1. Rhagymadrodd
This manual provides essential information for the safe and efficient operation of your Behringer NX3000D Ultra-Lightweight 3000 Watt Class-D Power Amplifier. Please read it thoroughly before use to ensure optimal performance and longevity of your device.
Nodweddion Allweddol:
- Delivers 2 x 1500 Watts into 2 Ohms; 2 x 900 Watts into 4 Ohms; 3000 Watts into 4 Ohms (Bridge mode).
- Weighs less than 7.9 lbs / 3.6 kg, ensuring portability.
- Features revolutionary cool-running high-density Class-D technology for ultimate reliability and near-zero thermal buildup.
- Equipped with an ultra-efficient switch-mode power supply for noise-free audio, superior transient response, and low power consumption.
- High-performance DSP and 24-bit/96 kHz converters provide ultimate signal integrity and extreme dynamic range.
- DSP section includes sophisticated delay, crossover (3 filter types, up to 48 dB/octave), EQ (8 parametric, 2 dynamic), dynamics processing, and lockable security settings.
2. Cyfarwyddiadau Diogelwch Pwysig
Dilynwch y rhagofalon diogelwch sylfaenol hyn bob amser wrth ddefnyddio'ch ampllewywr:
- Darllenwch y cyfarwyddiadau hyn.
- Cadwch y cyfarwyddiadau hyn.
- Gwrandewch ar bob rhybudd.
- Dilynwch yr holl gyfarwyddiadau.
- Peidiwch â defnyddio'r offer hwn ger dŵr.
- Glanhewch â lliain sych yn unig.
- Peidiwch â rhwystro unrhyw agoriadau awyru. Gosod yn unol â chyfarwyddiadau'r gwneuthurwr.
- Peidiwch â gosod yn agos at unrhyw ffynonellau gwres fel rheiddiaduron, cofrestrau gwres, stofiau, neu gyfarpar arall (gan gynnwys amplifyddion) sy'n cynhyrchu gwres.
- Peidiwch â threchu pwrpas diogelwch y plwg polariaidd neu'r math o sylfaen. Mae gan blwg polariaidd ddau lafn gydag un yn lletach na'r llall. Mae gan blwg daearu ddau lafn a thrydydd prong sylfaen. Darperir y llafn llydan neu'r trydydd prong er eich diogelwch. Os nad yw'r plwg a ddarperir yn ffitio i mewn i'ch allfa, ymgynghorwch â thrydanwr i gael gwared ar yr allfa ddarfodedig.
- Amddiffynnwch y llinyn pŵer rhag cael ei gerdded ymlaen neu ei binsio, yn enwedig wrth blygiau, cynwysyddion cyfleustra, a'r pwynt lle maent yn gadael y cyfarpar.
- Defnyddiwch atodiadau/ategolion a nodir gan y gwneuthurwr yn unig.
- Defnyddiwch gyda'r drol, stand, trybedd, braced, neu fwrdd a bennir gan y gwneuthurwr yn unig, neu a werthir gyda'r offer. Pan ddefnyddir trol, byddwch yn ofalus wrth symud y cyfuniad cart/offer i osgoi anaf rhag tip-over.
- Tynnwch y plwg o'r cyfarpar hwn yn ystod stormydd mellt neu pan na chaiff ei ddefnyddio am gyfnodau hir o amser.
- Cyfeirio pob gwasanaeth i bersonél gwasanaeth cymwys. Mae angen gwasanaethu pan fydd y cyfarpar wedi'i ddifrodi mewn unrhyw ffordd, fel llinyn cyflenwad pŵer neu blwg wedi'i ddifrodi, hylif wedi'i ollwng neu wrthrychau wedi disgyn i'r offer, mae'r cyfarpar wedi bod yn agored i law neu leithder, nid yw'n gweithredu'n normal , neu wedi cael ei ollwng.
3. Beth sydd yn y Bocs
Upon unpacking your Behringer NX3000D, ensure all items listed below are present and in good condition:
- Behringer NX3000D 3000W Ultra-Lightweight Class-D Power Ampllewywr
- Cebl Pŵer
- Quick Start Guide (this document serves as the comprehensive manual)
Os oes unrhyw eitemau ar goll neu wedi'u difrodi, cysylltwch â'ch deliwr ar unwaith.
