Llawlyfr Defnyddiwr System Rheoli Mynediad Biometrig PNI Finger 300

1. Rhagymadrodd

The PNI Finger 300 is a robust biometric access control system designed for secure entry management. It integrates fingerprint recognition, password entry, and electromagnetic card reading capabilities to provide flexible and reliable access solutions. This manual provides essential information for the proper installation, operation, and maintenance of your device.

2. Nodweddion Cynnyrch

• Darllenydd Olion Bysedd: Supports up to 3000 fingerprint templates for secure biometric identification.
• Mynediad Cerdyn RFID: Compatible with RFID cards, supporting memory for up to 30000 cards.
• Mewnbynnu Cyfrinair: Allows access using a numerical password.
• Access Control System Connection: Designed for integration with electromagnetic locks and access buttons.
• Rhyngwynebau Cyfathrebu: Features TCP/IP and RS485 for system integration.
• Dyluniad Gwydn: IP65 protection class for enhanced durability.

3. Cynnwys Pecyn

Gwiriwch fod yr holl eitemau a restrir isod yn bresennol yn eich pecyn:

• PNI Finger 300 Identification Unit
• Ategolion Mowntio (sgriwiau, plygiau wal)
• Harnais Weirio
• Proximity Card (for testing/initial setup)

Image 3.1: PNI Finger 300 components including the main unit, mounting plate, wiring harness, and an RFID card.

4. Cynnyrch Drosview

4.1 Panel Blaen

Delwedd 4.1: Blaen view of the PNI Finger 300 showing the keypad, fingerprint scanner, and status indicators.

The front panel features a numerical keypad for password entry, a fingerprint scanner for biometric identification, and LED indicators for status feedback (e.g., access granted/denied, power status).

4.2 Rear Panel and Wiring

Delwedd 4.2: Cefn view of the PNI Finger 300 with wiring connections and product labels.

The rear panel contains the wiring terminals for power, lock control, alarm, and communication interfaces. Refer to the detailed wiring diagram in Section 5.2 for connection instructions.

5. Gosod a Gosod

5.1 Mowntio'r Dyfais

1. Choose a suitable location for installation, ensuring it is secure and protected from extreme weather conditions if outdoors.
2. Use the provided mounting plate as a template to mark drilling points on the wall.
3. Drilio tyllau a gosod plygiau wal.
4. Sicrhewch y plât mowntio i'r wal gan ddefnyddio sgriwiau.
5. Attach the PNI Finger 300 unit to the mounting plate.

5.2 Diagram Gwifrau a Chysylltiadau

Carefully connect the wires according to the diagram on the rear panel and the following descriptions:

Ensure all connections are secure and correctly matched to avoid damage to the device or connected systems. Power should only be applied after all wiring is complete.

6. Cyfarwyddiadau Gweithredu

6.1 Initial Power-Up and Admin Setup

Upon first power-up, the system will typically be in an uninitialized state. Follow the manufacturer's specific instructions (usually involving a default admin password or a master card) to enter programming mode and set up the initial administrator.

6.2 Cofrestru Defnyddwyr

To register new users, the system must be in programming mode (accessed by the administrator).

• Cofrestru Olion Bysedd: Place the user's finger on the scanner multiple times as prompted until the fingerprint is successfully enrolled.
• Cofrestru Cerdyn: Present the RFID card to the reader when prompted.
• Password Registration: Enter the desired numerical password using the keypad and confirm.

6.3 Cyrchu'r System

Once users are registered, they can gain access using their assigned method:

• Olion Bysedd: Place a registered finger on the scanner.
• Cerdyn: Present a registered RFID card to the reader.
• Cyfrinair: Enter the registered password using the keypad, followed by the '#' key (or as specified by system configuration).

A successful access attempt will typically be indicated by a green LED and an audible signal, followed by the unlocking of the connected door.

7. cynnal

• Glanhau: Regularly clean the fingerprint scanner and keypad with a soft, dry cloth. Avoid abrasive cleaners or solvents.
• Diogelu'r Amgylchedd: Ensure the device is protected from direct water exposure and extreme temperatures, even with its IP65 rating, to prolong its lifespan.
• Diweddariadau Cadarnwedd: Check the PNI website periodically for any available firmware updates to ensure optimal performance and security.

8. Datrys Problemau

• Dyfais Ddim yn Pweru Ymlaen: Verify the 12V DC power supply connection and ensure the power source is active. Check wiring for shorts or disconnections.
• Access Denied (Registered User): Ensure the fingerprint is placed correctly on the scanner, the card is presented properly, or the password is entered accurately. Re-enroll the user if issues persist.
• Door Not Unlocking: Check the wiring to the electromagnetic lock. Ensure the lock itself is functioning correctly and receiving power. Verify the system's lock release settings.
• Bysellfwrdd yn Anymatebol: Check for physical damage or debris. If the issue persists, a system reset or professional inspection may be required.

9. manylebau

10. Gwarant a Chefnogaeth

For warranty information, technical support, or service inquiries, please refer to the official PNI website or contact your authorized dealer. You can also visit the Siop PNI ar Amazon am wybodaeth ychwanegol am gynhyrchion ac adnoddau cymorth.