Cynnyrch Drosview
The WENKO Power-Loc Sion Chrome Toilet Paper Holder is designed for easy, drill-free installation using the advanced Power-Loc adhesive system. This system ensures a strong, permanent hold on various surfaces without the need for screws or drilling. The holder features a protective lid and a sophisticated chrome finish, providing both functionality and aesthetic appeal to your bathroom.
- Gosodiad Di-dril: Utilizes the Power-Loc adhesive system for secure mounting without drilling.
- Gafael Cryf: Capable of bearing heavy loads on surfaces like tiles, natural stone, concrete, wood, and many plastics.
- Protective Lid: Features a cover to protect the toilet roll from dust.
- Deunyddiau Gwydn: Constructed from steel and Acrylonitrile-Butadiene-Styrene (ABS) for longevity.
- Symudadwy: Can be removed without leaving residue and repositioned if needed.
Gosod a Gosod
Follow these steps for proper installation of your WENKO Power-Loc Sion Toilet Paper Holder. Ensure the mounting surface is clean and dry before beginning.
- Paratoi'r Arwyneb: Clean the desired mounting surface thoroughly with a suitable cleaner to remove any dirt, grease, or soap residue. Ensure the surface is completely dry before proceeding.
- Cymhwyso Gludydd: Carefully apply the Power-Loc adhesive to the back of the mounting elements. Ensure an even application.
- Attach Mounting Elements: Press the mounting elements firmly onto the prepared wall surface at the desired location. Ensure the screws on the back of the mounting elements are correctly seated in their respective housings.
- Amser halltu: Allow the adhesive to cure for a minimum of 24 awr before attaching the toilet paper holder or applying any load. This curing period is essential for achieving maximum adhesive strength.
- Gosodwch y Deiliad: After the curing time, align the toilet paper holder with the mounting elements and secure it in place.
Image: The WENKO Power-Loc Sion Chrome Toilet Paper Holder securely installed on a tiled bathroom wall, holding a roll of toilet paper.
Cyfarwyddiadau Gweithredu
Using your WENKO toilet paper holder is straightforward:
- Loading a Toilet Roll: Lift the protective lid. Simply hang a standard toilet paper roll onto the holder's arm.
- Dosbarthu: Pull the desired amount of toilet paper from the roll. The protective lid helps keep the roll clean.
Cynnal a Chadw a Gofal
To ensure the longevity and appearance of your WENKO toilet paper holder, follow these care instructions:
- Glanhau: Wipe the chrome surfaces regularly with a soft, damp cloth. For stubborn spots, use a mild, non-abrasive cleaner specifically designed for chrome finishes.
- Osgoi Cemegau llym: Do not use abrasive cleaners, scouring pads, or strong chemical detergents, as these can damage the chrome finish and ABS components.
- Sychu: After cleaning, dry the holder thoroughly with a soft, dry cloth to prevent water spots and maintain its shine.
Datrys problemau
If you encounter any issues with your toilet paper holder, refer to the following common solutions:
| Problem | Achos Posibl | Ateb |
|---|---|---|
| Holder does not stick securely. | Surface was not clean or dry; adhesive did not cure for 24 hours; surface is unsuitable. | Ensure the surface is thoroughly cleaned and dried. Allow the adhesive to cure for the full 24 hours without load. The Power-Loc system is designed for smooth, non-porous surfaces. If the surface is highly textured or porous, the adhesive may not bond effectively. |
| Toilet roll does not fit or rotate smoothly. | Roll is too large or improperly placed. | Ensure you are using a standard-sized toilet paper roll. Verify the roll is correctly hung on the holder's arm, allowing it to rotate freely. |
| Protective lid is loose or damaged. | Wear and tear or improper handling. | Inspect the lid's hinges or attachment points. If damaged, contact WENKO customer support for replacement parts or further assistance. |
Manylebau
| Brand: | WENKO |
| Rhif Model: | 17815 |
| Deunydd: | Acrylonitrile Butadiene Styrene (ABS), Alloy Steel, Plastic |
| Math Gorffen: | Chrome |
| Lliw: | Chrome |
| Math Gosodiad: | Adhesive (Power-Loc System) |
| Dimensiynau Cynnyrch: | 6.69 x 10.04 x 1.81 modfedd (17 x 25.5 x 4.6 cm) |
| Pwysau Eitem: | 11.7 owns (333 gram) |
Gwarant a Chefnogaeth
For warranty information, replacement parts, or further technical assistance, please contact WENKO customer support directly. Refer to the packaging or the official WENKO websafle am y manylion cyswllt diweddaraf.
WENKO Official Websafle: www.wenko.com
