Llawlyfr Defnyddiwr Dron RC Quadcopter TOZO Q1012 X8tw

1. Rhagymadrodd

This manual provides detailed instructions for the safe operation and maintenance of your TOZO Q1012 X8tw RC Quadcopter. Please read this manual thoroughly before operating the drone to ensure proper function and to prevent damage or injury.

Image: The TOZO Q1012 X8tw drone, black in color, with its four propellers extended, viewed from above. The drone features a sleek design with a white stripe down the center.

2. Cynnwys Pecyn

Gwiriwch fod yr holl eitemau a restrir isod yn bresennol yn eich pecyn:

Delwedd: Drosoddiadview of the TOZO Q1012 X8tw drone's package contents, including the drone, remote transmitter, screws, battery, USB charging cable, spare propellers, screwdriver, phone holder, and the operation manual.

• TOZO Q1012 X8tw RC Quadcopter
• Trosglwyddydd o Bell
• Rechargeable Drone Battery
• Cebl Codi Tâl USB
• Propelwyr Sbâr (set o 4)
• Sgriwdreifer
• Phone Holder for Transmitter
• Llawlyfr Cyfarwyddiadau
• Screws (for propeller attachment)

3. Nodweddion Cynnyrch

• Dylunio Plygadwy: The drone arms can be folded for compact storage and portability.

  Image: Demonstrates the foldable design of the TOZO Q1012 X8tw drone, showing both its compact folded state (122x94x57mm) and its unfolded state (343x313x91mm) with propellers extended.
• Dal Uchder: Maintains a consistent altitude, simplifying flight control.
• Modd Di-ben: Eliminates the need to adjust the drone's position before flight, as the forward direction is relative to the pilot.

  Image: Illustrates the Headless Mode feature of the TOZO Q1012 X8tw drone, showing directional arrows indicating that the drone will move relative to the controller's orientation, regardless of the drone's front-facing direction.

• FPV (First Person View) with WiFi 720P HD Camera: Stream live video to your smartphone via WiFi.
• 6-Axis Gyro: Provides stable flight and easy control.
• 3D 360-Degree Flips: Perfformiwch styntiau awyr gydag un botwm.
• 2.4Ghz 4-Channel Control: Ensures strong signal and precise control.

4. Canllawiau Diogelwch

• Gweithredwch y drôn mewn mannau agored, i ffwrdd o bobl, anifeiliaid a rhwystrau.
• Do not fly near airports or restricted airspace.
• Osgowch hedfan mewn gwyntoedd cryfion neu amodau tywydd garw.
• Cadwch fysedd a gwallt i ffwrdd o bropelorau sy'n cylchdroi.
• Sicrhewch fod y batri wedi'i wefru'n llawn cyn pob hediad.
• Supervise children during drone operation.
• Peidiwch ag addasu'r drôn na'i gydrannau.

5. Gosod

5.1 Cynulliad Drôn

1. Unfold the Arms: Gently extend the four arms of the drone until they lock into position. Refer to the foldable design image in Section 3.
2. Gosod Propellers: Attach the propellers to the motor shafts, ensuring correct orientation (A and B propellers are typically marked and correspond to specific motor positions). Secure with screws if necessary.
3. Install Landing Gear: Attach the landing gear to the bottom of the drone.

5.2 Gosod a Gwefru Batri

1. Charge Drone Battery: Connect the drone battery to the USB charging cable, then plug the USB cable into a USB power source (e.g., computer, USB wall adapter). The indicator light will show charging status and turn off when fully charged.
2. Install Drone Battery: Open the battery compartment on the drone and insert the fully charged battery. Connect the battery connector to the drone's power port. Close the compartment securely.
3. Gosod Batris y Trosglwyddydd: Open the battery compartment on the remote transmitter and insert 4x AAA batteries (not included), observing polarity. Close the compartment.

5.3 Trosglwyddydd Drosview

Image: A detailed diagram of the TOZO Q1012 X8tw drone's remote transmitter, labeling various controls such as the LCD display, accelerator/left and right rotatory rocker, front rear left and right rocker, fine-tuning buttons, power switch, light switch, speed toggle, and automatic landing/emergency stop buttons.

• Arddangosfa LCD: Shows flight information.
• Left Stick (Accelerator/Left & Right Rotatory Rocker): Yn rheoli uchder (i fyny/i lawr) a chylchdro (chwith/dde).
• Right Stick (Front Rear Left & Right Rocker): Yn rheoli symudiad ymlaen/yn ôl a chwith/dde.
• Fine Tuning Buttons: Adjust drone drift for stable flight.
• Newid Pwer: Yn troi'r trosglwyddydd ymlaen / i ffwrdd.
• Switsh Golau: Controls drone LED lights.
• High/Intermediate/Low Speed Toggle: Changes flight speed.
• Automatic Landing Button: Press and hold for 2 seconds to initiate automatic landing.
• Stopio Argyfwng: Press both bottom buttons simultaneously for emergency stop.

