1. Rhagymadrodd
Thank you for choosing the POOLEX JETPOWER 120 Full Inverter Pool Heat Pump. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your heat pump. Please read this manual thoroughly before installation and use, and keep it for future reference.
The JETPOWER 120 utilizes advanced Full Inverter technology to provide efficient and quiet heating and cooling for your pool, ensuring optimal water temperature from spring to autumn. Its integrated Wi-Fi connectivity allows for convenient control via a smartphone application.
Delwedd 1.1: Blaen view of the POOLEX JETPOWER 120 Full Inverter Pool Heat Pump, showcasing its design and branding.
2. Gwybodaeth Diogelwch
Cyfarwyddiadau Diogelwch Pwysig:
- Darllenwch yr holl gyfarwyddiadau cyn defnyddio'r teclyn hwn.
- Installation must be performed by a qualified professional in accordance with local and national electrical and plumbing codes.
- Gwnewch yn siŵr bod y cyflenwad pŵer yn cyd-fynd â manylebau'r pwmp gwres.
- Do not operate the heat pump if any part is damaged or malfunctioning.
- Cadwch blant ac anifeiliaid anwes i ffwrdd o'r uned yn ystod y llawdriniaeth.
- Peidiwch â rhwystro'r fentiau cymeriant aer na'r fentiau gwacáu aer.
- Datgysylltwch y pŵer bob amser cyn gwneud unrhyw waith cynnal a chadw neu atgyweiriadau.
3. Cynnwys Pecyn
Gwiriwch fod yr holl eitemau yn bresennol yn y pecyn:
- POOLEX JETPOWER 120 Heat Pump Unit
- Pecyn cymorth gwrth-ddirgryniad
- PVC connectors Ø 50mm 1'' ½
- Pibell draen cyddwyso
- Pecyn cynnal a chadw
- Llawlyfr defnyddiwr amlieithog (y ddogfen hon)
- Estyniad rheoli gwifredig (10m)
Image 3.1: Included accessories. From left to right: Heat pump on wooden pallet (for delivery), anti-vibration supports, PVC connectors, winter cover, condensate drain hose, and maintenance kit with manual.
4. Gosod a Gosod
Proper installation is crucial for the performance and longevity of your heat pump. Consult a qualified professional for installation.
4.1. Dewis Safle
- Choose a well-ventilated outdoor location, away from direct sunlight and heat sources.
- Ensure sufficient clearance around the unit for proper airflow (refer to the diagram in the full manual for specific distances).
- Place the unit on a stable, level surface, using the provided anti-vibration supports.
4.2. Cysylltiadau Plymio
The heat pump should be installed in the pool's filtration circuit, after the filter and before any chemical treatment systems.
- Connect the pool water inlet to the "IN" port and the outlet to the "OUT" port using the supplied PVC connectors (Ø 50mm 1'' ½).
- Gwnewch yn siŵr bod yr holl gysylltiadau'n dal dŵr.
- Gosodwch y bibell draenio cyddwysiad i gyfeirio dŵr cyddwys i ffwrdd o waelod yr uned.
Delwedd 4.1: Ochr view of the heat pump, illustrating the "IN" (inlet) and "OUT" (outlet) water connections. A pressure gauge is visible at the top left.
4.3. Cysylltiadau Trydanol
- Connect the heat pump to a dedicated electrical circuit with appropriate protection (circuit breaker).
- Refer to the specifications section for power requirements.
- Use the wired control extension (10m) to position the LED control panel conveniently.
5. Cyfarwyddiadau Gweithredu
The POOLEX JETPOWER 120 is designed for user-friendly operation with its LED control panel and Wi-Fi connectivity.
5.1. Cychwyn Cychwynnol
- Gwnewch yn siŵr bod system hidlo'r pwll yn rhedeg a bod dŵr yn cylchredeg drwy'r pwmp gwres.
- Trowch y pŵer trydanol ymlaen i'r pwmp gwres.
- The LED control panel will illuminate. Follow the on-screen prompts to set the desired water temperature.
5.2. Full Inverter Technology
The Full Inverter technology allows the heat pump to continuously vary the speed of its compressor and fan. This results in:
- Effeithlonrwydd Ynni: Up to 35% energy savings compared to ON/OFF heat pumps by avoiding consumption peaks.
