TELEDU 5232

Llawlyfr Defnyddiwr Soced SCATV Gwahanydd R-TV Televes 5232

Model: 5232 | Brand: TELEVES

1. Rhagymadrodd

This user manual provides comprehensive instructions for the installation, operation, and maintenance of the Televes 5232 R-TV Separator SCATV Socket. Designed for efficient signal distribution, this socket ensures reliable connectivity for your television and radio systems. Please read this manual thoroughly before installation and use.

2. Gwybodaeth Diogelwch

Always observe the following safety precautions to prevent damage to the device or injury to yourself:

3. Cynnyrch Drosview

3.1. Nodweddion

The Televes 5232 SCATV Separator Socket is engineered for robust performance and ease of installation. Key features include:

3.2. Cydrannau

The Televes 5232 socket consists of a metal mounting frame and a plastic cover plate with clearly marked TV and R (Radio) ports.

Televes 5232 SCATV R-TV Separator Socket, showing the white cover plate detached from the metal mounting frame.

Ffigur 1: Drosoddview of the Televes 5232 SCATV R-TV Separator Socket, with its cover and mounting frame.

Cefn view of the Televes 5232 metal mounting frame, showing internal connections and the model number.

Ffigur 2: Manwl view of the metal mounting frame, highlighting the internal wiring terminals and model identification.

Blaen view of the white plastic cover plate for the Televes 5232 socket, featuring 'TV' and 'R' labels for the output ports.

Figure 3: Front cover plate of the socket, indicating the TV and Radio output ports.

4. Gosod a Gosod

Follow these steps for proper installation of your Televes 5232 SCATV R-TV Separator Socket:

  1. Paratoi: Ensure the main power supply to the installation area is switched off. Prepare the coaxial cable by stripping the outer jacket, exposing the braiding (mesh), and the inner conductor. Ensure the inner conductor length is between 5-15 mm to prevent short circuits.
  2. Cysylltiad Cebl: Insert the prepared coaxial cable into the F-connector type guide on the metal mounting frame (refer to Figure 2). Use the quick and secure crimping mechanism to firmly fasten the cable. The flange with 3 rows of 9 mm teeth will ensure perfect mesh fastening.
  3. Gosod y Ffrâm: Secure the metal mounting frame into the wall box using appropriate screws.
  4. Attaching the Cover Plate: Once the frame is securely mounted and cables are connected, snap the white plastic cover plate onto the metal frame. Ensure it clicks into place firmly.
  5. Cysylltiadau Terfynol: Connect your television to the port labeled 'TV' and your radio to the port labeled 'R' on the cover plate using appropriate coaxial cables.

After installation, restore power and test the signal reception on your connected devices.

5. Cyfarwyddiadau Gweithredu

The Televes 5232 SCATV R-TV Separator Socket is a passive device that requires no active operation. Once correctly installed and connected, it functions automatically to separate the incoming signal into TV and Radio outputs.

6. cynnal

The Televes 5232 SCATV R-TV Separator Socket requires minimal maintenance. To ensure its longevity and optimal performance:

7. Datrys Problemau

If you experience issues with your Televes 5232 SCATV R-TV Separator Socket, refer to the following common problems and solutions:

ProblemAchos PosiblAteb
No TV/Radio signalLoose cable connection, faulty cable, issue with the main antenna/signal source.Check all cable connections at the socket and to your devices. Ensure the main antenna or signal source is functioning correctly. Try replacing the coaxial cables.
Poor signal quality (e.g., snowy picture, static radio)Loose connections, damaged cables, external interference, weak input signal.Verify all connections are tight. Inspect cables for damage. Ensure the input signal strength is adequate. Consider using higher quality shielded cables.
Only one output (TV or Radio) workingFaulty cable connected to the non-working output, incorrect port usage.Ensure the correct device is connected to the 'TV' and 'R' ports. Test the cable connected to the non-working output with another device or replace it.

If the problem persists after trying these solutions, contact Televes customer support or a qualified technician.

8. manylebau

Detailed technical specifications for the Televes 5232 R-TV Separator SCATV Socket:

8.1. Attenuation Values (dB)

The following table provides the typical attenuation values for different frequency bands:

Technical specification table for Televes 5232, showing attenuation values in dB for various frequency bands including TV, FM, VHF, UHF, and IF SAT.

Figure 4: Technical table detailing attenuation (Tłumienie) in dB across various frequency bands (Pasmo) for the Televes 5232.

AllbwnBandAmlder (MHz)Gwanhau (dB)
TV (Male IEC)TV5...65<8 (K.Zwrt. FM)
TV (Male IEC)TV-0.5 (teledu)
FM (Female IEC)FM-3 (FM)
TV (Male IEC)UHF470...8620.5 (UHF)

Note: Values are typical and may vary slightly depending on installation conditions.

9. Gwarant a Chefnogaeth

For warranty information, please refer to the terms and conditions provided by your retailer or the official Televes website. If you require technical assistance or have questions regarding the Televes 5232 SCATV R-TV Separator Socket, please contact your point of purchase or Televes customer support.

Televes Contact Information: Ymwelwch www.televes.com for regional contact details and support resources.

Dogfennau Cysylltiedig - 5232

Cynview Televes PreampCysylltiadau Lifier: Canllaw Gosod Modelau 560383 a 560483
Canllaw yn manylu ar y gosodiad cysylltiad ar gyfer rhagosodiad antena Televes 560383 (mewnbwn sengl) a 560483 (mewnbwn deuol)amppŵeryddion, sy'n cynnwys uned wedi'i gosod ar fast a chyflenwad pŵer/holltwr dan do.
Cynview Masg Gwyn Televes gyda Soced RJ45 ar gyfer Teledu/R-SAT + DATA
Taflen gynnyrch gynhwysfawr ar gyfer mwgwd gwyn Televes, sy'n cynnwys cysylltwyr TV/R-SAT deuol a soced data RJ45 (Cat. 6) integredig. Mae'r manylion yn cynnwys manylebau ffisegol, nodweddion gwahaniaethol, gwybodaeth am y pecynnu, a chanllaw gosod cam wrth gam.
Cynview Televes EuroSwitch 719502: 5-Input, 6-Output Multiswitch for Satellite and Terrestrial TV
Explore the Televes EuroSwitch 719502, a compact multiswitch designed for efficient satellite and terrestrial TV signal distribution in large installations. Featuring 5 inputs, 6 outputs, low signal losses, and TForce technology for optimal terrestrial signal reception.
Cynview Televes Mini-Repartidor EasyF 2D: Installation and Features
Discover the Televes Mini-Repartidor EasyF 2D, a compact 2-way SMATV signal splitter. Learn about its innovative EasyF connection system, ease of installation, and electrical performance benefits.
Cynview Televes QSD85 85x95cm Aluminum Satellite Dish Antenna - Features & Specifications
Cynhwysfawr drosoddview of the Televes QSD85 85x95cm aluminum satellite dish antenna, detailing its key features, physical and technical specifications, packaging, and installation guide for optimal satellite signal reception.
Cynview Pennawd Mast Televes 2xUHF Ampachubwyr (LTE/4G) - Modelau 536020 a 536021
Manylebau technegol, canllawiau gosod, a chynnyrch drosoddview ar gyfer pen mast Televes 2xUHF amphidlwyr (LTE/4G), modelau 536020 a 536021. Mae'r nodweddion yn cynnwys hidlo LTE integredig ar gyfer signal ampehangu a dosbarthu.