Bewinner 7-in-1 Digital Wall Scanner Stud Finder Detector User Manual

1. Rhagymadrodd

This manual provides detailed instructions for the safe and effective use of your Bewinner 7-in-1 Digital Wall Scanner Stud Finder Detector. This device is designed to accurately locate wood studs, metal objects (such as rebar, copper pipes), and live AC wires behind various wall materials. Please read this manual thoroughly before operation and retain it for future reference.

2. Gwybodaeth Diogelwch

• Always exercise caution when scanning walls, especially when live AC wire detection is indicated.
• Do not rely solely on the detector to determine the presence of live electrical wires. Always turn off power to the area before drilling or cutting into walls.
• Wear appropriate personal protective equipment (PPE) such as safety glasses when drilling or cutting.
• Cadwch y ddyfais yn sych ac yn lân. Peidiwch â'i hamlygu i leithder na thymheredd eithafol.
• Nid yw'r ddyfais hon yn degan. Cadwch allan o gyrraedd plant.
• Gwaredu batris yn gyfrifol yn unol â rheoliadau lleol.

3. Nodweddion Cynnyrch

• 7-in-1 Multifunctional Scanning: Detects wood studs (12mm/25mm/38mm depths), metal (iron/copper/aluminum, >60mm), and live AC wires (up to 51mm).
• Intuitive LCD Display & Guidance: Features a clear backlit LCD screen showing real-time signal strength, complemented by multi-color LED indicators (red/yellow/green) and audible alerts for precise location.
• Easy & Efficient Operation: Automatic calibration upon startup, one-touch mode switching, ergonomic anti-slip grip, and auto power-off after 5 minutes of inactivity to conserve battery.
• Cydnawsedd Arwyneb Amlbwrpas: Effectively scans concrete, tile, wood panels, ceilings, and floors.
• Reliable & Durable Build: Engineered with high-sensitivity sensor chips and a robust ABS housing for consistent, accurate detection.
• Magnet adeiledig: For convenient attachment to metal surfaces during use.

4. Cynnwys Pecyn

• Bewinner 7-in-1 Digital Wall Scanner Stud Finder Detector
• Llawlyfr Defnyddiwr

Note: A 9V battery is required for operation and is not included in the package.

5. Cynllun Dyfais

Ffigur 5.1: Blaen View
This image displays the front of the wall scanner, featuring the central LCD screen and the yellow 'MODE' button below it. The top section has measurement markings in millimeters.

Ffigur 5.2: Yn ôl View
The back of the device is shown, highlighting the battery compartment cover at the bottom and product information labels in the center, including 'Stud Finder' and 'Battery: 6F22 9V'.

Ffigur 5.3: Ochr View
This image illustrates the side profile of the wall scanner, clearly showing the 'SCAN' button located on the left side of the device, which is pressed during scanning operations.

Cydrannau Allweddol:

1. Arddangosfa LCD: Shows detection mode, signal strength, battery status, and center/edge indicators.
2. Botwm MODE: Press to switch between Wood, Metal, and AC Wire detection modes.
3. Botwm SCAN: Located on the side, press and hold during scanning.
4. Ardal Synhwyrydd: Located on the back of the device, this area must be flat against the wall during scanning.
5. Adran Batri: Located on the back, holds one 9V battery.
6. Dangosyddion LED: (Red/Yellow/Green) Provide visual feedback on detection.
7. Rhybudd Clywadwy: Beeps to indicate detection.

6. Gosod

6.1 Gosod Batri

1. Locate the battery compartment cover on the back of the device (refer to Figure 5.2).
2. Sleidwch y clawr yn agored.
3. Mewnosodwch un batri 9V, gan sicrhau'r polaredd cywir (+/-).
4. Caewch y clawr adran batri yn ddiogel.

6.2 Graddnodi Cychwynnol

The device features automatic calibration. To ensure accurate readings:

1. Place the device flat against the wall surface where you intend to scan. Ensure there are no known studs, metal, or wires directly beneath the device during calibration.
2. Press and hold the 'SCAN' button. The device will automatically calibrate. Wait for the calibration process to complete (usually a few seconds) before moving the device.
3. The LCD will show a stable reading, indicating it is ready for use.

7. Cyfarwyddiadau Gweithredu

7.1 Pŵer Ymlaen/Diffodd

The device powers on automatically when the 'SCAN' button is pressed and held. It will automatically shut off after 5 minutes of inactivity to conserve battery life.

7.2 Dewis Modd

Press the 'MODE' button to cycle through the available detection modes:

• Wood Stud Detection: For locating wood studs at 12mm, 25mm, or 38mm depths.
• Canfod Metel: For identifying ferrous and non-ferrous metals (e.g., iron, copper, aluminum) up to >60mm depth.
• Live AC Wire Detection: For detecting live unshielded AC wires (90-250V) up to 51mm depth.

7.3 Gweithdrefn Sganio

1. Select the desired detection mode using the 'MODE' button.
2. Place the device flat against the wall surface.
3. Press and hold the 'SCAN' button. Ensure the device is calibrated on a clear section of the wall.
4. Slowly slide the device horizontally across the wall surface. Keep it flat and maintain constant contact.
5. Observe the LCD display and listen for audible alerts.
6. When an object is detected, the signal strength bars on the LCD will increase, and LED indicators will light up (yellow/red). An audible beep will also sound.
7. Mark the edges of the detected object. Continue scanning past the object, then scan back from the opposite direction to confirm the edges and locate the center. The center indicator on the LCD will illuminate when the center is found.

7.4 Specific Detection Notes

• Stydiau Pren: The device will indicate the edges and center of wood studs. For deeper studs, ensure the appropriate depth mode is selected.
• Metel: The device detects both ferrous and non-ferrous metals. It will indicate the presence and approximate location.
• Live AC Wires: Detection is most effective for unshielded, live wires. Always confirm power is off before any work. The detection depth for AC wires can be affected by wall material and moisture.

8. cynnal

• Glanhau: Sychwch y ddyfais gyda meddal, damp brethyn. Peidiwch â defnyddio glanhawyr neu doddyddion sgraffiniol.
• Storio: Store the device in a dry, cool place away from direct sunlight and extreme temperatures. If storing for extended periods, remove the battery to prevent leakage.
• Amnewid Batri: Replace the 9V battery when the low battery indicator appears on the LCD.

9. Datrys Problemau

10. manylebau

11. Gwarant a Chefnogaeth

For warranty information or technical support, please refer to the documentation provided at the point of purchase or contact your retailer. Keep your purchase receipt as proof of purchase.