6. Cyfarwyddiadau Gweithredu

6.1 Pairing the Drone and Transmitter

1. Rhowch y drôn ar arwyneb gwastad, gwastad.
2. Trowch switsh pŵer y drôn ymlaen. Bydd goleuadau dangosydd y drôn yn fflachio.
3. Turn on the transmitter's power switch.
4. Push the left throttle stick (accelerator) fully up, then pull it fully down. The drone lights will stop flashing and remain solid, indicating successful pairing.

6.2 Graddnodi

After pairing, perform a gyroscope calibration for stable flight:

1. Ensure the drone is on a flat surface.
2. Push both control sticks down and to the right simultaneously (as shown in step 3 of the "How to Take Off" image). The drone lights will flash rapidly and then become solid, indicating successful calibration.

6.3 How to Take Off

Image: A six-step visual guide demonstrating the take-off procedure for the TOZO Q1012 X8tw drone, including pushing the throttle up and down for pairing, calibrating by pushing both sticks down-right, unlocking by pushing both sticks down-left, and finally pushing the left stick up to take off.

1. Paru: Push the throttle lever up (1), then down (2).
2. graddnodi: Push both control sticks down and to the right (3).
3. Datgloi: Push both control sticks down and to the left (4). The propellers will start spinning slowly.
4. Tynnu i ffwrdd: Push the left throttle stick up to ascend (6).

6.4 Rheoli Hedfan

• Esgyn / Disgyn: Use the left stick (throttle) up or down.
• Ymlaen / Yn ôl: Use the right stick up or down.
• Trowch i'r Chwith/Dde (Yaw): Use the left stick left or right.
• Fly Left/Right (Roll): Use the right stick left or right.
• Dal Uchder: Once the drone reaches a desired altitude, release the left stick, and the drone will attempt to maintain that height.
• Modd Di-ben: Press the Headless Mode button (refer to transmitter diagram). The drone will orient itself relative to the pilot, regardless of its front direction. Press again to exit.
• Fflipiau 360 Gradd: Press the 3D Flip button, then push the right stick in the desired flip direction.

6.5 Glanio

• Glanio â llaw: Slowly pull the left throttle stick down until the drone lands.
• Glanio Awtomatig: Press and hold the automatic landing button on the transmitter for 2 seconds. The drone will descend and land automatically.

6.6 FPV and Camera Operation (via Phone WiFi Direct Control)

Image: Displays two methods of controlling the TOZO Q1012 X8tw drone: via the included transmitter with a phone monitor attached, or directly via phone WiFi control using a compatible iOS/Android app. It also notes that data is stored directly on the phone, eliminating the need for a TF card.

1. Ap Lawrlwytho: Chwiliwch am the official TOZO drone app on your smartphone's app store (iOS/Android).
2. Connect to Drone WiFi: Turn on the drone. On your smartphone, go to WiFi settings and connect to the drone's WiFi network (e.g., "TOZO-Q1012-XXXX").
3. Lansio Ap: Open the TOZO drone app. You should see a live FPV feed from the drone's camera.
4. Record Video/Take Photos: Use the controls within the app to start/stop video recording or take still photos. Captured media is stored directly on your phone.

7. cynnal

• Glanhau: Defnyddiwch frethyn meddal, sych i lanhau corff y drôn a lens y camera. Peidiwch â defnyddio cemegau llym na thoddyddion.
• Amnewid Propelor: If a propeller is damaged, replace it with a new one from the spare parts. Ensure the correct propeller type (A or B) is installed on the corresponding motor.
• Gofal Batri: Store batteries in a cool, dry place. Do not overcharge or over-discharge.
• Storio: When not in use for extended periods, remove batteries from both the drone and transmitter. Store the drone in a cool, dry environment.

8. Datrys Problemau

• Drone not responding to transmitter:
  • Ensure both drone and transmitter are powered on.
  • Re-pair the drone and transmitter (Section 6.1).
  • Gwiriwch fatris y trosglwyddydd.
• Drone unstable during flight/drifting:
  • Perform gyroscope calibration (Section 6.2).
  • Use the fine-tuning buttons on the transmitter to correct drift.
  • Check for damaged propellers and replace if necessary.
• No FPV feed on smartphone:
  • Ensure the drone's WiFi is enabled and your phone is connected to it.
  • Restart the drone and the app.
  • Check app permissions on your phone.
• Amser hedfan byr:
  • Gwnewch yn siŵr bod batri'r drôn wedi'i wefru'n llawn.
  • Battery life may decrease over time; consider replacing old batteries.

9. manylebau

10. Gwarant a Chefnogaeth

TOZO products come with a standard warranty. For detailed warranty information, technical support, or replacement parts, please visit the official TOZO websafle neu cysylltwch â'u gwasanaeth cwsmeriaid yn uniongyrchol.

Official TOZO Store: Visit the TOZO Store on Amazon