4. Cynnyrch Drosview
Familiarize yourself with the front and rear panels of your NX3000D ampllewywr.
4.1 Panel Blaen
Delwedd: Blaen view of the Behringer NX3000D Power Amplifier, showing the main display, control knobs for channels A and B, and status indicators.
Delwedd: Blaen onglog view of the Behringer NX3000D Power Amplifier, highlighting the rack-mountable design and ventilation grilles.
- Botwm Pŵer: Yn troi y amplifier ymlaen neu i ffwrdd.
- Level Controls (CH A/CH B): Addaswch sensitifrwydd y mewnbwn ar gyfer pob sianel.
- Arddangosfa LCD: Shows DSP settings, operating modes, and status information.
- Navigation Buttons (SETUP, PROCESS, UP/DOWN, EXIT): Used to navigate and adjust DSP parameters.
- LED Indicators (SIGNAL, LIMIT, PROTECT): Provide visual feedback on signal presence, clipping, and protection status.
4.2 Panel Cefn
Delwedd: Cefn view of the Behringer NX3000D Power Amplifier, displaying input and output connectors, cooling fan, and power inlet.
Delwedd: Cefn onglog view of the Behringer NX3000D Power Amplifier, showing the USB port for PC connection and additional ventilation.
- Mewnbwn AC: Yn cysylltu â'r prif gyflenwad pŵer gan ddefnyddio'r cebl pŵer a ddarperir.
- Input Connectors (CH A/CH B): XLR/TRS combo jacks for connecting audio sources.
- Output Connectors (CH A/CH B): Twist-lock speaker connectors for connecting loudspeakers.
- Porth USB: For connecting to a computer for DSP control and firmware updates.
- Fan oeri: Ensures proper thermal management of the ampllewywr.
5. Gosod
Follow these steps to set up your Behringer NX3000D ampllewywr:
- Lleoliad: Swydd y amplifier in a well-ventilated area, away from direct sunlight, heat sources, and moisture. Ensure adequate space around the unit for airflow. For rack mounting, secure the amplifier using appropriate rack screws.
- Cysylltiad Pwer: Connect the supplied AC power cable to the AC input on the rear panel of the ampy pŵerwr ac yna i soced pŵer addas. Sicrhewch fod y amplifier's power switch is in the OFF position before connecting.
- Cysylltiadau Mewnbwn: Connect your audio source (e.g., mixer, audio interface) to the Input Connectors (CH A and/or CH B) on the rear panel using XLR or 1/4" TRS cables.
- Cysylltiadau Allbwn: Connect your passive loudspeakers to the Output Connectors (CH A and/or CH B) using high-quality speaker cables with twist-lock connectors. Ensure correct polarity (+ to + and - to -) and that the impedance of your speakers matches the amplifier's capabilities (2 Ohms, 4 Ohms, or Bridge mode 4 Ohms).
- Pŵer Cychwynnol Ar: With all connections secure and input levels turned down, switch the amplifier's power button to the ON position. The display will illuminate, and the unit will perform a self-test.
6. Gweithredu y Ampllewywr
The Behringer NX3000D features advanced DSP control for precise sound optimization.
6.1 Gweithrediad Sylfaenol
- Addasu Lefelau: Slowly increase the Level Controls for CH A and/or CH B until the desired volume is achieved. Monitor the SIGNAL and LIMIT LEDs to prevent clipping. The SIGNAL LED indicates audio presence, while the LIMIT LED indicates that the signal is approaching clipping.
- Statws Monitro: The PROTECT LED will illuminate if the amplifier enters protection mode due to overheating, short circuits, or other issues. If this occurs, turn off the amplifier, resolve the issue, and then power it back on.
6.2 Rheolaeth DSP
The integrated DSP allows for comprehensive sound shaping and system management:
- Accessing DSP Settings: Defnyddiwch y GOSODIAD button to enter the main DSP menu. Navigate through options using the I FYNY/I LAWR buttons and confirm selections with the rotary encoder.
- Croesiad: Configure high-pass and low-pass filters for each channel. Choose from 3 filter types (e.g., Butterworth, Linkwitz-Riley) and slopes up to 48 dB/octave. This is crucial for integrating subwoofers or bi-ampsystemau ing.
