Extech MS6100 2-Channel Digital Oscilloscope User Manual

1. Rhagymadrodd

This manual provides comprehensive instructions for the safe and effective operation of the Extech MS6100 2-Channel Digital Oscilloscope. The MS6100 is a versatile instrument designed for precise electrical testing and measurement, combining the functionalities of a digital oscilloscope and a TRMS multimeter.

Key features include a 5.6-inch color LCD, high sampling rate, extensive record length, and various measurement capabilities. Please read this manual thoroughly before using the device to ensure proper handling and to maximize its performance.

2. Gwybodaeth Diogelwch

WARNING: To avoid electric shock or personal injury, read the safety information carefully before using the product.

• Always use the instrument with the specified probes and accessories.
• Do not use the instrument if it appears damaged or if it is not operating properly.
• Observe all local and national safety codes.
• Ensure the power adapter is correctly rated for your local power supply.
• Peidiwch â gwneud yr offeryn yn agored i law neu leithder.
• Cyfeirio pob gwasanaeth i bersonél gwasanaeth cymwys.

3. Cynnyrch Drosview

The Extech MS6100 integrates a powerful 2-channel digital oscilloscope with a full-featured TRMS multimeter, offering a compact and robust solution for field and bench measurements.

3.1 Prif Nodweddion

• 100MHz Bandwidth for precise signal analysis.
• 5.6" (142mm) color LCD display for clear waveform visualization.
• 500MS/s sampling rate per channel for detailed signal capture.
• 1M point record length per channel for extended waveform recording.
• Built-in TRMS MultiMeter with 6000 count display and analog bargraph.
• One-touch automatic setup for optimized display.
• 23 Automatic Measurements.
• Waveform Math functions (Add, Subtract, Multiply, Divide).
• Automatic cursor tracking measurements.
• XY Mode for phase relationship analysis.
• Built-in FFT function for frequency domain analysis.
• Storage and recall of up to 1000 waveform screens and setups on 2G microSD card.
• Waveform Recorder for capturing/replaying input waveforms.

3.2 Instrument Layout

Ffigur 3.1: Blaen view of the Extech MS6100 Digital Oscilloscope, showing the color LCD display, function buttons (F1-F5), navigation controls, input terminals (10A, FUSED/MAX 0.6A, mA, COM, V/Ω/C, CAT II 600V), and dedicated buttons for oscilloscope and multimeter functions.

The front panel features a large color LCD for displaying waveforms and measurement data. Below the screen are five function buttons (F1-F5) whose labels change dynamically on the screen. The main control area includes dedicated buttons for voltage (V), current (A), resistance (Ω), diode test, continuity, save/recall, utility, cursor, measure, and menu navigation. Input terminals for oscilloscope channels (CH1, CH2) and multimeter functions are located at the bottom, along with the power button and auto-setup button.

4. Gosod a Gweithrediad Cychwynnol

4.1 Dadbacio ac Archwilio

Carefully unpack the instrument and verify that all items are present and undamaged. The package should include:

• Extech MS6100 Digital Oscilloscope
• Two 1X/10X oscilloscope probes
• Test leads for multimeter functions
• Windows® compatible software and USB cable
• Universal AC adaptor/charger
• Cario achos
• MicroSD card (2G, installed)

4.2 Gosod a Gwefru Batri

The MS6100 is powered by one Lithium Ion battery (included and pre-installed). Ensure the battery is fully charged before first use. Connect the universal AC adaptor/charger to the instrument's charging port and to a suitable AC power outlet. The charging indicator will show the charging status.

4.3 Pweru Ymlaen/Diffodd

I droi’r ddyfais ymlaen, pwyswch a daliwch y Grym button (orange circle with power symbol) located at the bottom left of the control panel. To power off, press and hold the same button until the display shuts down.

4.4 Gosodiad Cychwynnol

Upon first power-on, the device may prompt for language selection or other initial settings. Use the navigation buttons and F-buttons to configure as needed. The built-in multi-language help system can be accessed via the pop-up menu.

5. Cyfarwyddiadau Gweithredu

5.1 Modd Osgilosgop

To enter Oscilloscope mode, press the OSC DMM button. The display will show the waveform grid and channel information.

