1. Rhagymadrodd
This manual provides comprehensive instructions for the proper installation, operation, and maintenance of your SmallRig Camera Cage CCF2808, designed specifically for the FUJIFILM X-T4 camera. This aluminum alloy cage enhances the camera's protection and expands its accessory mounting capabilities.
Image 1.1: SmallRig Camera Cage CCF2808 installed on a FUJIFILM X-T4 camera.
2. Cynnwys Pecyn
Gwiriwch fod yr holl gydrannau yn bresennol yn eich pecyn:
- 1 x SmallRig Camera Cage CCF2808
- 1 x Built-in Flat Head Screwdriver (magnetically attached to the cage base)
Image 2.1: Package contents and product dimensions.
3. Gosod a Gosod
Follow these steps to securely attach the camera cage to your FUJIFILM X-T4 camera:
- Paratowch y Camera: Ensure your FUJIFILM X-T4 camera is powered off.
- Align the Cage: Carefully place the camera into the cage, aligning the 1/4"-20 screw hole on the camera's base with the corresponding screw on the cage. Ensure the anti-twist pin on the cage base engages with the camera's anti-twist hole for added stability.
- Diogelwch y Camera: Use the built-in flat head screwdriver, located magnetically at the bottom of the cage, to tighten the 1/4"-20 screw. Tighten until the camera is firmly secured within the cage, but do not overtighten.
Image 3.1: Detail of the secure mounting mechanism with 1/4"-20 screw and anti-twist pin.
4. Features and Usage
The SmallRig Camera Cage CCF2808 offers various features for expanding your camera setup:
4.1 Multiple Mounting Points
The cage is equipped with multiple 1/4"-20, 3/8"-16, and ARRI locating holes for attaching a wide range of accessories such as top handles, side handles, monitor mounts, and more.
4.2 NATO Rail and Cold Shoe Mount
A NATO rail is integrated on the left side of the cage, allowing for quick attachment and detachment of NATO-compatible accessories like NATO handles. A cold shoe mount is located on the top of the cage, suitable for mounting microphones, LED lights, or other cold shoe accessories.
Delwedd 4.1: Drosoddview of multiple mounting points on the cage.
4.3 Arca-Swiss Plate Integration
The bottom of the cage features an integrated Arca-Swiss plate, enabling quick transitions between Arca-Swiss compatible tripods and stabilizers without needing to remove the cage.
Image 4.2: Arca-Swiss plate integration for quick mounting on tripods and gimbals.
4.4 Optional Cable Clamp Ymlyniad
For enhanced cable management and protection, an optional dedicated HDMI & USB Cable Clamp (model BSC2809, sold separately) can be attached to the cage. This prevents accidental disconnections and damage to camera ports.
Image 4.3: Attachment point for the optional Cable Clamp BSC2809.
4.5 Dylunio Ergonomig
The cage features an ergonomic design that provides a comfortable grip, improving handling during extended use.
Image 4.4: Ergonomic design for comfortable handling.
5. cynnal
To ensure the longevity and optimal performance of your SmallRig Camera Cage CCF2808, follow these maintenance guidelines:
- Glanhau: Wipe the cage with a soft, dry cloth to remove dust and fingerprints. For stubborn dirt, use a slightly damp cloth and dry thoroughly. Avoid abrasive cleaners or solvents.
- Arolygiad: Periodically check all screws and mounting points for tightness. Re-tighten if necessary to prevent accidental camera movement or damage.
- Storio: Store the cage in a dry, clean environment when not in use.
6. manylebau
| Priodoledd | Manylyn |
|---|---|
| Rhif Model | CCF2808 |
| Cydweddoldeb | FUJIFILM X-T4 Camera |
| Deunydd | Aloi Alwminiwm |
| Dimensiynau Cynnyrch | 150.3 x 59 x 106 mm (5.91 x 2.32 x 4.17 modfedd) |
| Pwysau Net | 206 g (7.3 owns) |
| Pwyntiau Mowntio | 1/4"-20 threads, 3/8"-16 threads, ARRI locating holes, NATO rail, Cold shoe |
| Anti-twist Mechanism | 1/4"-20 screw with anti-twist pin |
| Plât Rhyddhau Cyflym | Integrated Arca-Swiss plate |
7. Datrys Problemau
If you encounter any issues with your SmallRig Camera Cage CCF2808, consider the following:
- Camera Movement within Cage: Ensure the 1/4"-20 screw is fully tightened and the anti-twist pin is correctly engaged.
- Accessory Fit Issues: Verify that your accessories are compatible with the cage's mounting standards (e.g., 1/4"-20, 3/8"-16, ARRI, NATO, cold shoe).
- Difficulty Accessing Camera Controls: The cage is designed to maintain access to most camera controls. If a specific control is obstructed, double-check the camera's seating within the cage.
8. Gwarant a Chefnogaeth
For warranty information and customer support, please refer to the official SmallRig websafle neu cysylltwch â'u gwasanaeth cwsmeriaid yn uniongyrchol. Cadwch eich derbynneb prynu fel prawf o brynu.