- Cydraddoli (EQ): Utilize the 8 parametric EQs and 2 dynamic EQs per channel to fine-tune the frequency response. This helps in correcting room acoustics or tailoring the sound to specific preferences.
- Oedi: Apply delay to individual channels to align speakers in different physical positions, ensuring phase coherence.
- Prosesu Dynameg: Adjust compression, limiting, and gating settings to control the dynamic range of your audio.
- SmartSense Loudspeaker Impedance Compensation: This feature automatically adjusts the amplifier's output to match the loudspeaker impedance, providing consistent power delivery and improved sound quality.
- Gosodiadau Diogelwch: Lock DSP settings to prevent unauthorized changes, ideal for fixed installations.
For detailed DSP parameter adjustments, refer to the full software manual available on the Behringer website or connect the amplifier to a PC via the USB port for software control.
7. cynnal
Mae cynnal a chadw priodol yn sicrhau hirhoedledd a pherfformiad gorau posibl eich ampllewywr.
- Glanhau: Glanhewch y tu allan i'r tu allan yn rheolaidd amplifier with a soft, dry cloth. Do not use liquid cleaners or solvents. Ensure ventilation grilles are free from dust and debris.
- Awyru: Sicrhewch bob amser bod y amplifier's ventilation openings are not obstructed. Overheating can lead to reduced performance and potential damage.
- Storio: Os yn storio'r amplifier for an extended period, disconnect it from power, clean it, and store it in a cool, dry place, preferably in its original packaging or a protective case.
8. Datrys Problemau
If you encounter issues with your Behringer NX3000D, consult the table below for common problems and solutions.
| Problem | Achos Posibl | Ateb |
|---|---|---|
| Dim pŵer | Power cable disconnected; Power outlet faulty; Ampffiws lifer wedi chwythu. | Check power cable connection; Test outlet with another device; Contact qualified service personnel for fuse replacement. |
| Dim allbwn sain | Input/output cables disconnected or faulty; Speaker impedance mismatch; Amplifier in protect mode; Input levels too low. | Check all cable connections; Verify speaker impedance; Check PROTECT LED and resolve underlying issue; Increase input levels gradually. |
| Sain gwyrgam | Input signal too high (clipping); Speaker impedance mismatch; Faulty cables or speakers. | Reduce input signal (monitor LIMIT LED); Verify speaker impedance; Test with different cables/speakers. |
| Amplifier overheats (PROTECT LED on) | Insufficient ventilation; Excessive load (low impedance speakers); Prolonged high-power operation. | Ensure proper ventilation; Use speakers with correct impedance; Reduce output level or allow cooling time. |
If the problem persists after attempting these solutions, please contact Behringer support or a qualified service technician.
9. Manylebau Technegol
| Nodwedd | Manyleb |
|---|---|
| Brand | Behringer |
| Rhif Model | NX3000D |
| Allbwn Wattage | 2 x 1500 Watts (2 Ohms); 2 x 900 Watts (4 Ohms); 3000 Watts (4 Ohms Bridge mode) |
| Llefarydd Amplification Math | Dosbarth-D |
| Pwysau Eitem | 7.92 pounds / 3.6 Kilograms |
| Dimensiynau Cynnyrch | 19.02 x 9.09 x 3.7 modfedd |
| Math o Gysylltydd | Twist-lock (Outputs), XLR/TRS Combo (Inputs) |
| Ffynhonnell Pwer | Trydan Corded |
| Cyftage | 100V |
| Lliw | Du |
| DSP | High-performance DSP with 24-bit/96 kHz converters, delay, crossover, EQ, dynamics processing, SmartSense Impedance Compensation |
10. Gwarant a Chefnogaeth
10.1 Gwarant Cynnyrch
The Behringer NX3000D amplifier typically comes with a Gwarant cyfyngedig 3 mlynedd, indicating its design and engineering quality. Please refer to the warranty card included with your product or visit the official Behringer websafle ar gyfer telerau ac amodau manwl.
Image: Behringer logo with a '3 Years Warranty' badge, indicating the product is designed and engineered in Germany.
10.2 Cefnogaeth Dechnegol
For technical assistance, troubleshooting beyond this manual, or service inquiries, please visit the official Behringer website or contact their customer support. You can find more information and resources at the Siop Behringer.
