ECOELER 6-inch Dimmable LED Disk Light Instruction Manual

1. About Your ECOELER LED Disk Light

The ECOELER 6-inch Dimmable LED Disk Light is a high-quality, energy-efficient lighting solution designed for various indoor applications. This fixture provides bright, warm white illumination and features a low-profile design for seamless integration into your ceiling.

• Ansawdd Uchel: Features a 7.3-inch round metal light cover for corrosion protection and rust prevention. Equipped with high-quality LED chips, it delivers 1000 lumens at 16.5 watts, ensuring well-balanced light with no flickering and an estimated lifespan of 50,000 hours.
• Smooth Dimmable: Offers a full range of seamless dimming from 5% to 100%, allowing precise control over brightness for any situation, from a soft night glow to bright task lighting.
• Isel Profile Dyluniad: The ultra-thin 0.9-inch design provides a sleek look, ideal for spaces with low ceilings or for achieving a modern aesthetic.
• Ceisiadau Eang: Yn addas ar gyfer damp locations, making it perfect for entrances, living rooms, bedrooms, kitchens, dens, and covered outdoor areas.
• Sicrwydd Diogelwch: ETL and FCC listed, ensuring compliance with safety and quality standards.

2. Cynnwys Pecyn

Gwiriwch fod yr holl gydrannau yn bresennol cyn dechrau'r gosodiad:

• LED Disk Light Fixture (4 units)
• E26 Adapter and Spring Clips
• Installation Screws (Short and Long)
• Cnau Gwifren
• Llawlyfr Cyfarwyddiadau

3. Gwybodaeth Diogelwch

Please read and understand all instructions before installing or operating this product. Failure to do so may lead to electric shock, fire, or other hazards that could cause injury or property damage.

• RHYBUDD: Risg o sioc drydanol. Datgysylltwch bŵer wrth y ffiws neu'r torrwr cylched cyn gosod neu wasanaethu.
• RHYBUDD: Risk of fire. Use only in circuits rated for 120V AC.
• Rhaid i'r cynnyrch hwn gael ei osod yn unol â'r cod gosod cymwys gan berson sy'n gyfarwydd ag adeiladu a gweithredu'r cynnyrch a'r peryglon dan sylw.
• Ensure all electrical connections are secure and correct.
• Do not modify the fixture or use it for any purpose other than its intended use.
• Peidiwch â thrin y gêm â dwylo gwlyb.
• Yn addas ar gyfer damp lleoliadau.

4. Cyfarwyddiadau Gosod

The ECOELER LED Disk Light can be installed into either a standard junction box or a recessed can (5-inch or 6-inch).

4.1. Junction Box Installation

1. Trowch y pŵer i ffwrdd: Gwnewch yn siŵr bod y pŵer wedi'i ddatgysylltu wrth y torrwr cylched cyn cychwyn.
2. Tynnwch y lens: Gently twist the light lens counter-clockwise to remove it from the fixture base.
3. Cysylltu gwifrau: Connect the supply wires from the junction box to the fixture wires using the provided wire nuts (black to black, white to white, ground to ground).
4. Attach fixture to junction box: Align the fixture base with the junction box and secure it using the provided screws.
5. Reattach lens: Twist the lens clockwise onto the fixture base until secure.
6. Adfer pŵer: Trowch y pŵer yn ôl ymlaen wrth y torrwr cylched.

4.2. Recessed Can Installation

1. Trowch y pŵer i ffwrdd: Gwnewch yn siŵr bod y pŵer wedi'i ddatgysylltu wrth y torrwr cylched cyn cychwyn.
2. Tynnwch y lens: Gently twist the light lens counter-clockwise to remove it from the fixture base.
3. Install E26 adapter: Screw the E26 adapter into the existing recessed can socket.
4. Cysylltu gwifrau: Connect the fixture wires to the E26 adapter wires using the provided wire nuts (black to black, white to white).
5. Install spring clips: Attach the spring clips to the designated slots on the fixture base.
6. Push disk into can: Carefully push the LED disk light into the recessed can until the spring clips hold it securely in place, flush with the ceiling.
7. Reattach lens: Twist the lens clockwise onto the fixture base until secure.
8. Adfer pŵer: Trowch y pŵer yn ôl ymlaen wrth y torrwr cylched.

5. Cyfarwyddiadau Gweithredu

The ECOELER LED Disk Light is designed for simple operation and offers smooth dimming capabilities.

5.1. Troi Ymlaen/Diffodd

Operate the light using a standard wall switch connected to the fixture's circuit.

5.2. Swyddogaeth Pylu

This fixture is compatible with most standard LED dimmers, allowing for smooth brightness adjustment from 5% to 100%. To dim the light, use a compatible dimmer switch (not included) installed in your electrical system.

6. cynnal

The ECOELER LED Disk Light requires minimal maintenance.

• Glanhau: I lanhau'r gosodiad, gwnewch yn siŵr bod y pŵer wedi'i ddiffodd. Defnyddiwch liain meddal, sych, neu ychydig yn feddal.amp cloth. Do not use harsh chemicals or abrasive cleaners, as they may damage the finish or electrical components.
• Dim Rhannau Defnyddiadwy i Ddefnyddwyr: The LED light source is integrated and not user-replaceable. Do not attempt to disassemble the fixture.

7. Datrys Problemau

If you experience issues with your ECOELER LED Disk Light, refer to the following common problems and solutions:

If problems persist, contact ECOELER customer support for assistance.

8. manylebau

9. Gwarant a Chefnogaeth

ECOELER products are designed for quality and durability. This product comes with a limited warranty.

• Gwarant: Refer to the product packaging or ECOELER's official websafle ar gyfer telerau ac amodau gwarant penodol.
• Cefnogaeth i Gwsmeriaid: If you encounter any problems during use or have questions regarding installation or operation, please contact ECOELER customer service. We aim to provide a reply within 24 hours.