VonHaus 600W Corded 2-in-1 Stick Vacuum Cleaner Instruction Manual

1. Gwybodaeth Bwysig am Ddiogelwch

Please read all instructions carefully before using your VonHaus 600W Corded 2-in-1 Stick Vacuum Cleaner. Retain this manual for future reference.

• Always ensure the appliance is unplugged from the power supply before assembling, disassembling, or cleaning.
• Do not use the appliance on wet surfaces or to pick up liquids.
• Cadwch wallt, dillad rhydd, bysedd, a phob rhan o'r corff i ffwrdd o agoriadau a rhannau symudol.
• Peidiwch â chodi unrhyw beth sy'n llosgi neu'n ysmygu, fel sigaréts, matsys, neu lwch poeth.
• Defnyddiwch fel y disgrifir yn y llawlyfr hwn yn unig. Defnyddiwch atodiadau a argymhellir gan y gwneuthurwr yn unig.
• Peidiwch â defnyddio heb gwpan llwch a/neu hidlwyr yn eu lle.
• Os caiff y llinyn cyflenwi ei ddifrodi, rhaid i'r gwneuthurwr, ei asiant gwasanaeth, neu bersonau â chymwysterau tebyg gael ei ddisodli er mwyn osgoi perygl.

2. Cynnwys Pecyn

Gwiriwch fod yr holl gydrannau yn bresennol ac mewn cyflwr da:

• Prif Uned Gwactod
• Trin Estynadwy
• Pen Brws Llawr
• Offeryn Agen
• Ymlyniad Brws
• Hidlydd HEPA (wedi'i osod ymlaen llaw)
• Sponge Filter (pre-installed)

Figure 2.1: Included accessories for versatile cleaning.

3. Gosod a Chynulliad

Your VonHaus vacuum can be assembled in two configurations: upright stick vacuum or handheld vacuum.

3.1 Upright Stick Vacuum Assembly

1. Atodwch yr handlen: Insert the extendable handle into the main vacuum unit until it clicks securely into place.
2. Atodwch Ben y Brwsh Llawr: Connect the floor brush head to the main vacuum unit. Ensure it is firmly attached.
3. Cysylltiad Pwer: Plygiwch y llinyn pŵer i mewn i allfa drydanol addas.

Figure 3.1: The VonHaus 2-in-1 Stick Vacuum Cleaner in its two primary configurations.

3.2 Handheld Vacuum Assembly

1. Detach Handle and Floor Head: If assembled as an upright vacuum, press the release buttons to detach the extendable handle and the floor brush head from the main unit.
2. Atodwch Ategolion: Select the desired accessory (crevice tool or brush attachment) and firmly attach it to the main vacuum unit.
3. Cysylltiad Pwer: Plygiwch y llinyn pŵer i mewn i allfa drydanol addas.

Figure 3.2: Handheld configuration for detailed cleaning tasks.

3.3 Visual Setup Guide

For a visual demonstration of the assembly process, please refer to the video below:

4. Cyfarwyddiadau Gweithredu

Once assembled and plugged in, your vacuum is ready for use.

1. Pŵer ymlaen / i ffwrdd: Locate the power switch on the main unit and slide it to the 'On' position to start vacuuming. Slide to 'Off' to stop.
2. Upright Mode: Use the extendable handle and floor brush head for cleaning carpets, hard floors, and tiles. The lightweight design (approximately 0.01 ounces) allows for easy maneuverability.
3. Modd Llaw: For smaller messes, upholstery, car interiors, or hard-to-reach areas, use the main unit with the appropriate attachment.
4. Defnyddio Atodiadau: The crevice tool is ideal for tight spaces and corners. The brush attachment is suitable for delicate surfaces and upholstery.

Figure 4.1: Effective cleaning of hard floors using the upright stick vacuum.

5. cynnal

Mae cynnal a chadw rheolaidd yn sicrhau perfformiad gorau posibl ac yn ymestyn oes eich sugnwr llwch.

5.1 Gwagio'r Cwpan Llwch

Empty the dust cup regularly, ideally after each use, to maintain strong suction power.

1. Detach Dust Cup: Hold the main vacuum unit and press the dust cup release button. Gently pull the dust cup away from the main unit.
2. Remove Cyclone Separator: Over a waste bin, gently pull out the cyclone separator from the dust cup.
3. Cynnwys Gwag: Tip the dust cup to empty all collected debris into the waste bin.
4. Ailosod: Reinsert the cyclone separator, ensuring it aligns correctly. Reattach the dust cup to the main unit until it clicks securely.

Figure 5.1: The 1.3L dust tank and HEPA sponge filtration system.

5.2 Glanhau'r Hidlydd HEPA

The washable HEPA filtration system helps trap small particles. Clean the filter periodically.

1. Dileu'r Hidlydd: After detaching the dust cup, carefully remove the HEPA filter.
2. Shake Off Debris: Gently shake the filter over a waste bin to remove loose dirt and debris.
3. Golchi Hidlydd: Rinse the filter under running water until clean. Do not use detergents or hot water.
4. Sych yn llwyr: Allow the filter to air dry completely in a well-ventilated area before reinserting it. Ensure it is completely dry to prevent mold or damage.
5. Ail-osod Hidlydd: Place the dry filter back into the vacuum, ensuring it is securely sealed.

5.3 Visual Maintenance Guide

For a visual demonstration of emptying the dust cup and washing the filter, please refer to the video below:

6. Datrys Problemau

Os byddwch chi'n dod ar draws problemau gyda'ch sugnwr llwch, cyfeiriwch at y camau datrys problemau cyffredin canlynol:

• Dim pŵer:
  • Sicrhewch fod y llinyn pŵer wedi'i blygio'n ddiogel i mewn i allfa weithio.
  • Check the power switch is in the 'On' position.
• Colli Sugno:
  • Gwagiwch y cwpan llwch.
  • Clean or replace the HEPA and sponge filters.
  • Check for blockages in the nozzle, hose, or extension tube.
• Sŵn Anarferol:
  • Check for any foreign objects caught in the floor brush head or main unit.
  • Gwnewch yn siŵr bod yr holl rannau wedi'u cydosod yn gywir ac wedi'u clymu'n ddiogel.

If problems persist after attempting these steps, please contact VonHaus customer support.

7. manylebau

8. Gwarant a Chefnogaeth

For warranty information, product registration, or technical support, please refer to the documentation included with your purchase or visit the official VonHaus websafle. Cadwch eich prawf prynu ar gyfer unrhyw hawliadau gwarant.

For additional assistance, you may contact VonHaus customer service directly.