Moxa EDS-208 8-Port Unmanaged Ethernet Switch

1. Rhagymadrodd

This manual provides instructions for the installation, operation, and maintenance of the Moxa EDS-208 8-Port Unmanaged Ethernet Switch. The EDS-208 is designed for industrial networking applications, offering reliable 10/100BaseT(X) Ethernet connectivity in a compact, unmanaged form factor.

2. Gwybodaeth Diogelwch

• Darllenwch yr holl gyfarwyddiadau yn ofalus cyn gweithredu'r ddyfais.
• Sicrhewch y cyflenwad pŵer cyftage is within the specified range for the device. A power supply is not included and must be purchased separately.
• Peidiwch â gwneud y ddyfais yn agored i leithder neu dymheredd eithafol.
• Dim ond personél cymwys ddylai berfformio gosod a chynnal a chadw.
• Datgysylltwch y pŵer cyn glanhau neu wasanaethu'r ddyfais.

3. Cynnwys Pecyn

Before installation, verify that the package contains the following items:

• Moxa EDS-208 Unmanaged Ethernet Switch
• Canllaw Gosod Cyflym (os yw wedi'i gynnwys)
• Cerdyn Gwarant (os yw wedi'i gynnwys)

Os oes unrhyw un o'r eitemau hyn ar goll neu wedi'u difrodi, cysylltwch â'ch cynrychiolydd gwerthu i gael cymorth.

4. Cynnyrch Drosview

Ffigur 1: Moxa EDS-208 Unmanaged Ethernet Switch. This image displays the Moxa EDS-208 unmanaged Ethernet switch. The front panel features eight 10/100BaseT(X) RJ45 ports, numbered 1 through 8. Above the ports, the Moxa logo is visible, along with a 'P' indicator and a power LED. At the top, a green removable terminal block is present for power input. The device has a dark grey plastic housing with ribbed sides for heat dissipation.

4.1. Cynllun y Panel Blaen

• Power Input Terminal Block: Located at the top, a green removable terminal block for connecting the DC power supply.
• Power LED (P): Yn nodi statws pŵer y ddyfais.
• 10/100BaseT(X) Ports (1-8): Eight RJ45 ports for connecting Ethernet devices. Each port supports 10 Mbps or 100 Mbps operation.
• LEDs Cyswllt/Gweithgaredd: Integrated into each RJ45 port, these LEDs indicate network link status and data activity.

5. Gosod

5.1. Mowntio'r Switsh

The EDS-208 supports DIN-rail mounting. To mount the switch:

1. Attach the DIN-rail mounting kit (if not pre-installed) to the rear of the switch.
2. Hook the top of the DIN-rail clip over the top edge of the DIN rail.
3. Press the switch firmly against the DIN rail until the clip snaps into place.

5.2. Pŵer Cysylltu

Important: A power supply is NOT included with the EDS-208 and must be purchased separately. Ensure the power supply meets the device's voltage a gofynion cyfredol.

1. Sicrhewch fod y ffynhonnell pŵer wedi'i diffodd.
2. Connect the positive and negative wires from your DC power supply to the corresponding terminals on the green removable terminal block at the top of the switch. Refer to the terminal block markings for correct polarity.
3. Insert the terminal block firmly into its receptacle on the switch.
4. Turn on the power source. The 'P' LED on the front panel should illuminate, indicating power is supplied.

5.3. Cysylltu Dyfeisiau Rhwydwaith

Connect standard Ethernet cables (Cat5e or better) from your network devices (e.g., computers, servers, other switches) to any of the eight RJ45 ports on the front panel of the EDS-208. The switch automatically detects the speed (10 Mbps or 100 Mbps) and duplex mode of the connected devices.

6. Gweithredu'r Switsh

6.1. Dangosyddion LED

The EDS-208 features several LED indicators to provide status information:

• Power LED (P):
  • Ar: Mae'r switsh yn derbyn pŵer.
  • Wedi diffodd: Nid yw'r switsh yn derbyn pŵer.
• Link/Activity LEDs (per RJ45 port):
  • Ar: Mae cyswllt rhwydwaith dilys wedi'i sefydlu.
  • Fflachio: Mae data'n cael ei drosglwyddo neu'i dderbyn trwy'r porthladd.
  • Wedi diffodd: Nid oes cyswllt rhwydwaith wedi'i sefydlu.

6.2. Ymarferoldeb Sylfaenol

The EDS-208 is an unmanaged switch, meaning it operates automatically without requiring any configuration. It provides basic Ethernet switching functions, including:

• Newid Storio-ac-Ymlaen: Ensures data integrity by checking for errors before forwarding frames.
• Awto-negodi: Automatically determines the best speed and duplex mode for each connected device.
• Auto MDI/MDI-X: Automatically detects and adjusts for straight-through or crossover Ethernet cables.
• Broadcast Storm Protection: Helps prevent network congestion caused by excessive broadcast traffic.

7. cynnal

7.1. Glanhau

To clean the switch:

1. Disconnect power to the device.
2. Defnyddiwch frethyn meddal, sych i sychu tu allan y switsh.
3. Peidiwch â defnyddio glanhawyr hylif na glanhawyr aerosol, gan y gallant niweidio'r ddyfais.

7.2. Ystyriaethau Amgylcheddol

Ensure the switch operates within its specified temperature and humidity ranges. Avoid placing the switch in areas with excessive dust, vibration, or direct sunlight. Proper ventilation is crucial for optimal performance and longevity.

8. Datrys Problemau

9. manylebau

10. Gwarant a Chefnogaeth

10.1. Gwybodaeth Gwarant

Moxa products are covered by a limited warranty. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official Moxa websafle. Cadwch eich prawf prynu ar gyfer hawliadau gwarant.

10.2. Cymorth Technegol

If you encounter any issues that cannot be resolved using this manual, please contact Moxa technical support. You can find contact information on the official Moxa websafle (www.moxa.com) neu drwy eich dosbarthwr lleol.