Zap ZAP-71239-RX4

Zap Portable AA Ni-MH Battery Charger

Model: ZAP-71239-RX4

Rhagymadrodd

This manual provides detailed instructions for the safe and efficient use of your Zap Portable AA Ni-MH Battery Charger, Model ZAP-71239-RX4. Please read this manual thoroughly before operating the device and retain it for future reference.

Zap Portable AA Ni-MH Battery Charger with four green AA Ni-MH 1200mAh 1.2V batteries

Image: The Zap Portable AA Ni-MH Battery Charger (white casing with silver trim) shown alongside four green Zap Ni-MH AA 1200mAh 1.2V rechargeable batteries. The charger features LED indicators and a USB port.

Cyfarwyddiadau Diogelwch

Cynnwys Pecyn

Gwiriwch y pecyn am yr eitemau canlynol:

Gosod

  1. Cysylltu â Power: Connect the provided USB charging cable to the charger's input port and then to a compatible USB power source (e.g., computer USB port, USB wall adapter, power bank). The charger's LED indicators may light up to show it is powered.
  2. Mewnosod Batris: Open the battery compartment. Insert one to four AA Ni-MH rechargeable batteries into the designated slots, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the charger.

Cyfarwyddiadau Gweithredu

  1. Tâl Cychwynnol: Once batteries are correctly inserted and the charger is connected to a power source, the charging process will begin automatically.
  2. Dangosyddion LED: The charger features LED indicators to display the charging status.
    • Solid Red/Orange: Indicates batteries are currently charging.
    • Gwyrdd solet: Indicates batteries are fully charged.
    • Fflachio: May indicate an error (e.g., incorrect battery type, faulty battery, or improper insertion). Refer to the Troubleshooting section.
  3. Amser Codi Tâl: Charging time varies depending on the battery capacity and the power output of the USB source. For the included 1200mAh batteries, a full charge typically takes several hours.
  4. Tynnu Batris: Once the LED indicators show a full charge (solid green), disconnect the charger from the power source and carefully remove the charged batteries.

Cynnal a chadw

Datrys problemau

ProblemAchos PosiblAteb
Charger LEDs do not light up.Dim cysylltiad pŵer na chebl diffygiol.Ensure the USB cable is securely connected to both the charger and the power source. Try a different USB cable or power source.
Batteries are not charging (LEDs flashing or not changing).Incorrect battery type, improper insertion, or faulty battery.Verify batteries are Ni-MH AA type. Re-insert batteries ensuring correct polarity. Try charging individual batteries to identify a faulty one.
Mae'r gwefrydd neu'r batris yn mynd yn rhy boeth.Overcharging, faulty battery, or poor ventilation.Immediately disconnect the charger. Ensure proper ventilation around the charger. Do not use damaged or leaking batteries.

Manylebau

Gwarant a Chefnogaeth

For warranty information or technical support, please refer to the documentation included with your purchase or contact Zap customer service through their official website. Please have your model number (ZAP-71239-RX4) and purchase date available when seeking support.

Dogfennau Cysylltiedig - ZAP-71239-RX4

Cynview Botymau Allanfa Digyswllt Zap ACC351-352, Canllaw Cychwyn Cyflym ACC361-362
Canllaw cychwyn cyflym ar gyfer botymau allanfa digyswllt Zap (ACC351, ACC352, ACC361, ACC362), yn manylu ar eu nodweddion, eu gosodiad, eu diffiniadau, eu datrys problemau, a'u manylebau. Dysgwch sut i osod a ffurfweddu'r botymau rhyddhau drws hylan a chyfleus hyn.
Cynview Zap Press To Exit Buttons Quick Start Guide - ACC060-153 Series
Quick start guide for Zap Press To Exit Buttons (ACC060-063, ACC100-103, ACC150-153) from System Q Ltd. Covers installation, definitions, setup examples, connections, troubleshooting, and specifications for access control systems.
Cynview Botymau Gwasgwch i Ymadael: Canllaw Cychwyn Cyflym ACC060-153
Canllaw cychwyn cyflym ar gyfer cyfres botymau Gwasgwch i Ymadael ACC060-063, ACC100-103, ac ACC150-153 Zap. Yn cwmpasu gosod, diffiniadau, sefydlu e.e.amplesau, cysylltiadau, a datrys problemau ar gyfer systemau rheoli mynediad.
Cynview Llawlyfr Cyfarwyddiadau Gwn Syfrdanu ZAP Blast Knuckles Model ZAPBK950
Llawlyfr cyfarwyddiadau ar gyfer y ZAP Blast Knuckles Stun Gun (Model ZAPBK950), yn manylu ar rybuddion diogelwch, gweithrediad, effeithiau, amnewid batri, a gwybodaeth am warant.
Cynview Canllaw Cychwyn Cyflym Botwm Allanfa Sensitif i Gyffwrdd Zap ACC300-301
Mae'r canllaw hwn yn darparu gwybodaeth hanfodol ar gyfer gosod a defnyddio botymau allanfa sensitif i gyffwrdd Zap ACC300-301. Mae'n ymdrin â gosod, gwifrau, diffiniadau, datrys problemau, a manylebau technegol ar gyfer systemau rheoli mynediad.
Cynview Canllaw Cychwyn Cyflym Botwm Allanfa Sensitif i Gyffwrdd Zap ACC300-301
Canllaw cryno ar gyfer botymau allanfa sensitif i gyffwrdd Zap ACC300 ac ACC301. Dysgwch am osod, gwifrau, diffiniadau (NO/NC), datrys problemau, a manylebau ar gyfer systemau rheoli mynediad.