• Cysylltu Probau: Connect the oscilloscope probes to the CH1 and CH2 BNC inputs. Ensure the probe attenuation setting (1X/10X) matches the setting on the oscilloscope.
• Gosodiad awtomatig: For quick waveform display, press the AWTO button (bottom right). This optimizes position, range, timebase, and triggering.
• Vertical Controls (VOLTS): Defnyddiwch y GWIRFODDOLION buttons for CH1 and CH2 to adjust the vertical scale (Volts/Div). Use the associated up/down arrows to adjust vertical position.
• Horizontal Controls (TIME/DIV): Defnyddiwch y AMSER / DIV buttons to adjust the horizontal scale (Time/Div). Use the associated left/right arrows to adjust horizontal position.
• Sbardun: Defnyddiwch y YSBRYD button and associated controls to set the trigger level and mode for stable waveform capture.
• Mesuriadau: Gwasgwch y MESUR button to access automatic measurements (e.g., frequency, peak-to-peak voltaga).
• Cyrchyddion: Gwasgwch y CYRCHWR button to enable and position horizontal and vertical cursors for manual measurements.
• Waveform Math: Access Add, Subtract, Multiply, and Divide functions via the BWYDLEN YMLAEN/DIFFODD button and navigating to the Math menu.
• FFT Function: Convert time-domain signals to frequency components using the FFT function, accessible through the menu.
• Modd XY: For displaying phase relationships between two signals, select XY Mode from the menu.

5.2 Modd Amlfesurydd

To switch to Multimeter mode, press the OSC DMM button again. The display will show multimeter readings.

• Cysylltu Gwifrau Prawf: Connect the red test lead to the V/Ω/C or mA terminal and the black test lead to the COM terminal. For high current measurements, use the 10A terminal.
• Dewis Swyddogaeth: Use the dedicated buttons (V, A, Ω, Diode, Continuity) to select the desired measurement function.
• Arddangosfa Darllen: The 6000 count display will show the measurement value, and an analog bargraph provides a visual indication of the reading.

5.3 Storio a Galw Data

The MS6100 allows for extensive data storage on its internal 2G microSD card.

• Saving Waveforms/Setups: Gwasgwch y SAVE RECALL button, then follow the on-screen prompts to save current waveform screens or instrument setups. Up to 1000 items can be stored.
• Adalw Data: Gwasgwch y SAVE RECALL button and navigate to the recall option to view previously saved waveforms or load setups.
• Waveform Recorder: The Waveform Recorder function allows capturing and replaying input waveforms from CH1 and CH2 with a maximum record length of 1000 frames. Access this feature through the Utility menu.

6. cynnal

6.1 Glanhau

Regular cleaning helps maintain the instrument's performance and appearance.

• Sychwch yr achos gyda hysbysebamp brethyn a glanedydd ysgafn. Peidiwch â defnyddio sgraffinyddion neu doddyddion.
• Ensure no liquid enters the instrument.
• Clean the display screen gently with a soft, lint-free cloth.

6.2 Gofal Batri

I ymestyn oes y batri:

• Recharge the battery regularly, even if the instrument is not in frequent use.
• Avoid storing the instrument in extreme temperatures.
• If the instrument will not be used for an extended period, charge the battery to approximately 50% before storage.

6.3 Storio

When not in use, store the MS6100 in its carrying case in a cool, dry place, away from direct sunlight and extreme temperatures.

7. Datrys Problemau

Mae'r adran hon yn darparu atebion i broblemau cyffredin y gallech ddod ar eu traws. Os yw'r broblem yn parhau, cysylltwch â chymorth cwsmeriaid.

8. manylebau

Detailed technical specifications for the Extech MS6100 Digital Oscilloscope.

9. Gwarant a Chefnogaeth

9.1 Gwybodaeth Gwarant

Extech instruments are warranted to be free from defects in parts and workmanship for a specified period from the date of shipment (typically one year). For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Extech website. This warranty does not cover damage from abuse, accident, neglect, alteration, contamination, or abnormal conditions of operation or handling.

9.2 Cefnogaeth Dechnegol

For technical assistance, troubleshooting, or service inquiries, please contact Extech customer support. Before contacting support, please have your product model number (MS6100) and a detailed description of the issue ready. You can find contact information on the official Extech websafle neu yn y ddogfennaeth a ddarparwyd gyda'ch pryniant.

Ymwelwch â'r Siop Extech ar Amazon am fwy o wybodaeth ac adnoddau.