- Gweithrediad Tawel: Reduced noise levels, especially when maintaining the set temperature.
- Gwresogi Cyflym: The system can boost capacity for faster temperature increases when needed.
5.3. Reversible Heating/Cooling
The JETPOWER 120 can both heat and cool your pool water. This feature is particularly useful for smaller above-ground pools prone to overheating, which can encourage algae growth.
- Select the desired mode (heating or cooling) via the control panel or smartphone app.
5.4. Cysylltedd Wi-Fi
Control your heat pump remotely using the dedicated smartphone application. Refer to the separate Wi-Fi setup guide for detailed instructions on connecting your device.
- Download the POOLEX app from your device's app store.
- Follow the in-app instructions to pair your heat pump.
- Monitor and adjust settings from anywhere.
6. cynnal
Mae cynnal a chadw rheolaidd yn sicrhau perfformiad gorau posibl ac yn ymestyn oes eich pwmp gwres.
6.1. Gwiriadau Arferol
- Glanhewch yr Uned: Periodically clean the exterior of the unit to remove dust and debris. Ensure air intake and exhaust vents are clear.
- Gwirio Llif Dŵr: Ensure adequate water flow through the heat pump. A reduced flow can impact efficiency.
- Draen cyddwysiad: Verify that the condensate drain hose is clear and draining properly.
6.2. Paratoi ar gyfer y gaeaf
Before winter or when temperatures drop below freezing, it is essential to properly winterize your heat pump:
- Datgysylltwch y cyflenwad pŵer i'r uned.
- Drain all water from the heat pump's plumbing.
- Disconnect the water inlet and outlet pipes.
- Cover the unit with the provided winter cover (or a suitable protective cover) to protect it from harsh weather.
7. Datrys Problemau
Mae'r adran hon yn mynd i'r afael â phroblemau cyffredin y gallech ddod ar eu traws. Am broblemau mwy cymhleth, cysylltwch â chymorth cwsmeriaid.
| Problem | Achos Posibl | Ateb |
|---|---|---|
| Heat pump does not start | No power supply; Circuit breaker tripped; Control panel error | Check power connection; Reset circuit breaker; Consult control panel manual for error codes. |
| Gwresogi/oeri annigonol | Low water flow; Dirty evaporator coils; Incorrect temperature setting; Ambient temperature too low/high | Check pool pump and filter; Clean coils; Verify settings; Operate within recommended temperature range. |
| Swn anarferol | Cydrannau rhydd; Rhwystr ffan; Problem gyda'r cywasgydd | Inspect for loose parts; Clear any obstructions from fan; If compressor issue, contact support. |
| Gollyngiad dŵr | Condensation (normal); Loose plumbing connections; Internal leak | Verify if it's condensation (normal during operation); Tighten connections; For internal leaks, contact support. |
8. manylebau
Technical specifications for the POOLEX JETPOWER 120 heat pump:
| Nodwedd | Manyleb |
|---|---|
| Rhif Model | PC-SLP120N/BO |
| Ffynhonnell Pwer | AC |
| Dimensiynau (L x W x H) | 86.5 x 37.5 x 65.6 cm |
| Pwysau | 26 kg |
| Cyfrol Pwll a Argymhellir | 45 i 65 m³ |
| COP (26°C Air / 26°C Water) | Hyd at 16 |
| Oergell | R32 |
| Ymarferoldeb | Gwresogi / Oeri / Auto |
9. Gwarant a Chefnogaeth
POOLEX is committed to customer satisfaction. For warranty information, please refer to the warranty card included with your product or visit the official POOLEX websafle.
- Cefnogaeth i Gwsmeriaid: If you have any questions, require technical assistance, or need to report an issue, please visit the POOLEX websafle neu cysylltwch â'ch deliwr lleol.
- Rhannau sbâr: Information regarding spare parts availability is currently unavailable. Please contact customer support for specific part inquiries.
- Yn dychwelyd: This product is eligible for 30-day returns.
Note: The seller "eRobot Piscine" provides 30-day returns and legal guarantees.