Everbilt 1-1/2 Hp Thermoplastic Sprinkler Pump User Manual

1. Rhagymadrodd

This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Everbilt 1-1/2 Hp Thermoplastic Sprinkler Pump. This high-capacity pump is engineered to boost water pressure from city water sources or draw water from lakes and streams for various sprinkling and irrigation applications. It features a robust 1-1/2 HP dual voltage motor and a corrosion-resistant thermoplastic construction, ensuring durability and reliable performance. The pump is self-priming after its initial fill with water, simplifying setup.

Image 1.1: The Everbilt 1-1/2 Hp Thermoplastic Sprinkler Pump, showcasing its compact design and durable thermoplastic housing.

2. Gwybodaeth Diogelwch

Read and understand all safety warnings and instructions before installing or operating this pump. Failure to follow these instructions can result in electric shock, fire, serious injury, or death.

• Diogelwch Trydanol: Always disconnect power before servicing the pump. Ensure the pump is properly grounded. All electrical wiring should be performed by a qualified electrician and comply with local codes. Do not operate the pump with a damaged cord or plug.
• Diogelwch Dŵr: Never run the pump dry, as this can cause severe damage. Protect the pump and plumbing from freezing temperatures to prevent cracking and leaks.
• Diogelwch Cyffredinol: Wear safety glasses when working with the pump. Keep children and unauthorized persons away from the operating area. Do not use this pump for flammable or corrosive liquids.

3. Cynnwys Pecyn

Wrth ddadbacio, gwiriwch fod yr holl gydrannau yn bresennol ac yn ddi-ddifrod. Dylai'r pecyn gynnwys:

• Everbilt 1-1/2 Hp Thermoplastic Sprinkler Pump (1 unit)
• Llawlyfr Defnyddiwr (y ddogfen hon)

4. Gosod

Proper installation is crucial for the pump's performance and longevity.

4.1 Lleoliad

• Install the pump on a firm, level surface to minimize vibration.
• Choose a location that is protected from direct sunlight, rain, and freezing temperatures.
• Ensure adequate ventilation around the motor for cooling.

4.2 Piping Connections

• Use appropriate pipe sizes for the inlet and outlet to ensure optimal flow and prevent cavitation.
• Apply thread sealant to all pipe connections to prevent air leaks, especially on the suction side.
• Install a foot valve with a strainer on the end of the suction line if drawing water from a lake or stream to prevent debris from entering the pump and to maintain prime.
• Install a check valve on the discharge side if necessary to prevent backflow.

4.3 Cysylltiad Trydanol

• The pump features a dual voltage motor (115V or 230V). Ensure the motor is wired for the correct voltage supply available. Refer to the motor's wiring diagram for specific instructions.
• Connect the pump to a dedicated, properly fused electrical circuit.
• Sicrhewch fod y pwmp wedi'i seilio'n iawn i atal peryglon sioc drydanol.

4.4 Preimio'r Pwmp

Before initial operation, the pump must be primed:

1. Remove the priming plug located on top of the pump casing.
2. Fill the pump casing completely with water until it overflows.
3. Replace the priming plug securely.
4. Ensure all valves on the suction and discharge lines are open.

5. Cyfarwyddiadau Gweithredu

Ar ôl ei osod a'i baratoi, mae'r pwmp yn barod i'w weithredu.

5.1 Dechrau'r Pwmp

1. Verify that all connections are tight and there are no visible leaks.
2. Ensure the suction line is submerged in water (if drawing from a source) and the discharge line is open.
3. Turn on the electrical power to the pump. The pump should start and begin moving water.
4. Monitor the pump for the first few minutes of operation for any unusual noises or vibrations.

5.2 Stopio'r Pwmp

To stop the pump, simply turn off the electrical power supply.

6. cynnal

Mae cynnal a chadw rheolaidd yn sicrhau perfformiad gorau posibl ac yn ymestyn oes eich pwmp.

6.1 Gwiriadau Rheolaidd

• Periodically inspect the pump and piping for any signs of leaks, corrosion, or damage.
• Clean any debris from the suction strainer (if applicable) to maintain proper flow.
• Ensure the motor's ventilation openings are clear of obstructions.

6.2 Winterization (for cold climates)

If the pump will be exposed to freezing temperatures, it must be drained to prevent damage:

1. Datgysylltu pŵer i'r pwmp.
2. Remove the drain plug(s) from the pump casing and any low points in the piping system.
3. Gadewch i'r holl ddŵr ddraenio'n llwyr.
4. Store the pump in a dry, protected area if possible, or ensure all plugs are reinstalled loosely to allow for air circulation.

7. Datrys Problemau

Mae'r adran hon yn darparu atebion i broblemau cyffredin y gallech ddod ar eu traws.

8. manylebau

Technical details for the Everbilt 1-1/2 Hp Thermoplastic Sprinkler Pump.

• Gwneuthurwr: Bythol
• Rhif Model: EFLS15-HD
• Rhif Rhan: EFLS15-HD
• Lliw: Du
• Arddull: Uwchben y Ddaear
• Deunydd: Plastig, Polypropylen (PP)
• Math o ffynhonnell pŵer: AC/DC
• Cyftage: 115 Volts (AC) / 230 Volts (AC) (Dual Voltage)
• Ceffylau: 1-1/2 HP
• Capasiti Pwmpio: Up to 4020 GPH (Gallons Per Hour)
• Maximum Lifting Height (Suction Depth): Hyd at 20 troedfedd
• Swm Pecyn Eitem: 1
• Pwysau Eitem: 19.5 kg
• Dimensiynau Cynnyrch: 76.2 x 40.64 x 40.64 cm (Hyd x Lled x Uchder)
• UPC: 856594003961
• Dyddiad Ar Gael Cyntaf: 22 Mehefin 2015

9. Gwarant a Chefnogaeth

For warranty information, technical support, or replacement parts, please contact Everbilt customer service. Keep your purchase receipt as proof of purchase for any warranty claims. Detailed contact information can typically be found on the product packaging or the official Everbilt websafle.