1. Rhagymadrodd
This manual provides essential information for the safe and efficient operation of your Behringer NX1000 Ultra-Lightweight 1000W Class-D Power Amplifier. Please read this manual thoroughly before using the product to ensure proper setup, usage, and maintenance.
Blaen view of the Behringer NX1000 amprhyddhadwr, sioeasing its compact design and front panel controls.
2. Beth sydd yn y Bocs
Gwiriwch fod yr holl gydrannau yn bresennol wrth ddadbacio:
- Behringer NX1000 Ultra-Lightweight 1000-Watt Class-D Power Ampllewywr
- Cebl Pŵer
- Llawlyfr Cyfarwyddiadau (y ddogfen hon)
3. Nodweddion Allweddol
- Delivers 2 x 500 watts into 2 ohms; 2 x 300 watts into 4 ohms; 1000 watts into 4 ohms (Bridge mode) and weighs less than 7.3 lbs/ 3.3 kg.
- Ultimate reliability through revolutionary cool-running high-density Class-D technology with "near-zero" Thermal buildup.
- Ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption.
- Built-in stereo crossover with low-cut, high-cut and full range Mode.
- SmartSense loudspeaker Impedance compensation features fully Linear frequency response at any speaker load Impedance.
An efficiency graph illustrating the superior performance of Class-D technology compared to Class-AB, showing higher efficiency across various output power levels.
A frequency response graph demonstrating the linear output achieved by SmartSense loudspeaker impedance compensation, ensuring consistent sound quality regardless of speaker load.
4. Gosod
Proper setup is crucial for optimal performance and safety. Follow these guidelines for connecting your ampllewywr:
4.1. Mowntio Rack
The NX1000 is designed for standard 19-inch rack mounting. Secure the amplifier using appropriate rack screws through the rack ears on both sides of the unit.
Ochr profile of the Behringer NX1000 amplifier, highlighting its rack-mountable chassis.
4.2. Cysylltiadau Sain
Cysylltwch eich ffynhonnell sain (cymysgydd, cyn-gyflwynydd)amprhyddhadwr, ac ati) i'r amplifier's input jacks. The NX1000 supports both XLR and 1/4-inch TRS connectors for balanced input signals.
Connect your passive loudspeakers to the amplifier's output terminals. The NX1000 provides both speakON and binding post outputs for flexible speaker connectivity.
Manwl view of the rear panel, showing input and output connectors for audio signals and speakers.
4.3. Cysylltiad Pwer
Connect the supplied power cable to the AC inlet on the rear panel of the ampcyflenwr ac yna i allfa bŵer addas.
4.4. Canllaw Fideo Gosod
A step-by-step guide on how to set up D Series amplifiers, covering speaker connections, input sources, and mode selection for various audio configurations.
5. Gweithredu y Ampllewywr
5.1. Pweru Ymlaen / I ffwrdd
Gwasgwch y GRYM switsh ar y panel blaen i droi'r amplifier on or off. The GRYM LED will illuminate when the unit is active.
Close-up of the power button, indicating its location on the front panel.
5.2. Rheolaethau Cyfrol
Addaswch y SIANEL A a SIANEL B gain knobs on the front panel to set the desired output volume for each channel. The LCD display will show the decibel levels for precise adjustment.
5.3. Dewis Modd
On the rear panel, use the MODD newid i ddewis rhwng STEREO, PEN-Y-BONT, neu PARALLEL operation, depending on your speaker configuration requirements.
- STEREO: Each channel operates independently, providing separate left and right audio signals.
- BRIDGED: Combines the power of both channels into a single, high-power output, ideal for driving a single subwoofer.
- PARALLEL: Sends the same mono signal to both channels, useful for driving multiple speakers with identical audio.
5.4. Gosodiadau Croesfan
Utilize the built-in stereo crossover with low-cut, high-cut, and full-range modes to optimize the frequency response for your specific speakers or subwoofers.
5.5. Dangosyddion LED
The front panel features several LED indicators:
- PRO (Protect): Yn goleuo os yw'r amplifier enters protection mode due to overload, overheating, or short-circuit.
- TERFYN: Indicates that the output signal is approaching clipping. Reduce the input level to prevent distortion.
- ARWYDD: Lights up when an audio signal is present on the respective channel.
- PŴER: Yn dangos bod y amplifier yn cael ei bweru ymlaen.
5.6. Cynnyrch Drosview Fideo
Mae drosoddview video demonstrating the features and connectivity options of the D Series power amplifiers, including front panel controls, input/output configurations, and operational modes.
6. cynnal
Er mwyn sicrhau hirhoedledd a pherfformiad gorau posibl eich amplifier, follow these maintenance tips:
- Cadwch yr uned yn lân trwy ei sychu â lliain meddal, sych. Osgowch ddefnyddio glanhawyr neu doddyddion sgraffiniol.
- Sicrhau awyru digonol o amgylch y amplifier to prevent overheating. Do not block the ventilation grilles.
- Gwiriwch yr holl gysylltiadau cebl yn rheolaidd am ffit diogel ac arwyddion o draul.
7. Datrys Problemau
If you encounter issues with your Behringer NX1000 amplifer, cyfeiriwch at y problemau a'r atebion cyffredin canlynol:
- Dim allbwn sain:
- Check all audio input and output connections.
- Sicrhau y amplifier is powered on and the POWER LED is illuminated.
- Verify that input sources are active and sending a signal.
- Adjust channel gain knobs and master volume on your mixer/preamp.
- Sain ystumiedig:
- Check if the LIMIT LED is illuminated; reduce input level if it is.
- Sicrhewch fod impedans y siaradwr yn cyd-fynd â'r ampgalluoedd llifier.
- Inspect speaker cables for damage or incorrect wiring.
- Amplifier Enters Protect Mode (PRO LED illuminated):
- Trowch oddi ar y amprhyddhadwr a datgysylltwch yr holl siaradwyr.
- Check for short circuits in speaker cables or faulty speakers.
- Ensure proper ventilation to prevent overheating. Allow the unit to cool down.
- Verify that the speaker load impedance is within the amplifier's specified range (e.g., not below 2 ohms per channel).
- Sŵn Gormodol o Ffan:
- Sicrhau y amplifier has sufficient airflow and is not in an enclosed space.
- Clean any dust buildup from the fan and ventilation grilles.
8. manylebau
| Nodwedd | Manylyn |
|---|---|
| Enw Model | NX1000 |
| Allbwn Pwer (2 Ohms) | 2 x 500 Watt |
| Allbwn Pwer (4 Ohms) | 2 x 300 Watt |
| Power Output (4 Ohms Bridged) | 1000 Wat |
| Pwysau | 7.3 pwys / 3.3 kg |
| AmpDosbarth lifier | Dosbarth-D |
| Loudspeaker Impedance Compensation | SmartSense |
| Trawsgroes | Built-in stereo (low-cut, high-cut, full range) |
| Cyflenwad Pŵer | Ultra-efficient switch-mode |
| Dimensiynau Cynnyrch | 19.02 x 9.09 x 3.7 modfedd |
| Technoleg Cysylltedd | Wired |
| Modd Allbwn Sain | Stereo |
| Nifer y Cylchedau | 2 |
9. Gwarant a Chefnogaeth
The Behringer NX1000 ampdaw lifier ag a Gwarant Cyfyngedig. For detailed warranty information, product support, or service inquiries, please visit the official Behringer websafle neu cysylltwch â'u cymorth cwsmeriaid yn uniongyrchol.
Always refer to the manufacturer's official resources for the most accurate and up-to-date information regarding your product.
