lighter aesthetic.
Cynnwys Pecyn
- 4 x Metal Legs (Height: 10 cm, Diameter: 3 cm, Max adjustable height: 11 cm)
- Required fasteners for assembly
Cyfarwyddiadau Gosod a Chynulliad
This product requires assembly. Please follow the steps below carefully.
- Dadbacio Cydrannau: Carefully remove all parts from the packaging. Ensure all 4 legs and fasteners are present.
- Nodwch Bwyntiau Mowntio: Locate the designated mounting points on the underside of your IKEA EKET cabinet combination.
- Attach Mounting Plates: Securely attach the mounting plates of each leg to the cabinet using the provided fasteners. Ensure they are tightened firmly.
- Addasu uchder y goes: Once all legs are attached and the cabinet is placed in its desired location, adjust the height of each leg by rotating the foot until the cabinet is stable and level.
Cyfarwyddiadau Gweithredu
The primary function of these legs is to provide stable elevation for your EKET cabinet. The height adjustment feature allows for minor leveling on uneven floors. To adjust, simply rotate the bottom part of each leg clockwise to increase height or counter-clockwise to decrease it, until the cabinet is stable.
Cynnal a chadw
- Glanhau: Wipe the legs clean with a damp cloth. Follow with a dry, clean cloth to remove any moisture. Avoid using abrasive cleaners or harsh chemicals.
- Gwiriad Fastener: Periodically check that all fasteners attaching the legs to the cabinet are properly tightened. Re-tighten if necessary to maintain stability and safety.
Datrys problemau
- Siglo'r Cabinet: If the cabinet feels unstable or wobbles, ensure that all legs are securely attached and that their heights are adjusted correctly to compensate for any unevenness in the floor.
- Difficulty Attaching: Ensure you are using the correct fasteners and that the mounting plates are aligned with the pre-drilled holes on the EKET cabinet.
Manylebau
| Nodwedd | Manylyn |
|---|---|
| Rhif Model | 804.289.08 |
| Nifer | 4 ddarn fesul pecyn |
| Uchder | 10 cm (adjustable up to 11 cm) |
| Diamedr | 3 cm |
| Lliw | Metal (Silver) |
| Defnyddiau | Tube: Stainless steel, Foot: Polypropylene plastic, Mounting plate: Steel, Epoxy powder coating |
| Pwysau Cynnyrch | 750 grams (total for 4 legs) |
Gwybodaeth Diogelwch
For your safety and to ensure the longevity of your furniture, it is crucial to:
- Always ensure all fasteners are securely tightened during assembly.
- Periodically check the tightness of all fasteners and re-tighten them if necessary. Loose fasteners can lead to instability and potential damage.
Gwarant a Chefnogaeth
For information regarding warranty coverage or to seek support for your IKEA EKET cabinet legs, please refer to the official IKEA websafle neu cysylltwch â gwasanaeth cwsmeriaid IKEA yn uniongyrchol. Cadwch eich derbynneb prynu fel prawf o brynu.