DIRECTV RC73, 4336303112

Llawlyfr Defnyddiwr Rheolydd o Bell IR/RF DIRECTV RC73

Model: RC73, 4336303112

Cynnyrch Drosview

The DIRECTV RC73 IR/RF Remote Control is designed for seamless control of your DIRECTV Genie system and other compatible devices. It features both Infrared (IR) and Radio Frequency (RF) technologies, allowing for flexible operation without needing to point the remote directly at the receiver when in RF mode. This remote offers a streamlined layout with essential buttons for navigating your entertainment.

Two DIRECTV RC73 remote controls side-by-side.

Image: Two DIRECTV RC73 remote controls, showcasing their black and white design and button layout.

Gosod

1. Gosod Batri

Your DIRECTV RC73 remote control requires two AA batteries for operation. These batteries are typically included with your purchase.

  1. Lleolwch y clawr compartment batri ar gefn y teclyn rheoli o bell.
  2. Slide the cover downwards or press the release tab (if present) and lift the cover off.
  3. Insert two AA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the indicators inside the compartment.
  4. Rhowch glawr adran y batri yn ôl, gan ei lithro'n ôl i'w le nes ei fod yn clicio'n ddiogel.
Two DIRECTV RC73 remotes with included AA batteries and a Genie Remote Guide.

Image: Two DIRECTV RC73 remote controls shown with two AA batteries and a small instruction guide, illustrating the contents of the package.

2. Pairing the Remote to Your DIRECTV Genie Receiver (RF Mode)

To enable RF (Radio Frequency) control, allowing you to operate your receiver without direct line-of-sight, follow these steps:

  1. Point the remote at your DIRECTV receiver.
  2. Pwyswch a daliwch y MUTE botwm a'r DETHOL button on the remote for approximately 5 seconds.
  3. Release the buttons when the green light on the remote blinks twice.
  4. Using the number pad on the remote, enter the code 961.
  5. Gwasgwch y SIANEL I FYNY botwm unwaith.
  6. Gwasgwch y ENWCH button (located below the number pad).
  7. Observe your TV screen. A message should appear indicating "Applying RF/IR Setup. Please Wait..." followed by "Your Remote is now setup for RF."
  8. Gwasgwch y DETHOL (OK) button on the remote to confirm.

3. Programming the Remote to Your TV (Volume Control)

To control your TV's volume and power with the RC73 remote, you need to program it to your television. This process typically involves selecting your TV's brand from the receiver's menu.

  1. Gwasgwch y BWYDLEN button on your DIRECTV remote.
  2. Navigate down using the SIANEL I LAWR button to find and select Gosodiadau.
  3. Once in Settings, use the directional arrows to navigate to the right until you find and select Rheolaeth Anghysbell.
  4. From the Remote Control Setup menu, select Pâr / Rhaglen o Bell.
  5. Dewiswch Program Audio Device.
  6. You will be prompted to select your TV's brand. Use the keypad or navigate through the list to find your brand (e.g., Samsung). If you don't know the specific model, select "I don't know my model" if available.
  7. Follow the on-screen prompts to test the code. This usually involves pressing the GRYM button on the remote to see if your TV turns off.
  8. If the TV turns off, select "It Worked" to confirm the programming. If not, select "Try Next Code" and repeat the test until a working code is found.

Cyfarwyddiadau Gweithredu

The DIRECTV RC73 remote control features a user-friendly layout for intuitive navigation and control of your DIRECTV system and connected devices.

Detailed diagram of the DIRECTV RC73 remote control with labels for each button's function.

Image: A detailed diagram of the RC73 remote, illustrating the function of each button for comprehensive control.

Swyddogaethau Botwm Allweddol
BotwmSwyddogaeth
ON/OFF (RC73)Turns both DIRECTV Receiver and TV ON or OFF at the same time. (Remote must be programmed for TV; HD DVR still records when off.)
CYFARWYDDPress once for On-Screen Guide. Press twice for programming grouped into categories.
BWYDLENAccesses the main menu for settings, recordings, and more.
RHESTRDisplays the LIST of your recorded programs.
EXITExits the current menu and returns to the previous channel viewgol.
DETHOLSelects the item highlighted on screen.
GWYBODAETHDisplays INFORMATION about the program now playing or highlighted in the On-Screen Guide.
VOL (Cyfrol)Adjusts the volume of your TV or audio device (if programmed).
CH (Sianel)Yn newid y sianel i fyny neu i lawr.
PREVReturns to the PREVIOUS channel viewgol.
RECORD (Red Circle)Records the program now playing or highlighted in the On-Screen Guide. Press twice to record the entire series.
MUTEYn tewi'r sain.
AILCHWARAEReplays the previous six seconds.
AILWINRewinds at increasing speeds—press up to four times.
CHWARAE/SEIBIANTPlays the current program. Press once while the program is playing to PAUSE.
DASH (-)Press for Guide Options while viewing On-Screen Guide. Press for playlist options while viewing playlist. Press to display last 6 digits of receiver ID, satellite signal type (SWiM or Multiswitch) and Internet status.
UWCHRADDAdvances 30 seconds. Press and hold to jump ahead to the end of a recorded program.
CYFLYM-YMLAENFast-forwards at increasing speeds—press up to four times.
ENTER (Input)Press for Mini Guide while viewing your program and dismiss with EXIT. ENTER also replaces TV INPUT button: to cycle through the equipment connected to your TV, press and hold for three seconds until LED light at top turns green. Then scroll through inputs by pressing ENTER again.

