PowerWalker VI 3000 SCL FR UPS User Manual

1. Rhagymadrodd

Thank you for choosing the PowerWalker VI 3000 SCL FR Uninterruptible Power Supply (UPS). This device is designed to provide reliable power protection for your electronic equipment against power outages, surges, and spikes. It ensures continuous operation and safeguards your valuable data and hardware.

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your UPS. Please read it thoroughly before using the product and keep it for future reference.

Figure 1.1: PowerWalker VI 3000 SCL FR UPS

This image shows the PowerWalker VI 3000 SCL FR UPS from an angled front perspective, highlighting its compact black casing and the front display panel.

2. Cyfarwyddiadau Diogelwch

Please observe the following safety precautions to ensure safe operation and to prevent damage to the UPS or connected equipment.

• Diogelwch Trydanol: Peidiwch ag agor yr UPS casing. There are no user-serviceable parts inside. Refer all servicing to qualified service personnel. Ensure the UPS is connected to a grounded power outlet.
• Lleoliad: Place the UPS in a well-ventilated area, away from direct sunlight, heat sources, and moisture. Do not block ventilation openings.
• Diogelwch Batri: The UPS contains internal batteries. Do not dispose of batteries in a fire, as they may explode. Do not open or mutilate batteries. Electrolyte is harmful to the skin and eyes.
• Gorlwytho: Do not overload the UPS. Ensure the total power consumption of connected devices does not exceed the UPS's rated capacity (1800W).

3. Cynnwys Pecyn

Carefully unpack the UPS and check the contents of the package. You should find the following items:

• PowerWalker VI 3000 SCL FR UPS Unit
• Llawlyfr Defnyddiwr (y ddogfen hon)
• USB Cable (for HID driver communication)
• Cordyn(iau) pŵer

Os oes unrhyw eitemau ar goll neu wedi'u difrodi, cysylltwch â'ch deliwr ar unwaith.

4. Cynnyrch Drosview

4.1 Panel Blaen

Figure 4.1: Front Panel of the UPS

This image displays the front panel of the PowerWalker VI 3000 SCL FR UPS, showing the LCD display and the power button.

1. Arddangosfa LCD: Shows real-time status information such as input/output voltage, battery level, load capacity, and various operational modes.
2. Botwm Pŵer: Used to turn the UPS ON or OFF.

4.2 Panel Cefn

Figure 4.2: Rear Panel of the UPS

This image illustrates the rear panel of the PowerWalker VI 3000 SCL FR UPS, detailing the various input/output ports and sockets.

1. COM.PORT (RS-232): Serial communication port for monitoring software.
2. Porth USB: USB communication port for monitoring software and HID driver functionality.
3. Output Sockets (French Type): Connect your critical equipment here. These outlets provide battery backup and surge protection.
4. Cord pŵer mewnbwn: Connects the UPS to the utility power outlet.
5. RJ11/RJ45 Protection (IN/OUT): Provides surge protection for telephone/network lines.
6. Botwm Ailosod: Used to reset the UPS in certain error conditions.

5. Gosod

5.1 Lleoliad

Choose a suitable location for your UPS:

• Place the UPS on a flat, stable surface.
• Ensure adequate airflow around the unit. Maintain at least 10 cm (4 inches) clearance from walls or other obstructions.
• Avoid areas with excessive dust, humidity, or extreme temperatures.

5.2 Cysylltu â Phwer

1. Connect the UPS input power cord to a grounded wall outlet.
2. Allow the UPS to charge for at least 8 hours before initial use to ensure optimal battery runtime. The UPS will charge whether it is turned ON or OFF.

5.3 Cysylltu Offer

1. Plug your computer, monitor, and other critical devices into the output sockets on the rear panel of the UPS.
2. Do not connect laser printers or shredders to the UPS, as their high surge current during startup may overload the unit.
3. For network/telephone line protection, connect your modem/router to the RJ11/RJ45 IN port and then connect the OUT port to your device.

6. Gweithredu

6.1 Turning the UPS ON/OFF

• I droi YMLAEN: Press and hold the power button on the front panel for approximately 3 seconds until you hear a beep and the LCD display illuminates.
• I Diffodd: Press and hold the power button for approximately 3 seconds until you hear a beep and the LCD display turns off.

6.2 Deall yr Arddangosfa LCD

The LCD display provides real-time status of the UPS. Key indicators include:

• Mewnbwn Voltage: Displays the current utility power voltage.
• Allbwn Voltage: Yn arddangos y cyftage supplied by the UPS to connected devices.
• Lefel Batri: Yn dangos faint o wefr sy'n weddill ar y batri.
• Cynhwysedd Llwyth: Yn dangos y canrantage o gapasiti'r UPS sy'n cael ei ddefnyddio gan ddyfeisiau cysylltiedig.
• Modd Gweithredu: Indicates if the UPS is operating on utility power (AC mode) or battery power (Battery mode).

6.3 Gosod Meddalwedd (Dewisol)

For advanced monitoring and management features, you can install the PowerWalker monitoring software. This software allows you to:

• Monitor UPS status and power conditions.
• Perform scheduled shutdowns.
• Receive alerts for power events.

Connect the UPS to your computer using the provided USB cable. The UPS supports HID (Human Interface Device) driver, allowing basic functionality without additional software on compatible operating systems.

7. cynnal

7.1 Gofal Batri

• To maintain optimal battery life, ensure the UPS is connected to a power outlet at all times to keep the batteries charged.
• Perform a battery calibration (if supported by software) or a full discharge/recharge cycle every 3-6 months to ensure accurate battery runtime readings.
• Batteries are consumable items and will degrade over time. Replace batteries when their runtime significantly decreases.

7.2 Glanhau

Glanhewch du allan yr UPS gyda lliain meddal, sych. Peidiwch â defnyddio glanhawyr hylif na glanhawyr aerosol. Gwnewch yn siŵr bod agoriadau awyru yn rhydd o lwch a malurion.

7.3 Storio

If storing the UPS for an extended period, ensure the batteries are fully charged. Recharge the batteries every three months to prevent permanent damage due to self-discharge.

8. Datrys Problemau

If you encounter issues with your UPS, refer to the following table for common problems and solutions:

If the problem persists after trying the above solutions, please contact customer support.

9. manylebau

Technical specifications for the PowerWalker VI 3000 SCL FR UPS:

10. Gwarant a Chefnogaeth

10.1 Gwybodaeth Gwarant

PowerWalker products are manufactured to the highest quality standards. This UPS comes with a standard manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included with your product or visit the official PowerWalker websafle am delerau ac amodau gwarant manwl.

10.2 Cefnogaeth i Gwsmeriaid

For technical assistance, troubleshooting, or warranty claims, please contact PowerWalker customer support. You can typically find contact information on the PowerWalker official websafle neu drwy eich dosbarthwr lleol.

Wrth gysylltu â chymorth, cofiwch gael rhif model eich cynnyrch (10121151) a'ch rhif cyfresol wrth law.