Cynnal a chadw

Amnewid Batri

When the remote's performance degrades or the green light no longer blinks during operation, it's time to replace the batteries. Always use two new AA batteries for optimal performance.

  1. Remove the battery compartment cover as described in the Setup section.
  2. Tynnwch yr hen fatris.
  3. Insert two new AA batteries, observing the correct polarity (+/-).
  4. Amnewid y clawr compartment batri.

Glanhau

To maintain the remote's appearance and functionality, periodically wipe it with a soft, dry cloth. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the remote's surface or internal components.

Datrys problemau

Materion Cyffredin ac Atebion
MaterAchos PosiblAteb
Remote not responding to receiver.Low or dead batteries; Remote not paired in RF mode; Obstruction between remote and receiver (if in IR mode).Replace batteries. Ensure remote is paired in RF mode (refer to Setup section). Remove any obstructions.
Volume or TV power buttons not working.Remote not programmed to TV.Program the remote to your TV (refer to Setup section, "Programming the Remote to Your TV").
Green light on remote blinks slowly or not at all.Pŵer batri isel.Amnewid batris ar unwaith.
Remote controls receiver but not client device (e.g., Genie Mini).Client device not properly paired or connected.Ensure the client device is correctly connected and powered on. Re-pair the remote with the client device if necessary (consult your Genie Mini's specific instructions).

Manylebau

Gwarant a Chefnogaeth

For specific warranty information regarding your DIRECTV RC73 remote control, please refer to the documentation included with your original purchase or visit the official DIRECTV websafle. Gall telerau ac amodau'r warant amrywio.

For technical support, troubleshooting assistance beyond this manual, or to inquire about replacement parts, please contact DIRECTV customer service directly. Contact information can typically be found on your DIRECTV bill, their official website, or through your service provider.

Adnoddau Ar-lein:

Dogfennau Cysylltiedig - RC73, 4336303112

Cynview DIRECTV Genie and Universal Remote Control Guide
A comprehensive guide to understanding the functions of DIRECTV Genie and Universal remotes, including detailed button explanations and programming instructions for various DIRECTV receivers and TVs.
Cynview DIRECTV Universal Remote Control Guide: Getting Started and Programming
Learn how to use your DIRECTV universal remote control, understand button functions, and program your RC73 remote for business accounts. Includes setup instructions and features.
Cynview Canllaw Gosod ac Actifadu DIRECTV Wireless Genie Mini
Cyfarwyddiadau cam wrth gam ar gyfer cysylltu, sefydlu, actifadu a rhaglennu eich DIRECTV Wireless Genie Mini newydd ar gyfer adloniant fideo di-dor.
Cynview Cyfarwyddiadau Actifadu Gweinydd DIRECTV Genie 2 a Dychwelyd Offer
Canllaw cam wrth gam ar gyfer actifadu eich Gweinydd DIRECTV Genie 2 newydd a dychwelyd eich hen offer er mwyn osgoi ffioedd am beidio â dychwelyd. Yn cynnwys gweithdrefnau sefydlu, paru a dychwelyd.
Cynview Llawlyfr Cynnyrch DIRECTV Genie 2 - Nodweddion, Manylebau, a Gwybodaeth Diogelwch
Llawlyfr cynnyrch cynhwysfawr ar gyfer derbynnydd lloeren DIRECTV Genie 2, yn cwmpasu manylion caledwedd, nodweddion, datrys problemau, dangosyddion LED, rhagofalon diogelwch, a gwybodaeth am warant. Yn cynnwys canllawiau gosod a gweithredu.
Cynview Canllaw Gosod DIRECTV Wireless Genie Mini C41W
Canllaw cam wrth gam i osod a chysylltu'r DIRECTV Wireless Genie Mini (Model C41W) â'ch DVR Genie HD ar gyfer adloniant cartref gwell.